R1612-27.000-8-F-1530-TR by Raltron Electronics

Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

R1612-27.000-8-F-1530-TR

Manufacturer

Raltron Electronics
Manufacturer's Part Number

R1612-27.000-8-F-1530-TR
Description

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 15 ppm; Aging: 1 PPM/YEAR; Minimum Operating Temperature: -10 Cel; Load Capacitance: 8 pF;
Datasheet

Datasheet

Not In Stock

Popular Products

LM358N

NXP Semiconductors

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

OPA2277UA/2K5

Texas Instruments

OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.

Details

LM358N

National Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

FT232RL-REEL

FTDI

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

Details

2N2222A

Nte Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;

Details

LAN8720A-CP-TR

Microchip Technology

LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.

Details

M39029/56-351

Defense Logistics Agency

CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;

Details

2N2222A

Secos

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;

Details

2N7002

Bytesonic Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;

Details

1N4148WS

Diodes Incorporated

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M39029/58360

Souriau

CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;

Details

BSS138

National Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;

Details

LM358M

Onsemi

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

BAV99

Kec

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MBRS130LT3G

Rochester Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MBRA340T3G

Onsemi

MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.

Details

LM317AEMP/NOPB

National Semiconductor

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;

Details

LL4148

Kec

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

CRGCQ0805F10R

TE Connectivity

TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.

Details

SS495ASP

Micro Switch

The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.

Details

R1612-27.000-8-F-1530-TR Technical Details

TYPE	DESCRIPTION
Load Capacitance:	8 pF
Frequency Tolerance:	15 ppm
Frequency Stability:	30 %
Series Resistance:	150 ohm
Terminal Finish:	GOLD
JESD-609 Code:	e4
Minimum Operating Temperature:	-10 Cel
Mounting Feature:	SURFACE MOUNT
Drive Level:	50 uW
Nominal Operating Frequency:	27 MHz
Aging:	1 PPM/YEAR
Physical Dimension:	1.6mm X 1.25mm X 0.32mm
Crystal or Resonator Type:	PARALLEL - FUNDAMENTAL
Maximum Operating Temperature:	60 Cel

Category Top Products

ATS250-E

Cts

SERIES - FUNDAMENTAL; Mounting Feature: THROUGH HOLE MOUNT; Frequency Tolerance: 30 ppm; Aging: 5 PPM/YEAR; Additional Features: AT CUT; Maximum Operating Temperature: 85 Cel;

ABLS-25.000MHZ-B-2-F-T2

Abracon

ABLS-25.000MHZ-B-2-F-T2 by Abracon is a 25 MHz crystal oscillator with 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, such as telecommunications equipment or industrial automation systems. Operating temperature range from -20 to 70 °C with surface mount feature for easy installation.

445A35J25M00000

Cts

The Cts 445A35J25M00000 is a crystal oscillator with a frequency tolerance of 30 ppm and frequency stability of 50%. It is commonly used in applications requiring precise timing, such as telecommunications and industrial automation.

ABL-6.000MHZ-B2

Abracon

PARALLEL - FUNDAMENTAL; Mounting Feature: THROUGH HOLE MOUNT; Frequency Tolerance: 20 ppm; Aging: 5 PPM/YEAR; Drive Level: 100 uW; JESD-609 Code: e3;

ABS10-32.768KHZ-1-T

Abracon

Abracon's ABS10-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz frequency, such as IoT devices and wearables.

HC49S-20-30-50-70-12-ATF

Multicomp Pro

HC49S-20-30-50-70-12-ATF by Multicomp Pro is a crystal oscillator with 30 ppm frequency tolerance, 50% stability, and 40 ohm series resistance. Ideal for applications requiring a parallel-fundamental type resonator at 20 MHz, operating b/w -20°C to 70°C.

ABLS-20.000MHZ-B-2-T

Abracon

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 5 PPM/FIRST YEAR; Load Capacitance: 18 pF; Minimum Operating Temperature: -20 Cel;

NX5032GA-25.000M-STD-CSK-4

Nihon Dempa Kogyo

NX5032GA-25.000M-STD-CSK-4 by Nihon Dempa Kogyo is a 25 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, it operates b/w -10 to 70 °C, featuring gold terminal finish and surface mounting.

ABM11W-27.0000MHZ-8-D1X-T3

Abracon

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 10 ppm; Aging: 2 PPM/FIRST YEAR; Series Resistance: 100 ohm; Additional Features: TR, 7 INCH;

CM200S32.768KDZF-UT

Citizen Finedevice

Citizen Finedevice's CM200S32.768KDZF-UT crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as precision timekeeping in temperature ranges from -40 to 85 °C. Its compact size of 7.9mm x 3.7mm x 2.4mm makes it suitable for surface mount installations with low power consumption at 1 uW drive level.

LFXTAL003206

Iqd Frequency Products

Quartz Crystals;

ABMM2-32.000MHZ-E2-F-T

Abracon

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 2 PPM/FIRST YEAR; Drive Level: 100 uW; Additional Features: AT CUT;

ABM3B-18.432MHZ-B-2-T

Abracon

ABM3B-18.432MHZ-B-2-T by Abracon is a 18.432 MHz crystal oscillator with 20 ppm frequency tolerance and 50% stability, suitable for parallel - 3rd overtone applications. It operates b/w -20 to 70 °C, has a series resistance of 50 ohm, and features nickel/gold terminal finish.

ECS-.327-7-34B-TR

Ecs International

ECS-0.327-7-34B-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing in temperature-sensitive environments. Operates at 0.032768 MHz with GOLD terminal finish and surface mounting feature.

ATS049A

Cts

ATS049A by Cts is a crystal oscillator with 30 ppm frequency tolerance, 50% stability, and 120 ohm series resistance. Ideal for applications requiring precise timing at 4.9152 MHz, it operates b/w -20 to 70 °C with low aging of 5 PPM/YEAR.

MH32768B

Euroquartz

Euroquartz MH32768B crystal oscillator operates at 0.032768 MHz with 20 ppm frequency tolerance and 126% stability. Ideal for applications requiring precise timing, such as in telecommunications and industrial automation systems.

9C-27.000MAAE-T

Txc

9C-27.000MAAE-T by Txc is a 27 MHz Crystal Oscillator with 30 ppm Frequency Tolerance and 30% Stability. Ideal for applications requiring precise timing in electronics, telecommunications, and industrial equipment due to its high accuracy and low aging rate of 5 PPM/YEAR.

ABM8AIG-8.000MHZ-8-V1R-T

Abracon

ABM8AIG-8.000MHZ-8-V1R-T by Abracon is an 8 MHz crystal oscillator with 10 ppm frequency tolerance and 150% stability. Ideal for applications requiring precise timing, it operates b/w -40 to 150 °C, featuring a parallel-fundamental crystal type and surface mounting feature.

ABM8W-52.0000MHZ-7-J1Z-T3

Abracon

Abracon's ABM8W-52.0000MHZ-7-J1Z-T3 is a 52 MHz crystal oscillator with 10 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing in temperature ranges from -40 to 105°C, such as telecommunications equipment and industrial automation systems.

AB26TRQ-32.768KHZ-T

Abracon

AB26TRQ-32.768KHZ-T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 65000 ohm series resistance. Ideal for applications requiring precise timing such as IoT devices, wearables, and communication equipment due to its 0.032768 MHz nominal operating frequency and surface mounting feature.