Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

1952283

Manufacturer

Phoenix Contact
Manufacturer's Part Number

1952283
Description

BARRIER STRIP TERMINAL BLOCK; Mounting Type: CONNECTOR; Fastening Method: PUSH-IN; Additional Features: STANDARD: UL 94V-0, PBT; Wire Gauge: 16 AWG; Voltage (Rated): 160 V;
Datasheet

Datasheet

Not In Stock

Popular Products

PIC18F4550-I/PT

Microchip Technology

PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.

Details

ISO1050DUBR

Texas Instruments

ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.

Details

LM358N

Fairchild Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

2N2222A

NXP Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;

Details

B340A-13-F

Diodes Incorporated

B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.

Details

EPCS4SI8N

Intel

EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.

Details

BAV99

Rfe International

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM107H

General Electric Solid State

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;

Details

SS14

SPC TECHNOLOGY/ MULTICOMP

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Taiwan Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

1N4148

Compensated Devices

RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;

Details

ULN2803A

Vishay Intertechnology

NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;

Details

OPA2277UA

Burr-Brown Corporation

OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Micro Commercial Components

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

International Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

MBR0520LT1

Onsemi

MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.

Details

1N4148WT

Good-ark Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Temic Semiconductors

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N2222A

National Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;

Details

1N5819HW-7-F

Diodes Incorporated

1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.

Details

1952283 Technical Details

TYPE	DESCRIPTION
Mounting Style:	Connector
Other Names:	FMC1.5/4-ST-3.5 FMC 1.5/4-ST-3.5 1952283-ND 277-6050
Total Ways:	4
Total Rows:	1
Fastening Style:	Push-In
Wire Gauge:	16 AWG
Total Decks:	1
Rated Voltage:	160 V
Wire Cross Section:	1.5 mm²
Product Type:	Barrier Strip Terminal Block
Safety Compliance:	CB; CUL; EAC; UL; VDE
Additional Features:	Standard: UL 94V-0, PBT
Rated Current:	8 A

Category Top Products

1776228-1

TE Connectivity

TE Connectivity's 1776228-1 is a BARRIER STRIP TERMINAL BLOCK with 4 ways, rated for 20A current and 300V voltage. It uses SCREW fastening method and supports 12 AWG wire gauge. Ideal for CABLE mounting applications, it holds CSA and UL safety approvals.

D-436-37-COLD

TE Connectivity

BUTT TERMINAL; Mounting Type: CABLE; Wire Gauge: 16 AWG; Safety Approval: UL; Wire Cross Section: 7.54 mm2;

33466

TE Connectivity

RING TERMINAL; Wire Gauge: 6 AWG; No. of Ways: 1; Safety Approval: UL; Terminal Gender: FEMALE; Wire Cross Section: 16.8 mm2;

1066

Ntt

LUG TERMINAL; Additional Features: MATERIAL: STEEL; FINISH: TIN;

11725-2

Eaton Corporation

Eaton Corporation's 11725-2 is a STRIP TERMINAL BLOCK for CABLE mounting. It has UL, CSA, CE safety approvals with 600V rated voltage and 70A current capacity. Ideal for 2 AWG wire gauge applications requiring secure SCREW fastening in electrical systems.

8-640903-1

TE Connectivity

TE Connectivity's 8-640903-1 is a FEMALE PUSH-ON TERMINAL with UL approval, rated for 300V voltage and 18 AWG wire gauge. Ideal for applications requiring 0.96 mm2 wire cross section such as automotive and industrial electrical connections.

1SNK705065R0000

Abb

MODULAR TERMINAL BLOCK; Mounting Type: DIN RAIL; Wire Gauge: 12 AWG; Voltage (Rated): 600 V; Wire Cross Section: 2.5 mm2; Safety Approval: UL;

34137

Tyco Electronics Amp

BUTT TERMINAL; Wire Gauge: 14 AWG; Wire Cross Section: 2.62 mm2; Terminal Gender: FEMALE;

325300

TE Connectivity

WIRE TERMINAL; Wire Gauge: 0 AWG; Wire Cross Section: 60 mm2; Safety Approval: UL; Terminal Gender: FEMALE;

1273-1

Litton Industries

PCB TERMINAL; Manufacturer Series: 1273; Terminal Gender: MALE;

2002-1611/1000-541

Wago

MODULAR TERMINAL BLOCK;

34138

Tyco Electronics Amp

BUTT TERMINAL; Wire Gauge: 10 AWG; Terminal Gender: FEMALE; Wire Cross Section: 6.64 mm2;

1803594

Phoenix Contact

Phoenix Contact 1803594 is a UL-approved modular terminal block for cables with 16 AWG wire gauge. It supports up to 160V voltage and 8A current, with a wire cross section of 1.5mm2. Ideal for applications requiring secure screw fastening in a 4-way configuration.

7701

Keystone Electronics

POWER TERMINAL; Wire Gauge: 14 AWG;

231-337/001-000

Wago

Wago 231-337/001-000 is a 7-way strip terminal block with 300V rated voltage and 10A current. It features CSA, IEC, UL safety approvals and connector fastening method. Ideal for board mounting applications in various industries requiring reliable electrical connections.

1803426

Phoenix Contact

The Phoenix Contact 1803426 is a BARRIER STRIP TERMINAL BLOCK with 2 ways, rated for 8A current and 160V voltage. It has safety approvals from CB, CCA, CSA, CUL, EAC, and UL. Ideal for BOARD mounting applications with wire gauge up to 15 AWG and wire cross section of 1.5 mm².

3105-3-00-21-00-00-08-0

Mill-max Mfg

PCB TERMINAL; Terminal Gender: MALE;

1745904

Phoenix Contact

The Phoenix Contact 1745904 is a Barrier Strip Terminal Block with 3 ways, rated for 8A current and 160V voltage. It features a push-in fastening method and accepts wire gauge up to 16 AWG (1.5 mm2). Ideal for industrial applications requiring secure electrical connections.

1-164

Bel Fuse

Bel Fuse 1-164 is a dual-row barrier strip terminal block with CSA & UL approval. Rated for 250V voltage, 15A current, and accepts 14 AWG wire. Ideal for industrial control panels, power supplies, and automation applications.

3571

Keystone Electronics

TAB TERMINAL;