Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

All prices are in USD

Bulk

QTY	Unit Price	Ext Price
1,380	$1.159	$1,599.420

NBA3N012CSNT1G

Manufacturer

Onsemi
Manufacturer's Part Number

NBA3N012CSNT1G
Description

LINE RECEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

1380 In Stock

Popular Products

2N2222A

Tesla Elektronicke Soucastky

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

1N4148

Diotec Semiconductor Ag

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

ULN2803A

Onsemi

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;

Details

BSS138

Good-ark Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;

Details

BAV99W-7-F

Diodes Incorporated

Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.

Details

LM358DR2G

Onsemi

LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.

Details

OPA2227UA

Texas Instruments

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

Details

LM358AN

Fairchild Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

MMBT3904LT1G

Onsemi

MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.

Details

SS14

Taitron Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LP2950CDT-3.3G

Onsemi

LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.

Details

TM4C1294NCPDTI3

Texas Instruments

TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.

Details

BSS123NH6327XTSA1

Infineon Technologies

Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.

Details

SMBJ18CA

Telefunken Microelectronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138W-7-F

Diodes Incorporated

Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.

Details

LL4148-GS08

Vishay Telefunken

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LL4148

Excel (Suzhou) Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

SN65HVD230DR

Texas Instruments

SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.

Details

1N4148WS

Onsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

261

Mercury Systems

Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;

Details

NBA3N012CSNT1G Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	3 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	3.3 V
Maximum Time At Peak Reflow Temperature (s):	30
Maximum Seated Height:	1.45 mm
Surface Mount:	YES
Terminal Finish:	NICKEL PALLADIUM GOLD
No. of Terminals:	5
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH
Screening Level:	AEC-Q100
JESD-30 Code:	R-PDSO-G5
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Maximum Operating Temperature:	125 Cel
Package Code:	LSSOP
Interface Standard:	EIA-644-A; TIA-644-A
Interface IC Type:	LINE RECEIVER
Width:	1.6 mm
Moisture Sensitivity Level (MSL):	1
Other Names:	NBA3N012CSNT1GOSCT NBA3N012CSNT1GOSTR NBA3N012CSNT1GOSDKR
Input Characteristics:	DIFFERENTIAL SCHMITT TRIGGER
Maximum Supply Voltage:	3.6 V
Differential Output:	NO
JESD-609 Code:	e4
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Receiver No. of Bits:	1
Length:	2.9 mm
Maximum Receive Delay:	3.5 ns
Peak Reflow Temperature (C):	260
Terminal Pitch:	.95 mm
Temperature Grade:	AUTOMOTIVE

Category Top Products

SN65HVD3082EDRG4

Texas Instruments

SN65HVD3082EDRG4 by Texas Instruments is a CMOS Line Driver & Receiver with 8 terminals. It operates at 5V, has a max supply voltage of 5.5V, and supports EIA-485-A interface standard. Ideal for industrial applications requiring differential output and Schmitt trigger input characteristics.

MAX3160EEAP+T

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SSOP; Package Shape: RECTANGULAR;

AD2428WCCSZ01

Analog Devices

AD2428WCCSZ01 by Analog Devices is a Line Transceiver with DMOS technology. It operates at -40 to 105°C, with a supply voltage range of 1.7-1.98V and output current up to 1.5A. Ideal for industrial applications requiring open-drain output characteristics in a compact chip carrier package.

MAX232EEPE

Rochester Electronics

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;

MAX485CPA

Maxim Integrated

MAX485CPA by Maxim Integrated is a Line Driver & Receiver with 5V supply, 60ns transmit delay, and 200ns receive delay. It is used in EIA-422/EIA-485 interface applications due to its CMOS technology and differential output for reliable data transmission.

