Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

USB2534I-1050AEN

Manufacturer

Microchip Technology
Manufacturer's Part Number

USB2534I-1050AEN
Description

BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
Datasheet

Datasheet

Not In Stock

Popular Products

SMBJ18CA

Dc Components

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

NE555/D

General Electric Solid State

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;

Details

1N4148

Hy Electronic

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SMBJ18CA

International Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;

Details

1N4148WS

Rochester Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358N

Texas Instruments

LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.

Details

2N7002

Central Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;

Details

SS14

Onsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MBRA340T3G

Onsemi

MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.

Details

LAN8720AI-CP-TR

Standard Microsystems

ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;

Details

LM358AN

Fairchild Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

LM317T

Analog Devices

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;

Details

1N4148WS

Sensitron Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Changzhou Starsea Electronics

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

ULN2003ADR

Texas Instruments

ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.

Details

LM317T/NOPB

Texas Instruments

LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.

Details

ISO1050DUBR

Texas Instruments

ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.

Details

SS495A-SP

Honeywell Sensing And Control

SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.

Details

MBRS1100T3G

Onsemi

MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.

Details

SS14

Hitano Enterprise

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

USB2534I-1050AEN Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	3 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	1.2 V
Maximum Seated Height:	1 mm
Surface Mount:	YES
Terminal Finish:	MATTE TIN
No. of Terminals:	36
Terminal Position:	QUAD
Package Style (Meter):	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
Screening Level:	TS 16949
Maximum Data Transfer Rate:	.0125 MBps
Technology:	CMOS
JESD-30 Code:	S-PQCC-N36
Maximum Clock Frequency:	24 MHz
Package Shape:	SQUARE
Terminal Form:	NO LEAD
Maximum Operating Temperature:	85 Cel
Package Code:	HVQCCN
Width:	6 mm
Peripheral IC Type:	BUS CONTROLLER, UNIVERSAL SERIAL BUS
Maximum Supply Voltage:	3.6 V
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
Package Equivalence Code:	LCC36,.24SQ,20
Length:	6 mm
Bus Compatibility:	I2C; SMBUS; UART; USB
Terminal Pitch:	.5 mm
Temperature Grade:	INDUSTRIAL

Category Top Products

USB2513B-AEZC

Microchip Technology

The Microchip USB2513B-AEZC is a CMOS bus controller with 36 terminals, operating at 24 MHz. It supports I2C, SMBUS, and USB buses with a supply voltage range of 3-3.6 V. Ideal for applications requiring high-speed data transfer in automotive and industrial environments due to its TS 16949 screening level and wide temperature range from 0-85°C.

USB7050/KDX

Microchip Technology

USB7050/KDX by Microchip Technology is a BUS CONTROLLER with 100 terminals in a SQUARE package. It operates at 0-70 °C, supporting data transfer rates up to 625 MBps. Ideal for I2C, SMBUS, SPI, and USB applications due to its low profile design and CMOS technology.

MCP2200-E/SS

Microchip Technology

MCP2200-E/SS by Microchip Technology is a BUS CONTROLLER with UART and USB compatibility. It operates at 3-5.5V, supports data transfer rates up to 1.5 MBps, and has a clock frequency of 12 MHz. Ideal for applications requiring small outline packages and low supply current of 15mA.

AM53C974AKCW

Advanced Micro Devices

AM53C974AKCW by Advanced Micro Devices is a Bus Controller with 32-bit Address Bus Width, 10 MBps Data Transfer Rate, and 33 MHz Clock Frequency. It is used in SCSI peripherals for PCI bus compatibility applications.

STUSB1600QTR

STMicroelectronics

STUSB1600QTR by STMicroelectronics is a 24-terminal bus controller with a supply voltage range of 3-5.5V, operating from -40 to 105°C. It supports I2C and USB buses, offering a data transfer rate of up to 0.05 MBps. Ideal for industrial applications requiring low-profile square package design with no lead terminals.

