Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

NX5032GA-16.000M-STD-CSU-2

Manufacturer

Nihon Dempa Kogyo
Manufacturer's Part Number

NX5032GA-16.000M-STD-CSU-2
Description

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 50 ppm; Drive Level: 10 uW; Maximum Operating Temperature: 150 Cel; Series Resistance: 120 ohm;
Datasheet

Datasheet

Not In Stock

Popular Products

1N4148

Transys Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SMBJ18CA

Eic Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

NXP Semiconductors

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

OPA2277UA

Texas Instruments

OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.

Details

BSS138

General Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;

Details

PIC18F4550-I/P

Microchip Technology

PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.

Details

1N4148WS

Formosa Microsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Bytesonic Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Continental Device India

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148

Good-ark Electronics

RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;

Details

M24308/2-1F

Adi Electronics

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;

Details

LL4148

Taiwan Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

M39029/58-360

Carlisle Interconnect Technologies

GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;

Details

SMBJ18CA

Rectron

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MBR0520LT1G

Onsemi

MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.

Details

2N2222A

Itt Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

BAV99

SPC TECHNOLOGY/ MULTICOMP

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WT

Fairchild Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ERJ2RKF1002X

Panasonic

Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.

Details

2N7002-T1-E3

Vishay Intertechnology

Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.

Details

NX5032GA-16.000M-STD-CSU-2 Technical Details

TYPE	DESCRIPTION
Load Capacitance:	8 pF
Frequency Tolerance:	50 ppm
Frequency Stability:	150 %
Series Resistance:	120 ohm
Terminal Finish:	Gold (Au) - with Nickel (Ni) barrier
JESD-609 Code:	e4
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	SURFACE MOUNT
Drive Level:	10 uW
Nominal Operating Frequency:	16 MHz
Physical Dimension:	L5.0XB3.2XH1.3 (mm)/L0.197XB0.126XH0.051 (inch)
Crystal or Resonator Type:	PARALLEL - FUNDAMENTAL
Maximum Operating Temperature:	150 Cel

Category Top Products

8Y-19.200MEEQ-T

Txc

8Y-19.200MEEQ-T by Txc is a crystal oscillator with 10 ppm frequency tolerance and 10% stability, ideal for applications requiring precise timing. With a parallel-fundamental crystal type and 19.2 MHz operating frequency, it offers reliable performance in various electronic devices. Featuring surface mounting feature and compact dimensions of 2mm x 1.6mm x 0.5mm, it is suitable for space-constrained designs where size matters.

MA-40612.0000M-G0:ROHS

Seiko Epson

Seiko Epson's MA-40612.0000M-G0:ROHS crystal oscillator offers 12 MHz nominal frequency, 50 ppm tolerance, and 30% stability. Ideal for applications requiring precise timing in a temperature range of -20°C to 70°C, such as telecommunications equipment and industrial automation systems.

ABM11W-40.0000MHZ-4-K1Z-T3

Abracon

ABM11W-40.0000MHZ-4-K1Z-T3 by Abracon is a 40 MHz crystal oscillator with 10 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing in temperature ranges from -40 to 125 °C, such as telecommunications equipment and industrial automation systems.

Q13MC1462000612

Seiko Epson

Seiko Epson's Q13MC1462000612 crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 45000 ohm series resistance. Ideal for applications requiring precise timing at a frequency of 0.032768 MHz. Suitable for surface mount installations in various electronic devices operating b/w -40 to 85 °C.

RH100-8.000-10-1010-EXT-TR

Raltron Electronics

Raltron Electronics' RH100-8.000-10-1010-EXT-TR crystal oscillator offers 10 ppm frequency tolerance and 10% stability, with a series resistance of 800 ohm. Ideal for applications requiring precise timing at an operating frequency of 8 MHz, it features gold terminal finish and surface mounting feature.

ABM8G-20.000MHZ-B-4-Y-T

Abracon

ABM8G-20.000MHZ-B-4-Y-T by Abracon is a 20 MHz crystal oscillator with 30 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, such as telecommunications equipment or industrial automation systems. Features include gold over nickel terminal finish, surface mounting feature, and low drive level of 10 uW.

