Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

All prices are in USD

Bulk

QTY	Unit Price	Ext Price
7,417	$0.218	$1,620.614

TIP41-C

Manufacturer

Secos
Manufacturer's Part Number

TIP41-C
Description

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Power Dissipation (Abs): 65 W; Maximum Collector Current (IC): 6 A;
Datasheet

Datasheet

7417 In Stock

Popular Products

IRLML6401TRPBF

International Rectifier

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;

Details

NUP2105LT1G

Onsemi

NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.

Details

DRV5053VAQLPG

Texas Instruments

Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.

Details

LM317TG

Onsemi

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;

Details

2N7002

Secos

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;

Details

NE555DR

Texas Instruments

NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.

Details

SMBJ18CA

Sensitron Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138

NXP Semiconductors

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;

Details

LM317T

Inchange Semiconductor

Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;

Details

BSS138BKW,115

NXP Semiconductors

NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.

Details

1N4148

Microsemi

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

ULN2803A

Motorola

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;

Details

2N2222A

Philips Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

1N4148

Continental Device India

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

MBR130T1G

Onsemi

MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.

Details

SMBJ18CA

Zowie Technology

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Mde Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM2675M-ADJ/NOPB

Texas Instruments

LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.

Details

ERJ3EKF1002V

Panasonic

Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.

Details

1N4148WS

Weitron Technology

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

TIP41-C Technical Details

TYPE	DESCRIPTION
Nominal Transition Frequency (fT):	3 MHz
Package Body Material:	PLASTIC/EPOXY
Maximum Collector Current (IC):	6 A
Configuration:	SINGLE
Transistor Element Material:	SILICON
Transistor Application:	SWITCHING
Sub-Category:	Other Transistors
Surface Mount:	NO
Terminal Finish:	Tin/Lead (Sn/Pb)
No. of Terminals:	3
Maximum Power Dissipation (Abs):	65 W
Terminal Position:	SINGLE
Package Style (Meter):	FLANGE MOUNT
JESD-30 Code:	R-PSFM-T3
No. of Elements:	1
Package Shape:	RECTANGULAR
Terminal Form:	THROUGH-HOLE
Maximum Operating Temperature:	150 Cel
Case Connection:	COLLECTOR
Maximum Power Dissipation Ambient:	65 W
JEDEC-95 Code:	TO-220AB
Polarity or Channel Type:	NPN
Minimum DC Current Gain (hFE):	15
JESD-609 Code:	e0
Qualification:	Not Qualified
Maximum Collector-Emitter Voltage:	100 V
Additional Features:	LEADFORM OPTIONS ARE AVAILABLE
Maximum VCEsat:	1.5 V

Category Top Products

BD679

Central Semiconductor

NPN; Configuration: DARLINGTON; Surface Mount: NO; Nominal Transition Frequency (fT): 1 MHz; Maximum Power Dissipation (Abs): 40 W; Maximum Collector Current (IC): 4 A;

TIP112

Ge Industrial Solutions

NPN; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Power Dissipation (Abs): 50 W; Maximum Collector Current (IC): 2 A; Package Shape: RECTANGULAR;

TIP35C

Onsemi

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Power Dissipation (Abs): 125 W; Maximum Collector Current (IC): 25 A;

TIP29C

Micro Commercial Components

Power Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Power Dissipation (Abs): 30 W; Maximum Collector Current (IC): 1 A;

TIP41C

General Transistor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Power Dissipation (Abs): 65 W; Maximum Collector Current (IC): 6 A;

D44H8

Motorola

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 50 MHz; Maximum Collector Current (IC): 10 A; Package Shape: RECTANGULAR;

TIP142

Texas Instruments

TIP142 by Texas Instruments is a NPN power BJT with 125W max power dissipation, 10A max collector current, and 150°C max operating temp. Ideal for high-power applications like motor control and industrial automation due to its Darlington configuration with built-in resistor.

SBCP56-10T1G

Onsemi

SBCP56-10T1G by Onsemi is a NPN BJT transistor with 80V VCEO, 1A IC, and 130MHz fT. Ideal for amplifier applications, it comes in a small outline package with Gull Wing terminals for surface mounting. With a max power dissipation of 1.5W and operating temp up to 150°C, it offers reliable performance in various electronic designs.

BCP56-16-TP

Micro Commercial Components

Micro Commercial Components' BCP56-16-TP is a NPN Power BJT with VCEsat of 0.5V, hFE of 100, and IC of 1A. Ideal for applications requiring high power dissipation up to 1.5W in small outline packages. Suitable for surface mount designs operating b/w -55°C to 150°C.