Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

NJM78L12UA-(TE2)

Manufacturer

New Japan Radio
Manufacturer's Part Number

NJM78L12UA-(TE2)
Description

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: FLAT; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Qualification Status: Not Qualified;
Datasheet

Datasheet

Not In Stock

Popular Products

LM107H/883

Linear Technology

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;

Details

2N7002

Changzhou Galaxy Century Microelectronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;

Details

1N5819HW-7-F

Diodes Incorporated

1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.

Details

SZNUP2105LT1G

Onsemi

SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.

Details

LL4148

Good-ark Electronics

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BSS138DW-7-F

Diodes Incorporated

BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.

Details

U.FL-R-SMT-1(10)

Hirose Electric

U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.

Details

C0603X104K5RACAUTO

KEMET Corporation

C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.

Details

BAV99

Lite-on Technology

RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;

Details

06035C104KAT2A

KYOCERA AVX

06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.

Details

2N2222A

Forward International Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;

Details

2N2222A

Space Power Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

USB3320C-EZK-TR

Microchip Technology

Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.

Details

SS14

General Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

FDC5614P

MSKSEMI SEMICONDUCTOR

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;

Details

BAV99

Kec

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WT

Changzhou Galaxy Century Microelectronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M39029/58360

Souriau

CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;

Details

SS14

Bytesonic Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MMBF170LT1G

Onsemi

MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.

Details

NJM78L12UA-(TE2) Technical Details

TYPE	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Maximum Line Regulation:	.25 %
Maximum Seated Height:	1.8 mm
Sub-Category:	Other Regulators
Surface Mount:	YES
Regulator Type:	FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR
Terminal Finish:	TIN BISMUTH
No. of Outputs:	1
Maximum Output Current-1:	.1 A
No. of Terminals:	3
Terminal Position:	SINGLE
Package Style (Meter):	SMALL OUTLINE
Technology:	BIPOLAR
Maximum Load Regulation:	.1 %
JESD-30 Code:	R-PSSO-F3
Package Shape:	RECTANGULAR
Terminal Form:	FLAT
Nominal Output Voltage-1:	12 V
Maximum Operating Temperature:	85 Cel
Qualification Status:	Not Qualified
Width:	2.5 mm
Maximum Input Voltage Absolute:	35 V
Minimum Input Voltage:	14.5 V
Maximum Output Voltage-1:	12.6 V
Maximum Input Voltage:	27 V
Minimum Output Voltage-1:	11.4 V
JESD-609 Code:	e6
Minimum Operating Temperature:	-40 Cel
Maximum Voltage Tolerance:	5 %
No. of Functions:	1
Package Equivalence Code:	TO-243
Length:	4.5 mm
Adjustability:	FIXED
Terminal Pitch:	1.5 mm

Category Top Products

UA78L12ACPK

Texas Instruments

UA78L12ACPK by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 12V and max current of 0.1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in compact spaces. The package style is small outline with low profile, ideal for surface mount designs where space is limited.

LM78L05ACZ

Rochester Electronics

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-92; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;

L7806CV-DG

STMicroelectronics

STMicroelectronics L7806CV-DG is a fixed positive single output standard regulator with 1A max output current. It offers a nominal output voltage of 6V, max input voltage of 19V, and operating temperature range from 0 to 125°C. Ideal for applications requiring stable voltage regulation in electronic circuits.

UA78L05CLPR

Texas Instruments

UA78L05CLPR by Texas Instruments is a fixed positive single output standard regulator with an operating temperature range of 0 to 125°C. It has a max output current of 0.1A and can handle input voltages up to 30V, making it suitable for various applications requiring stable voltage regulation.

NCP785AH120T1G

Onsemi

NCP785AH120T1G by Onsemi is a fixed positive single output standard regulator with an operating temperature range of -40 to 85°C. It offers a nominal output voltage of 12V, max load regulation of 0.12%, and max input voltage of 450V. Ideal for applications requiring precise voltage regulation in compact spaces.

L7809ACD2T-TR

STMicroelectronics

L7809ACD2T-TR by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 9V and max current of 1A. It operates within a temperature range of 0 to 150°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices. The package style is small outline with gull wing terminals, ideal for surface mount assembly.

MC7808CT

Fairchild Semiconductor

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;

MC78L12ACDR2G

Onsemi

MC78L12ACDR2G by Onsemi is a fixed positive single output standard regulator with 12V nominal output voltage and 0.1A max output current. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs.

L7824CV-DG

STMicroelectronics

L7824CV-DG by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 24V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse projects.

NCP781BMN033TAG

Onsemi

NCP781BMN033TAG by Onsemi is a CMOS technology fixed positive single output standard regulator with 3.3V nominal output voltage and 0.1A max output current. It operates in temperature range of -40 to 125 °C and has a package style of small outline, heat sink/slug. Ideal for applications requiring precise voltage regulation in compact spaces.

LM78L12ACZ/LFT3

Texas Instruments

LM78L12ACZ/LFT3 by Texas Instruments is a fixed positive single output standard regulator with an operating temperature range of 0 to 125°C. It has a nominal output voltage of 12V and can handle a max output current of 0.1A. This regulator is commonly used in applications that require stable and reliable power supply.

NCV7808BTG

Onsemi

NCV7808BTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 8V and a max output current of 1A. It operates in temperatures ranging from -40°C to 125°C and is commonly used in automotive applications due to its AEC-Q100 screening level.

MC7805CT-BP

Micro Commercial Components

MC7805CT-BP by Micro Commercial Components is a fixed positive single output standard regulator with 3 terminals. It operates b/w 0-125°C, providing a nominal output voltage of 5V with ±3% tolerance. Ideal for applications requiring a max output current of 1A and input voltage range of 7-25V.

MC78M15BTG

Onsemi

MC78M15BTG by Onsemi is a fixed positive single output standard regulator with 15V nominal output voltage and 0.5A max output current. It operates in temperatures ranging from -40 to 125 °C and has a package style of flange mount. Ideal for applications requiring stable voltage regulation in electronic circuits.

MC7805BD2TR4G

Onsemi

MC7805BD2TR4G by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. Its small outline package with gull wing terminals and surface mount capability enhances ease of integration in electronic designs.

ADP7156ACPZ-3.3-R7

Analog Devices

ADP7156ACPZ-3.3-R7 by Analog Devices is a fixed positive single output standard regulator with an output voltage of 3.3V and max output current of 1.2A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable power supply in compact spaces due to its small outline package style.

LM7805CT/NOPB

National Semiconductor

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;

MC78L24ACP

Fairchild Semiconductor

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-92; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 40 V; Maximum Voltage Tolerance: 5 %;

LM309KSTEEL/NOPB

National Semiconductor

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Terminal Form: PIN/PEG; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; No. of Functions: 1;

MC7812CT-BP

Micro Commercial Components

MC7812CT-BP by Micro Commercial Components is a fixed positive single output standard regulator with 12V nominal output voltage and 1A max output current. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits. Package style is flange mount with through-hole terminals for easy installation.