Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

MTCH1010-V/SN

Manufacturer

Microchip Technology
Manufacturer's Part Number

MTCH1010-V/SN
Description

CAPACITIVE TOUCH SENSOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Output Type: DIGITAL OUTPUT; Package Shape or Style: RECTANGULAR; Output Range: 0.60-2.40;
Datasheet

Datasheet

Not In Stock

Popular Products

BAV99

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WT

Bytesonic Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138NH6327XTSA2

Infineon Technologies

BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.

Details

2N2222A

New Jersey Semiconductor Products

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;

Details

SN65HVD230DR

Texas Instruments

SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.

Details

OPA2277UA

Texas Instruments

OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.

Details

RC0603FR-071KL

Yageo

Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.

Details

EPCS4SI8N

Intel

EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.

Details

1N4148WT

Changzhou Galaxy Century Microelectronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM2931Z-5.0G

Onsemi

LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.

Details

1N4148

Rectron

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148

General Diode

RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;

Details

2N2222A

Allegro MicroSystems

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

SS14+

Multicomp Pro

SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.

Details

1N4148WS

Promax-johnton

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LD1117S33TR

STMicroelectronics

LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.

Details

BAV99

Surge Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAT54SLT1G

Onsemi

BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.

Details

2N7002

North American Philips Discrete Products Div

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;

Details

RC0402FR-071KL

Yageo

The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.

Details

MTCH1010-V/SN Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	2 V
Other Names:	150-MTCH1010-V/SN
Package Body Material:	PLASTIC/EPOXY
Maximum Supply Voltage:	5.5 V
Output Range:	0.60-2.40
Output Type:	DIGITAL OUTPUT
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	SURFACE MOUNT
Body Width:	3.9 inch
Sensors or Transducers Type:	CAPACITIVE TOUCH SENSOR
No. of Terminals:	8
Package Equivalence Code:	SOP8,.25
Package Shape or Style:	RECTANGULAR
Technology:	MOC
Output (V):	OPEN-DRAIN
Body Height:	1.25 mm
Additional Features:	SEATED HGT MIN
Body Length/Diameter:	4.9 mm
Maximum Operating Temperature:	105 Cel

Category Top Products

SNDH-H3P-G01

Honeywell Sensing And Control

SPEED SENSOR; Housing: PLASTIC; Termination Type: CONNECTOR; Maximum Output Current: 20 A; Maximum Operating Current: 14 mA;

D6F-50A6-000

Omron

Other Sensors/Transducers;

LKSR6-NP

Lem International Sa

CURRENT SENSOR;

OB1203SD-C4R

Renesas Electronics

OB1203SD-C4R by Renesas Electronics is a SENSOR MODULE with 14 terminals, operating b/w -40°C to 85°C. It has a supply voltage range of 1.7V to 3.6V and outputs digital current in open-drain format. This rectangular package sensor is ideal for surface mount applications due to its compact dimensions of 2" x 4.2mm x 1.33mm.

HPMA115C0-003

Honeywell Sensing And Control

HPMA115C0-003 by Honeywell Sensing And Control is a dust sensor with 10 terminals. It operates b/w -20°C to 70°C, powered by 4.8V to 5.2V supply voltage. Measuring 44mm x 36 inch x 12mm, it's ideal for air quality monitoring in various applications.

ACS722LLCTR-10AB-T

Allegro MicroSystems

CURRENT SENSOR;

TMCS1108A2UQDRQ1

Texas Instruments

TMCS1108A2UQDRQ1 by Texas Instruments is a current sensor with 8 terminals, operating voltage range of 3-5V, and AEC-Q100 screening. It measures currents and provides analog voltage output, suitable for automotive applications due to its high temperature range of -40 to 125°C and surface mounting feature.

TMCS1107A1UQDR

Texas Instruments

TMCS1107A1UQDR by Texas Instruments is a current sensor with 8 terminals. It operates b/w -40°C to 85°C, producing analog voltage output. With a supply voltage range of 3V to 5.5V, it is ideal for surface mount applications in various industries.

ACS710KLATR-25CB-T

Allegro MicroSystems

ACS710KLATR-25CB-T by Allegro MicroSystems is a current sensor with 16 terminals. It operates b/w -40°C to 125°C, providing analog voltage output. With a package size of 10.21mm x 7.5in x 2.34mm, it's ideal for surface mount applications in various industries like automotive and industrial automation.

SHT35-DIS-B2.5KS

Sensirion Ag

Sensirion Ag's SHT35-DIS-B2.5KS is a humidity and temperature sensor with digital output. It operates b/w -40 to 125°C, suitable for various applications. With a compact size of 2.5mm x 2.5mm x 0.9mm, it features an open-drain output and CMOS technology for precise measurements in tight spaces.

LM75CIM-5/NOPB

Texas Instruments

Texas Instruments' LM75CIM-5/NOPB is an 8-terminal sensor with a 5V power supply, operating b/w -55°C to 125°C. It features a max current of 1mA and matte tin terminal finish. Ideal for surface mount applications in various industries requiring precise temperature monitoring.

SHT40I-AD1B-R2

Sensirion Ag

HUMIDITY AND TEMPERATURE SENSOR;

ACS71240KEXBLT-030B5

Allegro MicroSystems

ACS71240KEXBLT-030B5 by Allegro MicroSystems is a current sensor with voltage output. It operates b/w -40 to 125°C, with supply voltage range of 4.5V to 5.5V. This AEC-Q100 compliant sensor is ideal for automotive applications due to its surface mount feature and 12 terminals.

IVT-S-500-U0-I-CAN2-12/24

Isabellenhuette Heusler & Kg

CURRENT SENSOR;

AD590LF

General Electric Solid State

Other Sensors/Transducers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Package Body Material: CERAMIC; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0;

HTFS400-P

Lem International Sa

CURRENT SENSOR;

AS7331-AQFM

Ams Ag

AMBIENT LIGHT SENSOR;

ACS780LLRTR-050B-T

Allegro MicroSystems

Allegro MicroSystems' ACS780LLRTR-050B-T is a current sensor with 7 terminals, operating voltage range of 4.5V to 5.5V, and outputting analog voltage. Ideal for automotive applications due to AEC-Q100 screening, it operates b/w -40°C to 150°C in a surface-mount package measuring 6.4mm x 4.8mm x 1.5mm.

TMCS1100A3QDT

Texas Instruments

TMCS1100A3QDT by Texas Instruments is a current sensor with 8 terminals, operating voltage range of 3-5.5V, and outputting analog voltage. It has a compact rectangular shape ideal for surface mount applications in temperature-sensitive environments from -40 to 125°C.

ACS770LCB-100U-PFF-T

Allegro MicroSystems

ACS770LCB-100U-PFF-T by Allegro MicroSystems is a current sensor with 5V power supply, 4.5-5.5V voltage range, and -40 to 150°C operating temperature. Ideal for AEC-Q100 applications due to its BICMOS technology, through-hole mounting feature, and single-ended analog voltage output circuit type.