ABM7-25.000MHZ-D-2-Y-T

Abracon

ABM7-25.000MHZ-D-2-Y-T by Abracon is a 25 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, such as telecommunications equipment or industrial automation systems.

Q13MC3061000314

Seiko Epson

Q13MC3061000314 by Seiko Epson is a crystal oscillator with 20 ppm frequency tolerance and 144% stability. Operating at 0.032768 MHz, it features a series resistance of 50000 ohm and load capacitance of 12.5 pF. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, this surface mount device offers reliable performance in compact dimensions of L8.0XB3.8XH2.54 (mm).

ECS-.327-12.5-34QCS-TR

Ecs International

ECS-0.327-12.5-34QCS-TR by Ecs International is a crystal oscillator with 10 ppm frequency tolerance, 400% stability, and 70000 ohm series resistance. It operates at 0.032768 MHz, ideal for applications requiring precise timing in temperature ranges from -40 to 125 °C. Suitable for surface mount setups due to its compact size of 3.2mm x 1.5mm x 0.9mm.

NX3225GA-20.000M-STD-CRG-2

Nihon Dempa Kogyo

NX3225GA-20.000M-STD-CRG-2 by Nihon Dempa Kogyo is a 20 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing in a temperature range of -40 to 85°C, it features surface mounting and low drive level of 10 uW.

TSX-322525.0000MF18X-W3

Seiko Epson

TSX-322525.0000MF18X-W3 by Seiko Epson is a 25 MHz crystal oscillator with 10 ppm frequency tolerance and 18% stability. Ideal for applications requiring precise timing, such as telecommunications equipment or industrial automation systems. Operating temperature range from -40 to 85 °C ensures reliable performance in various environments.

NX5032GA-25.000M-STD-CSK-4

Nihon Dempa Kogyo

NX5032GA-25.000M-STD-CSK-4 by Nihon Dempa Kogyo is a 25 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, it operates b/w -10 to 70 °C, featuring gold terminal finish and surface mounting.

CC7V-T1A32.768KHZ12.5PF+/-20PPM

Micro Crystal Ag

Micro Crystal Ag's CC7V-T1A32.768KHZ12.5PF+/-20PPM is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing at frequencies around 0.032768 MHz in a compact surface mount package.

9C-24.000MEEJ-T

Txc

9C-24.000MEEJ-T by Txc is a 24 MHz Crystal Oscillator with 10 ppm Frequency Tolerance, 10% Stability, and 30 ohm Series Resistance. Ideal for applications requiring precise timing in temperature range of -20 to 70 °C, such as telecommunications and networking equipment.

MS1V-T1K32.768KHZ12.5PF+/-20PPMTAQC

Micro Crystal Ag

MS1V-T1K32.768KHZ12.5PF+/-20PPMTAQC by Micro Crystal Ag is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 60000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.

ABMM-6.000MHZ-B-2-T

Abracon

ABMM-6.000MHZ-B-2-T by Abracon is a 6 MHz crystal oscillator with 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, such as telecommunications equipment or industrial automation systems.

ABM13W-80.0000MHZ-6-N2Y-T5

Abracon

ABM13W-80.0000MHZ-6-N2Y-T5 by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 30% frequency stability, and 25 ohm series resistance. It is used in applications requiring precise timing at a nominal operating frequency of 80 MHz.

FOXSDLF/160-20

Fox Electronics

FOXSDLF/160-20 by Fox Electronics is a 16 MHz crystal oscillator with 30 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, it operates b/w -20 to 70 °C, features Tin/Silver/Copper finish, and has low aging at 5 PPM/YEAR.

CM7V-T1A-32.768KHZ-7PF-20PPM-TA-QC

Micro Crystal Ag

CM7V-T1A-32.768KHZ-7PF-20PPM-TA-QC by Micro Crystal Ag is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 126% stability. Ideal for applications requiring precise timing, it operates b/w -40°C to 85°C, features gold over nickel terminal finish, and has a compact size of 3.2mm x 1.5mm x 0.65mm for surface mount installation.

FKFSREIHM0.032768-T3

Abracon

Abracon's FKFSREIHM0.032768-T3 crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices or industrial sensors. Operating range from -40 to 85 °C with matte tin finish and surface mount feature.