Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

BU52272NUZ-ZE2

Manufacturer

ROHM
Manufacturer's Part Number

BU52272NUZ-ZE2
Description

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; Output Range: 0.2-1.6V; Termination Type: SOLDER;
Datasheet

Datasheet

Not In Stock

Popular Products

BAV99

Rfe International

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MMBT3904LT1G

Onsemi

MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.

Details

LM358N

NXP Semiconductors

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

BSS138

Panjit International

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;

Details

ULN-2803A

Sprague Electric

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Pro-an Electronic

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;

Details

BAV99

Sangdest Microelectronics (Nanjing)

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

North American Philips Discrete Products Div

RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;

Details

LM358N

Motorola

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

FT232RL-TUBE

FTDI

FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.

Details

BAV99

Jgd Semiconductors

RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;

Details

SMBJ18CA

Hy Electronic

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Changzhou Galaxy Century Microelectronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Itt Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

SMBJ18CA

Mde Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM2931Z-5.0RPG

Onsemi

LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.

Details

1552200253

Molex

WIRE AND CABLE;

Details

BSS138

Infineon Technologies

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;

Details

1N4148WS

Bytesonic Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

FDD5614P

Fairchild Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;

Details

BU52272NUZ-ZE2 Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	1.65 V
Minimum Range Of Magnetic Field:	1.2 mT
Maximum Operating Current:	.008 mA
Maximum Supply Voltage:	3.6 V
Output Range:	0.2-1.6V
Output Type:	VOLTAGE OUTPUT
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	SURFACE MOUNT
Body Width:	1.1 inch
Sensors or Transducers Type:	MAGNETIC FIELD SENSOR,HALL EFFECT
Maximum Magnetic Field Range:	3.2 mT
Package Shape or Style:	RECTANGULAR
Termination Type:	SOLDER
Body Height:	.43 mm
Body Length/Diameter:	1.4 mm
Maximum Operating Temperature:	85 Cel
Hysteresis:	.4 mT

Category Top Products

TLE49462LHALA1

Infineon Technologies

TLE49462LHALA1 by Infineon is a magnetic field sensor with 18V max supply voltage, 4mT hysteresis, and 6mA max operating current. Ideal for applications requiring digital current output in a plastic housing, such as automotive systems, industrial automation, and consumer electronics.

AH1809-P-B

Diodes Incorporated

Diodes Inc. AH1809-P-B is a Hall Effect magnetic field sensor with 2.5-5.5V supply, 1.5mT hysteresis, and 0.30V output range. Ideal for applications requiring precise magnetic field detection in the -40 to 125°C temperature range, such as automotive sensors and industrial control systems.

DRV5053VAQLPG

Texas Instruments

Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.

91SS12-2

Micro Switch

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 10mA; Sensitivity (mV/G): 7.5 mV/G;

TLE4998P8DXUMA1

Infineon Technologies

TLE4998P8DXUMA1 by Infineon is a magnetic field sensor with 4.5-5.5V supply voltage range, -40 to 125°C operating temperature, and 0-5mA digital current output. Ideal for applications requiring precise magnetic field detection in compact spaces like automotive sensors and industrial automation systems.

MMC5603NJ

Memsic

Magnetic Field Sensors;

BU52053NVX-TR

ROHM

ROHM's BU52053NVX-TR is a magnetic field sensor with 1.8V power supply, 0.9mT hysteresis, and 3.6V max supply voltage. It is a Hall effect sensor for detecting magnetic fields in applications like automotive systems and industrial controls due to its compact rectangular shape and surface mounting feature.

DRV5055A3QLPG

Texas Instruments

DRV5055A3QLPG by Texas Instruments is a magnetic field sensor with a max supply voltage of 3.63V and an output range of -1-1mA. It is commonly used in applications such as automotive, industrial, and consumer electronics for measuring magnetic fields.

AH3574-SA-7

Diodes Incorporated

MAGNETIC FIELD SENSOR,HALL EFFECT; Terminal Finish: MATTE TIN; JESD-609 Code: e3;

DRV5055A2ELPGQ1

Texas Instruments

DRV5055A2ELPGQ1 by Texas Instruments is a magnetic field sensor with a supply voltage range of 3V to 3.63V and operating temperature from -40°C to 150°C. It features an output range of -1-1mA, making it ideal for automotive applications requiring precise analog current outputs in harsh environments compliant with AEC-Q100 standards.

SS466A

Micro Switch

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 150 Cel;

TLE4945-2L

Siemens

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; Termination Type: SOLDER; Maximum Operating Current: 8 mA;

MMC5883MA

Memsic

MMC5883MA by Memsic is a MAGNETIC FIELD SENSOR with 2.16-3.6V supply voltage range and -40 to 85°C operating temperature. It offers a digital voltage output interface, ideal for surface mount applications in various industries. Measuring 3x3mm, this sensor provides an output range of 0.36-1.44V for precise magnetic field detection.

TLE4953HALA1

Infineon Technologies

TLE4953HALA1 by Infineon is a magnetic field sensor with 4.5-20V supply, -500mT to 500mT range, and 16.8mA max current. Ideal for applications requiring precise magnetic field detection in a compact rectangular package with through-hole mounting.

APS12200LUAA

Allegro MicroSystems

MAGNETIC FIELD SENSOR,HALL EFFECT;

A3211ELHLT-T

Allegro MicroSystems

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Output Type: DIGITAL CURRENT; Package Shape or Style: RECTANGULAR; Body Height: .95 mm;

AH49HNTR-G1

Diodes Incorporated

AH49HNTR-G1 by Diodes Inc. is a Hall effect magnetic field sensor with 3-8V supply, 3-terminals, and 105°C max temp. Ideal for detecting magnetic fields in automotive applications due to its voltage output, -40 to 105°C operating range, and surface mounting feature.

DRV5056Z4QDBZT

Texas Instruments

Texas Instruments' DRV5056Z4QDBZT is a magnetic field sensor with 3 terminals, operating from -40 to 125°C. It has a supply voltage range of 3-5.5V and output current up to 1A, suitable for Hall effect applications in various industries. The sensor outputs an analog current within the -1-1mA range, featuring a unipolar input mode and surface mounting feature.

SNDH-T4L-G01

Honeywell Sensing And Control

Honeywell SNDH-T4L-G01 is a Hall effect magnetic field sensor with 4.5-18V supply voltage range, -40 to 150°C operating temperature, and 20A max output current. It features a cylindrical design with wire termination and flange mounting, suitable for industrial automation and automotive applications.

HMC1052L-TR

Honeywell

Honeywell's HMC1052L-TR is a magnetic field sensor with 1.8V to 20V supply voltage range, -40°C to 125°C operating temperature, and 10mA max current. It features a digital voltage output and 1000 ohm resistance, making it ideal for surface mount applications requiring precise magnetoresistive sensing capabilities.