Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

MC33063AD

Manufacturer

Onsemi
Manufacturer's Part Number

MC33063AD
Description

SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Datasheet

Datasheet

Not In Stock

Popular Products

SS495ASP

Micro Switch

The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.

Details

2N2222A

Tt Electronics Plc

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;

Details

2N7002,215

NXP Semiconductors

2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.

Details

1N4148

Continental Device India

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148

Itt Components

RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;

Details

LM358AN

Texas Instruments

LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.

Details

OPA2277UA/2K5

Burr-Brown Corporation

OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

1N4148

Sinyork

RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;

Details

STM32H743XIH6

STMicroelectronics

STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.

Details

MBR0520LT1

Motorola

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WT

Changzhou Galaxy Century Microelectronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WS

Sinyork

RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;

Details

BAV99

Itt Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Minilogic Device

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;

Details

FDV304P

Onsemi

The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.

Details

TM4C1294NCPDTI3

Texas Instruments

TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.

Details

DS18B20Z+T&R

Analog Devices

DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.

Details

FDC5614P

TAIZHOU ELECTRONICS CO LTD

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;

Details

IRLML6402TRPBF

Infineon Technologies

IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.

Details

BSS138BKW,115

NXP Semiconductors

NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.

Details

MC33063AD Technical Details

TYPE	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Control Mode:	VOLTAGE-MODE
Maximum Time At Peak Reflow Temperature (s):	30
Width (mm):	3.9 mm
Maximum Seated Height:	1.75 mm
Maximum Output Current:	1.5 A
Sub-Category:	Switching Regulator or Controllers
Surface Mount:	YES
Terminal Finish:	TIN LEAD
Switcher Config:	BUCK-BOOST
No. of Terminals:	8
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
Technology:	BIPOLAR
JESD-30 Code:	R-PDSO-G8
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Maximum Operating Temperature:	85 Cel
Package Code:	SOP
Control Technique:	PULSE WIDTH MODULATION
Moisture Sensitivity Level (MSL):	1
Maximum Switching Frequency:	100 kHz
Minimum Input Voltage:	3 V
Maximum Input Voltage:	40 V
JESD-609 Code:	e0
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Qualification:	Not Qualified
Package Equivalence Code:	SOP8,.25
Nominal Input Voltage:	5 V
Other IC type:	SWITCHING REGULATOR
Length:	4.9 mm
Peak Reflow Temperature (C):	235
Terminal Pitch:	1.27 mm
Temperature Grade:	INDUSTRIAL

Category Top Products

LM2674M-5.0

Texas Instruments

LM2674M-5.0 by Texas Instruments is a voltage-mode switching regulator with a max output current of 0.5A and a nominal output voltage of 5V, suitable for automotive applications. It operates in a buck configuration, supporting input voltages from 6.5V to 40V and offering a max operating temperature of 125°C.

MC34063AP1G

Shenzhen Changyuntong Ic Design

SWITCHING REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;

LM2576T-ADJ

Texas Instruments

LM2576T-ADJ by Texas Instruments is a switching regulator with max output voltage of 37V and max output current of 7.5A. It operates b/w -40 to 125°C, suitable for automotive applications. Control mode is voltage-mode PWM with a switching frequency of up to 63kHz, ideal for buck configuration.

LM27762DSST

Texas Instruments

LM27762DSST by Texas Instruments is a switching regulator with 2 outputs, max output current of 0.25A, and max switching frequency of 2200kHz. Ideal for industrial applications requiring pulse frequency modulation control technique in a small outline package with dual terminals.

LMZ31710RVQR

Texas Instruments

LMZ31710RVQR by Texas Instruments is a current-mode switching regulator with max output voltage of 5.5V and max output current of 10A. Ideal for industrial applications, it operates b/w -40 to 85°C, making it suitable for various electronic devices requiring efficient power management in compact spaces.

LM2576T-ADJ

First Components International

SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;

LM2594M-ADJ/NOPB

Texas Instruments

LM2594M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with a max output current of 0.5A and a max output voltage of 37V. It operates in the automotive temperature grade range (-40 to 125°C) and is ideal for applications requiring pulse width modulation control, such as buck converter circuits.

LTC1144IS8#PBF

Linear Technology

SWITCHED CAPACITOR CONVERTER; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

MC34063AP

Onsemi

SWITCHING REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;

LMZ23603TZX/NOPB

Texas Instruments

LMZ23603TZX/NOPB by Texas Instruments is a switching regulator with 3A output current, 950 kHz max switching frequency, and 85°C max operating temp. Ideal for industrial applications requiring a compact design and efficient power management in the voltage range of 6V to 36V.

LM25011AQ1MY/NOPB

Texas Instruments

LM25011AQ1MY/NOPB by Texas Instruments is a switching regulator with a 12V nominal input voltage, 2A max output current, and 2000 kHz max switching frequency. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and small outline package style.

TPS54821RHLR

Texas Instruments

TPS54821RHLR by Texas Instruments is a switching regulator with 8A output current, 1600kHz max switching frequency, and 125°C max operating temp. Ideal for automotive applications due to its -40 to 125°C temp range, BUCK switcher config, and 12V nominal input voltage.

LMR14203XMK/NOPB

Texas Instruments

LMR14203XMK/NOPB by Texas Instruments is a switching regulator with 6 terminals, operating b/w -40 to 125°C. It offers a max output voltage of 34V and current of 0.3A, suitable for automotive applications due to its compact size and pulse width modulation control technique.

LM2574M-5.0/NOPB

Texas Instruments

LM2574M-5.0/NOPB by Texas Instruments is a switching regulator with a voltage-mode control technique, operating b/w -40 to 125°C. It has a max output current of 0.5A and supports a buck switcher configuration for automotive applications. With a small outline package style, it offers an output voltage range from 3.3V to 37V, making it suitable for various power supply designs.

LM2675M-12/NOPB

Texas Instruments

LM2675M-12/NOPB by Texas Instruments is a switching regulator with a max output current of 1A and a max output voltage of 37V. It is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.

LM2596S-ADJ

National Semiconductor

SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES;

LM5575QMHX/NOPB

National Semiconductor

Switching Regulator or Controllers; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE, THIN PROFILE, SHRINK PITCH;

LTM4622IY#PBF

Linear Technology

SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 25; Package Code: BGA; Package Shape: SQUARE; Surface Mount: YES;

UC3843BVD1R2G

Onsemi

UC3843BVD1R2G by Onsemi is a current-mode switching controller with max output current of 1A and max switching frequency of 500kHz. Ideal for industrial applications, it operates b/w -40 to 105°C, with input voltage range from 12-25V.

LM5022MM/NOPB

Texas Instruments

LM5022MM/NOPB by Texas Instruments is a current-mode switching controller with a buck-boost switcher config. It operates b/w -40 to 125°C, supporting input voltages from 6V to 60V and output voltages ranging from 1.25V to 300V at a max output current of 0.1A. Ideal for automotive applications due to its small outline and high switching frequency of up to 2200 kHz.