ISL3280EIHZ-T7A

Renesas Electronics

LINE RECEIVER; JESD-609 Code: e3; Terminal Finish: Matte Tin (Sn) - annealed;

ISL3330IAZ

Renesas Electronics

ISL3330IAZ by Renesas Electronics is a Line Driver & Receiver with 2 functions, operating at 3.15-3.45V. It features EIA-232 interface standard, BICMOS technology, and Schmitt trigger input characteristics. Ideal for industrial applications requiring reliable communication over short distances.

SP3072EEN-L/TR

Exar

Exar's SP3072EEN-L/TR is a line transceiver with 1 driver and receiver bit. It operates at a max supply voltage of 3.6V and has a small outline package style. This IC is suitable for applications requiring EIA-422, EIA-485, or TIA-485 interface standards.

MAX3232EEUE+T

Analog Devices

MAX3232EEUE+T by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at -40 to 85 °C. It supports EIA-232, TIA-232 interfaces and has a max supply voltage of 5.5 V. Ideal for industrial applications requiring BICMOS technology and Schmitt trigger input characteristics.

MAX3221EEAE+T

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR;

SN65C3232EDR

Texas Instruments

SN65C3232EDR by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at -40 to 85°C. It has a max supply voltage of 3.6V and peak reflow temperature of 260°C. Ideal for industrial applications requiring EIA-232 interface standard and inverted output polarity.

MAX3232EIDRE4

Texas Instruments

The Texas Instruments MAX3232EIDRE4 is a Line Driver & Receiver with 16 terminals, operating at 3.3/5V. It features EIA-232-F, TIA-232-F, V.28 interface standards and Schmitt trigger input characteristics. Ideal for industrial applications requiring reliable data transmission over short distances with low power consumption.

ISL3280EIHZ-T

Renesas Electronics

ISL3280EIHZ-T by Renesas Electronics is a Line Receiver IC with 5 terminals, operating at 3.3V nominal voltage. It features EIA-485 and EIA-422 interface standards, with a max receive delay of 60ns. This industrial-grade device is ideal for applications requiring differential Schmitt trigger input characteristics in compact designs.

MAX3221ECAE+T

Analog Devices

Analog Devices' MAX3221ECAE+T is a Line Driver & Receiver with 16 terminals, operating at 3-5.5V. It features a max output low current of 1.6A and supports interface standards EIA-232, TIA-232, V.24, V.28 for applications requiring reliable data transmission in commercial temperature environments up to 70°C.

ISO3080DW

Texas Instruments

ISO3080DW by Texas Instruments is a line driver & receiver with 16 terminals, operating at -40 to 85°C. It features a max transmit delay of 1.3 ns, differential output, and interface standards EIA-422/485 for industrial applications requiring high-speed data transmission.

THVD1450DRB

Texas Instruments

LINE TRANSCEIVER;

SN65HVD78DGK

Texas Instruments

SN65HVD78DGK by Texas Instruments is a line driver/receiver with 3.6V max supply voltage, 15ns max transmit delay, and 8A max output low current. Ideal for automotive applications, it operates in temperatures from -40 to 125°C and interfaces using EIA-422/EIA-485 standards.

ST232CDR

STMicroelectronics

ST232CDR by STMicroelectronics is a Line Driver & Receiver with 2 functions, operating at 5V. It has a max supply voltage of 5.5V and operates in temperatures ranging from 0 to 70°C. Ideal for EIA-232, TIA-232, V.28 interfaces in commercial applications.

SP330EEY-L/TR

Exar

Exar SP330EEY-L/TR is a 24-terminal line driver/receiver with EIA-485, EIA-422, and EIA-232 interface standards. It operates b/w -40 to 85°C, supporting differential output and input characteristics using a 3.3V nominal voltage. Ideal for industrial applications requiring reliable communication over short distances.

MAX3232ECUP+

Analog Devices

MAX3232ECUP+ by Analog Devices is a Line Driver & Receiver with 20 terminals, operating at 3-5.5V. It features BICMOS technology, EIA-232 interface standard, and Schmitt trigger input characteristics. Ideal for applications requiring reliable data transmission in commercial temperature range of 0-70°C.