Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

BDW93C

Manufacturer

Mospec Semiconductor
Manufacturer's Part Number

BDW93C
Description

NPN; Configuration: DARLINGTON; Surface Mount: NO; Maximum Power Dissipation (Abs): 80 W; Maximum Collector Current (IC): 12 A; Minimum DC Current Gain (hFE): 100;
Datasheet

Datasheet

Not In Stock

Popular Products

LL4148

General Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

FDC5614P

MSKSEMI SEMICONDUCTOR

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;

Details

NE555D

Texas Instruments

NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.

Details

BSS138

Philips Semiconductors

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;

Details

CRCW080510R0FKEA

Vishay Intertechnology

Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.

Details

OPA2227UA

Texas Instruments

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

Details

SMBJ18CA

Rectron

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Changzhou Starsea Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

OHN3140U

Optek Technology

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;

Details

2N7002

Siliconix

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;

Details

SMBJ18CA

Leshan Radio

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

ROHM

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BSS138DW-7-F

Diodes Incorporated

BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.

Details

LM317T

Tt Electronics Plc

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;

Details

2N2222A

Electronic Transistors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

AMS1117-3.3

Advanced Monolithic Systems

AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.

Details

BSS138BK,215

NXP Semiconductors

NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.

Details

C0603C104K5RACTU

KEMET Corporation

KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.

Details

LAN8720A-CP-TR

Microchip Technology

LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.

Details

2N7002

Formosa Microsemi

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;

Details

BDW93C Technical Details

TYPE	DESCRIPTION
Maximum Collector Current (IC):	12 A
Maximum Power Dissipation (Abs):	80 W
Configuration:	DARLINGTON
Maximum Operating Temperature:	150 Cel
Sub-Category:	Other Transistors
Polarity or Channel Type:	NPN
Surface Mount:	NO
Minimum DC Current Gain (hFE):	100

Category Top Products

2N3055H

Onsemi

The Onsemi 2N3055H is a NPN power BJT with max. collector-emitter voltage of 60V, max. collector current of 15A, and max. power dissipation of 115W. It is commonly used for switching applications due to its single configuration and silicon transistor element material.

TIP41C

Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Power Dissipation (Abs): 65 W; Maximum Collector Current (IC): 6 A;

JAN2N3055

Microsemi

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): 15 A; Transistor Application: SWITCHING; Minimum DC Current Gain (hFE): 20;

TIP31C

STMicroelectronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Power Dissipation (Abs): 30 W; Maximum Collector Current (IC): 3 A;

JANTX2N3055

New England Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): 15 A; Package Style (Meter): FLANGE MOUNT; JESD-30 Code: O-MBFM-P2;

TIP42A

Continental Device India

PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Power Dissipation (Abs): 65 W; Maximum Collector Current (IC): 6 A;

TIP3055

Bourns

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): 15 A; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Transistor Element Material: SILICON;

MJE3055T

New Jersey Semiconductor Products

NPN; Configuration: SINGLE; Nominal Transition Frequency (fT): 2 MHz; Maximum Collector Current (IC): 10 A; Maximum Collector-Emitter Voltage: 60 V; No. of Elements: 1;

TIP29C

General Transistor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Power Dissipation (Abs): 30 W; Maximum Collector Current (IC): 1 A;

2N2905A

Vpt Components

PNP; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 3 W; Maximum Collector Current (IC): .6 A; Maximum Turn Off Time (toff): 300 ns;

TIP31C

Solid State Devices

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Power Dissipation (Abs): 40 W; Maximum Collector Current (IC): 3 A;

TIP32C

Micro Commercial Components

Power Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Collector Current (IC): 3 A; Maximum Collector-Emitter Voltage: 100 V;

TIP117

Inchange Semiconductor

PNP; Configuration: DARLINGTON WITH BUILT-IN RESISTOR; Surface Mount: NO; Maximum Power Dissipation (Abs): 50 W; Maximum Collector Current (IC): 2 A; Maximum Collector-Emitter Voltage: 100 V;

TIP112

Diotec Semiconductor Ag

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 50 W; Maximum Collector Current (IC): 2 A; Maximum Power Dissipation Ambient: 2 W;

TIP112

Rectron

NPN; Configuration: DARLINGTON; Surface Mount: NO; Maximum Power Dissipation (Abs): 50 W; Maximum Collector Current (IC): 2 A; JESD-30 Code: R-PSFM-T3;

TIP142

Motorola

NPN; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Nominal Transition Frequency (fT): 4 MHz; Maximum Power Dissipation (Abs): 125 W; Maximum Collector Current (IC): 10 A;

MJD112T4G

Onsemi

MJD112T4G by Onsemi is a NPN BJT with Darlington configuration, ideal for switching applications. It has a max collector-emitter voltage of 100V, max collector current of 2A, and min DC current gain of 200. With a package style of small outline and surface mount capability, it operates up to 150°C making it suitable for various power applications.

D44H8

National Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 50 MHz; Maximum Power Dissipation (Abs): 50 W; Maximum Collector Current (IC): 8 A;

MJD117T4

STMicroelectronics

PNP; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): 50 W; Maximum Collector Current (IC): 2 A; Transistor Element Material: SILICON;

NJVMJD32CT4G

Onsemi

NJVMJD32CT4G by Onsemi is a PNP BJT with 100V VCEO, 3A IC, and 15W Ptot. Ideal for automotive applications due to AEC-Q101 compliance and -65 to 150°C operating range. Suitable for surface mount designs with Gull Wing terminals in a small outline package.