Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

1840405

Manufacturer

Phoenix Contact
Manufacturer's Part Number

1840405
Description

BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Additional Features: PA, UL 94V-0; Wire Gauge: 16 AWG; Voltage (Rated): 160 V;
Datasheet

Datasheet

Not In Stock

Popular Products

1N4148

Comchip Technology

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

AT90CAN128-16AU

Microchip Technology

AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.

Details

1N4148

Transys Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SMBJ18CA

Jgd Semiconductors

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;

Details

LM2931AZ-5.0G

Onsemi

LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.

Details

LM7805CT

Comset Semiconductors

Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;

Details

LM358M

Texas Instruments

LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.

Details

2N7002

Promax-johnton

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;

Details

2N2222A

Onsemi

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;

Details

SS14

Continental Device India

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM78L05ACMX/NOPB

Texas Instruments

LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.

Details

MBRS340T3G

Onsemi

MBRS340T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 4A. It operates b/w -65°C to 150°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package. The diode's matte tin terminal finish and dual position make it ideal for surface mount PCB designs.

Details

1N4148WT

Taitron Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Tt Electronics Plc

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;

Details

LL4148

Changzhou Starsea Electronics

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

1552200253

Molex

WIRE AND CABLE;

Details

2N7002

Rectron

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;

Details

MMBT2907ALT1G

Onsemi

MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.

Details

SMBJ18CA

Mde Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

OPA2277UA/2K5

Texas Instruments

OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.

Details

1840405 Technical Details

TYPE	DESCRIPTION
Wire Cross Section:	1.5 mm²
No. of Decks:	1
Current (Rated):	8 A
Fastening Method:	Screw
Voltage (Rated):	160 V
Additional Features:	PA, UL 94V-0
No. of Rows:	1
No. of Ways:	6
Mounting Type:	Board
Terminal & Terminal Block Type:	Barrier Strip Terminal Block
Safety Approval:	CB; CCA; CSA; CUL; GOST; UL
Wire Gauge:	16 AWG

Category Top Products

32957

Tyco Electronics Amp

RING TERMINAL; Wire Gauge: 16 AWG; Voltage (Rated): 600 V; Safety Approval: UL; Wire Cross Section: 2 mm2; Terminal Gender: FEMALE;

221-412

Wago

The Wago 221-412 is a barrier strip terminal block with 2 ways, rated for 32A current and 450V voltage. It supports wire gauge up to 12 AWG and wire cross section of 4mm2. Ideal for applications requiring secure connections in industrial settings.

621

Tyco Electronics Amp

MODULAR TERMINAL BLOCK; Mounting Type: CABLE; Fastening Method: SCREW; Additional Features: POLYAMIDE; Wire Gauge: 10 AWG; Voltage (Rated): 300 V;

DRA1-CMXE100D10

Sensata Technologies

MODULAR TERMINAL BLOCK; Mounting Type: DIN RAIL; Fastening Method: SCREW; Voltage (Rated): 100 V; No. of Decks: 1; No. of Ways: 4;

74611-47

Molex

Molex 74611-47 is a BARRIER STRIP TERMINAL BLOCK with 11 ways, rated for 30A current and 300V voltage. It uses SCREW fastening method, suitable for BOARD mounting in applications requiring CSA/UL safety approval and accommodating 10 AWG wire gauge.

MS25036-149

Panduit

RING TERMINAL; Additional Features: NYLON; Wire Gauge: 18 AWG; Voltage (Rated): 600 V; Safety Approval: CSA; UL; Wire Cross Section: 1.5 mm2;

19070-0123

Molex

RING TERMINAL; Wire Gauge: 10 AWG; Wire Cross Section: 5 mm2; Terminal Gender: FEMALE; Manufacturer Series: 19070;

64319-1201

Molex

FORK TERMINAL; Manufacturer Series: 64319;

12129493

Delphi Connection Systems

PUSH-ON TERMINAL; Wire Cross Section: 3 mm2; Manufacturer Series: 12; Terminal Gender: FEMALE;

1546670-3

Tyco Electronics Elcon

BARRIER STRIP TERMINAL BLOCK; Mounting Type: CABLE AND PANEL; Fastening Method: SCREW; Additional Features: STANDARD: UL94V-0, THERMOPLASTIC; Wire Gauge: 14 AWG; Voltage (Rated): 300 V;

MSTBVA2,5/3-G-5,08

Phoenix Contact

Phoenix Contact's MSTBVA2,5/3-G-5,08 is a 3-way strip terminal block with a rated voltage of 320V and current of 12A. It is approved by CB, CCA, CSA, CUL, EAC, and UL for safety. Ideal for board mounting applications using connector fastening method.

MS-25036-116

Molex

RING TERMINAL; Manufacturer Series: MS-25036; Terminal Gender: FEMALE;

190070040

Molex

PUSH-ON TERMINAL; Wire Gauge: 10 AWG; Manufacturer Series: 19007; Terminal Gender: FEMALE;

2-796634-2

TE Connectivity

TE Connectivity 2-796634-2 is a STRIP TERMINAL BLOCK with 22 ways, rated for 15A current and 300V voltage. It supports wire gauge up to 12 AWG (3 mm²) and mounting type CABLE. Ideal for applications requiring UL safety approval.

221-412/K194-4045

Wago

Wago 221-412/K194-4045 is a UL-approved barrier strip terminal block with 2 ways, rated for 32A current and 450V voltage. It supports wire gauge up to 12 AWG and wire cross-section of 4mm2, ideal for cable mounting applications.

12507

Beau Interconnect

BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Wire Gauge: 16 AWG; Voltage (Rated): 300 V; Safety Approval: CSA; UL;

MS25036-101

Defense Logistics Agency

RING TERMINAL; Wire Gauge: 16 AWG; Voltage (Rated): 300 V; Safety Approval: UL; Wire Cross Section: 1.42 mm2; No. of Ways: 1;

19002-0002

Molex

PUSH-ON TERMINAL; Wire Gauge: 18 AWG; Manufacturer Series: 19002; Wire Cross Section: .8 mm2; Terminal Gender: FEMALE;

280-901

Wago

MODULAR TERMINAL BLOCK; Mounting Type: DIN RAIL; Fastening Method: SPRING LOADED; Additional Features: CAGE CLAMP; Wire Gauge: 12 AWG; Voltage (Rated): 600 V;

1840382

Phoenix Contact

The Phoenix Contact 1840382 is a modular terminal block with 4 ways, rated for 8A current and 160V voltage. It features screw fastening method and accepts wire gauge up to 16 AWG (1.5 mm²). Ideal for cable mounting applications, UL approved for safety compliance.