Image shown is a representation only. Exact specifications should be obtained from the product data sheet.
A6A-16RS
-
ManufacturerOmron
-
Manufacturer's Part NumberA6A-16RS
-
DescriptionROTARY CODED SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: HEXADECIMAL; Type (Actuator): SHAFT TYPE; Contact Function: ON-ON; End Contact Plating: GOLD OVER SILVER;
-
Datasheet
Not In Stock
Popular Products
1N4148WT
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Details
LM317TG
Texas Instruments
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
Details
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
Details
2N7002
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
Details
1N4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Details
SMBJ18CA
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
Details
1N4148W-T
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Details
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
Details
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
Details
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
Details
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
Details
2N2222A
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Details
BAV99
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Details
MBRS340T3G
Onsemi
MBRS340T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 4A. It operates b/w -65°C to 150°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package. The diode's matte tin terminal finish and dual position make it ideal for surface mount PCB designs.
Details
LL4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Details
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Details
LL4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Details
M39029/56-351
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
Details
SMBJ18CA
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
Details
1N4148WS
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DetailsA6A-16RS Technical Details
| TYPE | DESCRIPTION |
|---|---|
| Maximum DC Contact Current: | .1 A |
| No. of Positions: | 16 |
| Center Contact Plating: | GOLD OVER SILVER |
| Center Contact Material: | PHOSPHOR BRONZE |
| Length (Bushing): | 0 inch |
| Type (Actuator): | SHAFT TYPE |
| Switch Action: | LATCHED |
| Terminal Material: | BERYLLIUM COPPER |
| Termination Type: | SOLDER |
| Electrical Life: | 2000 Cycle(s) |
| Maximum Operating Temperature: | 70 Cel |
| Material (Actuator): | POLYACETAL |
| Contact Resistance: | 200 mohm |
| Insulation Resistance: | 10000000 ohm |
| End Contact Material: | PHOSPHOR BRONZE |
| No. of Switch Sections: | 1 |
| Maximum DC Contact Voltage: | 28 V |
| DC Maximum Rating R Load (Contact): | .1A@28VDC |
| Dielectric Withstand Volts (V): | 500VAC |
| Contact Function: | ON-ON |
| PCB Hole Count: | 5 |
| Switch Type: | ROTARY CODED SWITCH |
| Indexing Angle: | 22.5 deg |
| Minimum Operating Temperature: | -10 Cel |
| Mounting Feature: | THROUGH HOLE-STRAIGHT |
| Body Width: | 10 inch |
| Switch Function: | HEXADECIMAL |
| Contact Timing: | BREAK-BEFORE-MAKE |
| Terminal Length: | .126 inch |
| Length (Actuator): | .287 inch |
| End Contact Plating: | GOLD OVER SILVER |
| Insulator Material: | POLYBUTYLENE TEREPHTHALATE |
| Body Height: | 5.9 mm |
| Additional Features: | WITH O-RING |
| Body Length/Diameter: | 10 mm |
