Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

MIC5233-3.3YM5-TR

Manufacturer

Microchip Technology
Manufacturer's Part Number

MIC5233-3.3YM5-TR
Description

FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 38 V; Maximum Voltage Tolerance: 2 %;
Datasheet

Datasheet

Not In Stock

Popular Products

SN65HVD234DR

Texas Instruments

SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.

Details

BAV99

Secos

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM317TG

Onsemi

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;

Details

FDLL4148

Fairchild Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

SS14

SPC TECHNOLOGY/ MULTICOMP

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WS

Sangdest Microelectronics (Nanjing)

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LFXTAL025159REEL

Iqd Frequency Products

LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.

Details

SMBJ18CA

Weitron Technology

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Taiwan Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Good-ark Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;

Details

1N4148

Frontier Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LL4148

General Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LL4148

Taiwan Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

SMBJ18CA

Eic Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

SPC TECHNOLOGY/ MULTICOMP

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BSS138

Weitron Technology

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;

Details

MMBF170LT1G

Onsemi

MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.

Details

BAV99

Infineon Technologies

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002

Dc Components

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;

Details

BAV99

NXP Semiconductors

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MIC5233-3.3YM5-TR Technical Details

TYPE	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Maximum Line Regulation:	.0165 %
Maximum Seated Height:	1.45 mm
Surface Mount:	YES
Regulator Type:	FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR
Terminal Finish:	NICKEL PALLADIUM GOLD
No. of Outputs:	1
Maximum Output Current-1:	.1 A
No. of Terminals:	5
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH
Maximum Load Regulation:	.033 %
JESD-30 Code:	R-PDSO-G5
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Nominal Output Voltage-1:	3.3 V
Operating Temperature (TJ-Max):	125 Cel
Package Code:	LSSOP
Width:	1.6 mm
Maximum Dropout Voltage-1:	.45 V
Maximum Input Voltage Absolute:	38 V
Moisture Sensitivity Level (MSL):	1
Minimum Input Voltage:	4.3 V
Maximum Output Voltage-1:	3.366 V
Maximum Input Voltage:	36 V
Packing Method:	TR
Minimum Output Voltage-1:	3.234 V
JESD-609 Code:	e4
Maximum Voltage Tolerance:	2 %
No. of Functions:	1
Package Equivalence Code:	TSOP5/6,.11,37
Nominal Dropout Voltage-1:	.27 V
Operating Temperature (TJ-Min):	-40 Cel
Length:	2.9 mm
Adjustability:	FIXED
Peak Reflow Temperature (C):	260
Terminal Pitch:	.95 mm

Category Top Products

LT1764AEQ-3.3#TRPBF

Linear Technology

FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 3.54 %;

LP2985IM5-1.8/NOPB

National Semiconductor

FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 16 V; Maximum Voltage Tolerance: 4 %;

ADM7172ACPZ-1.8-R7

Analog Devices

ADM7172ACPZ-1.8-R7 by Analog Devices is a CMOS LDO regulator with fixed 1.8V output voltage and 2A max current. Operating from -40 to 125°C, it's ideal for applications requiring stable power supply in compact spaces due to its small form factor and surface-mount capability.

LT3010EMS8E-5

Analog Devices

Analog Devices' LT3010EMS8E-5 is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.55V. This surface-mount device in a small outline package is ideal for applications requiring stable voltage regulation in tight spaces, such as portable electronics or IoT devices.

LP2980IM5-3.0/NOPB

Texas Instruments

LP2980IM5-3.0/NOPB by Texas Instruments is a fixed positive single output LDO regulator with 3V nominal output voltage, 0.05A max output current, and 125°C max operating temperature. Ideal for applications requiring low dropout voltage and precise voltage regulation in compact designs.

LM2931AMX-5.0/NOPB

Texas Instruments

LM2931AMX-5.0/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.

LT1963AEQ-1.5#PBF

Linear Technology

FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 3.5 %;

NCP114ASN330T1G

Onsemi

NCP114ASN330T1G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.3A. It operates in temperatures ranging from -40 to 85°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline, thin profile, with surface mount capability for easy integration into electronic devices.

LM2931AD-5.0R2G

Onsemi

LM2931AD-5.0R2G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It is ideal for applications requiring low dropout voltage and precise voltage regulation in compact designs.

MCP1702T-5002E/MBVAO

Microchip Technology

MCP1702T-5002E/MBVAO by Microchip is a fixed positive single output LDO regulator with 5V nominal output voltage and 0.25A max output current. It operates in temperatures ranging from -40 to 125°C, making it suitable for automotive applications requiring stable voltage regulation in compact spaces.

LM1117MP-5.0/NOPB

National Semiconductor

FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2 %;

LT1117IST-3.3#PBF

Linear Technology

FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 15 V; Maximum Voltage Tolerance: 1 %;

LP2951-50DRG4

Texas Instruments

LP2951-50DRG4 by Texas Instruments is a fixed positive single output LDO regulator with 5V nominal output voltage and 0.1A max output current. It has a small outline package style, operates b/w -40 to 125°C, and offers low dropout voltage of 0.38V for efficient power management in various electronic applications.

NCV1117ST18T3G

Onsemi

NCV1117ST18T3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 1A and a dropout voltage of 1.07V. It operates in temperatures ranging from -55 to 150°C, making it suitable for automotive applications requiring stable voltage regulation in compact spaces.

LP3981ILD-3.3/NOPB

National Semiconductor

FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 6.5 V; Maximum Voltage Tolerance: 3 %;

MIC5233-5.0YM5-TR

Micrel

FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2 %; Operating Temperature (TJ-Min): -40 Cel;

MC33275DT-3.3G

Onsemi

MC33275DT-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.3A and a dropout voltage of 0.5V. It is commonly used in applications requiring stable voltage regulation, such as power supplies and battery-powered devices.

MIC37100-3.3WS-TR

Micrel

FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2 %; Maximum Time At Peak Reflow Temperature (s): 40;

LM2936HVMA-5.0

National Semiconductor

FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 60 V; Maximum Voltage Tolerance: 3 %;

TPS71733DCKTG4

Texas Instruments

TPS71733DCKTG4 by Texas Instruments is a BICMOS technology LDO regulator with 3.3V output voltage, 0.15A max current, and 0.3V dropout voltage. Ideal for applications requiring stable power supply in compact spaces due to its small outline package style and surface mount capability.