TUSB2036VF

Texas Instruments

TUSB2036VF by Texas Instruments is a 32-terminal bus controller with 3.3V power supply, operating at up to 48MHz clock frequency. It is a CMOS technology-based USB peripheral IC suitable for various applications requiring low-profile flatpack packaging and quad terminal position.

FT231XQ-T

FTDI

FT231XQ-T by FTDI is a bus controller with 3.3/5V supplies, 12.02 MHz clock frequency, and UART/USB compatibility. Ideal for applications requiring a compact chip carrier package with quad terminals and CMOS technology, operating b/w -40 to 85°C temperature range.

MAX3421EEHJ+

Maxim Integrated

BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TFQFP; Package Shape: SQUARE;

BD82QM67/SLH9B

Intel

Intel's BD82QM67/SLH9B is a Bus Controller with 989 terminals in GRID ARRAY package. It operates at power supplies of 1.05V, 1.5V, 1.8V, 3.3V, and 5V with PLASTIC/EPOXY body material for surface mount applications.

PI7C9X2G606PRDNJAEX

Diodes Incorporated

Diodes Inc. PI7C9X2G606PRDNJAEX is a 196-terminal bus controller IC with CMOS technology, operating b/w -40°C to 85°C. Its low-profile grid array package makes it suitable for industrial applications requiring PCI peripheral control in compact spaces.

USB2640I-HZH-02-TR

Microchip Technology

Microchip USB2640I-HZH-02-TR is a 48-terminal bus controller with 3.3V power supply, supporting I2C, SMBUS, SPI, and USB buses. It operates b/w -40 to 85 °C with a clock frequency of 24 MHz and data transfer rate up to 35 MBps. Ideal for industrial applications requiring high-speed data communication in compact designs.

CYUSB3304-68LTXC

Cypress Semiconductor

BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 68; Package Code: HVQCCN; Package Shape: SQUARE;

PCA9540BD

Philips Semiconductors

Bus Controllers; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

ISP1507BBS

STMicroelectronics

Bus Controllers; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: QCCN; Package Shape: SQUARE;

PEX8606-BA50BCG

Broadcom

Broadcom's PEX8606-BA50BCG is a bus controller with 196 terminals, operating at 0-70°C. It supports I2C, SMBUS, SPI, USB buses and has a supply current of 2030mA. Ideal for PCI applications due to its CMOS technology and IEEE drive interface standards.

PEX8604-BA50BC

Broadcom

Broadcom's PEX8604-BA50BC is a PCI bus controller with 196 terminals in a square grid array package. It utilizes CMOS technology and supports I2C bus compatibility. Ideal for applications requiring high-performance data transfer and connectivity solutions.

USB2513B-AEZG

Microchip Technology

Microchip Technology's USB2513B-AEZG is a 36-terminal bus controller with a max clock frequency of 24 MHz. It operates b/w 0-70°C, compatible with I2C, SMBUS, and USB buses. This CMOS technology chip has a nominal voltage of 3.3V and is ideal for various commercial applications requiring high-speed data transfer.

PCA9541AD/03,118

NXP Semiconductors

PCA9541AD/03,118 by NXP Semiconductors is a bus controller with 16 terminals and a rectangular package shape. It operates at a supply voltage range of 2.3V to 5.5V and has an industrial temperature grade of -40°C to 85°C. This IC is commonly used for I2C communication in various applications.

USB5734T/MR

Microchip Technology

USB5734T/MR by Microchip Technology is a BUS CONTROLLER with 64 terminals, operating at 1.08-1.32 V. It supports I2C, SMBUS, SPI, UART, USB buses and has a data transfer rate of 625 MBps. Ideal for applications requiring high-speed data transfer in commercial-grade environments at temperatures ranging from 0 to 70 °C.

FT232RQ-R

FTDI

FTDI's FT232RQ-R is a USB bus controller with 32 terminals, operating at 3.3-5.25 V. It supports RS232/RS422/RS485 interfaces and has a clock frequency of 12.02 MHz. Ideal for applications requiring low power consumption and compact design in industrial environments.