Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

MIC2981/82YN

Manufacturer

Microchip Technology
Manufacturer's Part Number

MIC2981/82YN
Description

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

Not In Stock

Popular Products

1N4148

Kec

RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;

Details

SMBJ18CA

Sensitron Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Asi Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

1N4148

Weitron Technology

RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);

Details

SMBJ18CA

Jgd Semiconductors

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;

Details

1N4148WS

Daco Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ULN2803A

Motorola

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;

Details

SMBJ18CA

Dc Components

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM107H/883C

General Electric Solid State

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;

Details

M39029/58-360

Amphenol

CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;

Details

LL4148

Taitron Components

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

M24308/2-1F

Bel Fuse

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;

Details

BSS84-7-F

Diodes Incorporated

Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.

Details

LL4148

Yangzhou Yangjie Electronics

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LM78L05ACMX/NOPB

National Semiconductor

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;

Details

1N4148

Capar Components

RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;

Details

LL4148

International Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

1N4148WS-7-F

Diodes Incorporated

1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.

Details

MBR0540T1G

Onsemi

MBR0540T1G by Onsemi is a Schottky rectifier diode with max. forward voltage of 0.62V and max. output current of 0.5A, ideal for applications requiring high efficiency power conversion in small outline packages. Operating temp range: -55 to 150°C, with peak reflow temp at 260°C, making it suitable for various electronic devices needing reliable rectification performance in compact designs.

Details

BSS84-7-F

SPC TECHNOLOGY/ MULTICOMP

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;

Details

MIC2981/82YN Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	5 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	35 V
Maximum Seated Height:	3.937 mm
Surface Mount:	NO
Maximum Supply Current:	10 mA
Terminal Finish:	MATTE TIN
No. of Terminals:	18
Terminal Position:	DUAL
Package Style (Meter):	IN-LINE
JESD-30 Code:	R-PDIP-T18
Package Shape:	RECTANGULAR
Terminal Form:	THROUGH-HOLE
Built-in Protections:	TRANSIENT
Maximum Operating Temperature:	85 Cel
Package Code:	DIP
Interface IC Type:	BUFFER OR INVERTER BASED PERIPHERAL DRIVER
Width:	7.62 mm
Turn-off Time:	10 us
Output Polarity:	TRUE
Input Characteristics:	STANDARD
Driver No. of Bits:	8
Maximum Supply Voltage:	50 V
Turn-on Time:	2 us
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
No. of Functions:	8
Package Equivalence Code:	DIP18,.3
Output Current Flow Direction:	SOURCE
Length:	23.37 mm
Additional Features:	LG-MAX
Terminal Pitch:	2.54 mm
Temperature Grade:	INDUSTRIAL

Category Top Products

SI9986CY-T1-E3

Vishay Intertechnology

SI9986CY-T1-E3 by Vishay Intertechnology is a half bridge peripheral driver with 4.5V nominal voltage, operating b/w 0-70°C. It supports source and sink output current flow direction, ideal for commercial applications requiring a compact design with a terminal pitch of 1.27mm.

IRS2184SPBF

Infineon Technologies

IRS2184SPBF by Infineon Technologies is a peripheral driver with 8 terminals, operating voltage range of 10-20V. It offers built-in transient and under voltage protections, suitable for automotive applications due to its CMOS technology and small outline package style. With turn-on time of 0.9us and turn-off time of 0.4us, it provides source and sink output current flow direction.

BTS6133DAUMA1

Infineon Technologies

BTS6133DAUMA1 by Infineon Technologies is a peripheral driver with a max supply voltage of 38V. It offers built-in protections for transient, over current, over voltage, thermal, and under voltage conditions. This small outline package is commonly used as a buffer or inverter based peripheral driver in various applications.

E-TDE1707BFP

STMicroelectronics

E-TDE1707BFP by STMicroelectronics is a Peripheral Driver with 8 terminals, operating voltage range of 6-48V, and built-in protections against transient, over current, and thermal issues. It is a small outline package suitable for commercial extended temperature applications requiring buffer or inverter based peripheral drivers with source and sink output current flow direction.

VNI4140KTR-32

STMicroelectronics

VNI4140KTR-32 by STMicroelectronics is a 24V peripheral driver with 4 bits, suitable for BUFFER OR INVERTER BASED applications. It features a small outline package with dual terminals and matte tin finish. The device has a peak reflow temperature of 260°C and moisture sensitivity level of MSL3.

FPF2701MPX

Onsemi

FPF2701MPX by Onsemi is a peripheral driver with a max supply voltage of 36V and built-in protections for over current, thermal, and under voltage. It has 8 terminals in a small outline package style suitable for industrial applications requiring a nominal output peak current limit of 0.4A.

AUIPS7081RTRL

Infineon Technologies

AUIPS7081RTRL by Infineon Technologies is a peripheral driver with 35V max supply voltage, 2.3A max output current, and AEC-Q100 screening level. It offers built-in protections for transient, over current, and thermal issues. Ideal for automotive applications requiring reliable power supplies in a compact package style.

BSP75NTA

Zetex Plc

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Code: SOP; Package Shape: RECTANGULAR; Turn-off Time: 20 us;

MIC5841YN

Microchip Technology

MIC5841YN by Microchip Technology is an 8-bit SIPO-based peripheral driver with inverted output polarity. It operates at a nominal voltage of 5V and has a max supply current of 16mA. Ideal for industrial applications, it offers built-in transient protections and sink output current flow direction.

VN5E160STR-E

STMicroelectronics

STMicroelectronics' VN5E160STR-E is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates within a supply voltage range of 4.5V to 28V and has a compact rectangular package style suitable for various applications requiring source output current flow direction.

BV1HD090FJ-CE2

ROHM

BV1HD090FJ-CE2 by ROHM is a Peripheral Driver with 8 terminals, AEC-Q100 screening. It has a supply voltage range of 4.5V to 36V and built-in protections for transient, over current, thermal, and under voltage. This small outline driver is ideal for automotive applications requiring buffer or inverter-based interface ICs.

VNH5019TR-E

STMicroelectronics

VNH5019TR-E by STMicroelectronics is a full bridge peripheral driver with 30 terminals. It offers built-in protections for transient, over voltage, thermal, and under voltage. With a max supply voltage of 24V and nominal output peak current limit of 50A, it is ideal for applications requiring source and sink output current flow direction.

FPF2123

Onsemi

FPF2123 by Onsemi is a peripheral driver with 5.5V max supply voltage, 0.8A output peak current limit, and built-in protections. It is used in industrial applications requiring a compact form factor and operates b/w -40 to 85°C.

BTS5210GNT

Infineon Technologies

BTS5210GNT by Infineon Technologies is a peripheral driver with 2 functions, operating at 5.5-40V. It offers built-in protections against transient, over current, and over voltage. Ideal for applications requiring a small outline package style and nominal output peak current limit of 8.5A.

VN820-B5TR-E

STMicroelectronics

STMicroelectronics' VN820-B5TR-E is a MOS technology-based peripheral driver with 1 function, capable of handling up to 9A output current. It offers built-in protections against transient, over current, over voltage, thermal, and under voltage conditions. Ideal for applications requiring a source flow direction and a supply voltage range of 8-36V in compact designs.

PTPS1H200AQDGNRQ1

Texas Instruments

PTPS1H200AQDGNRQ1 by Texas Instruments is a Peripheral Driver with 8 terminals, operating voltage range of 4-40V, and built-in protections against transient, over current, and thermal issues. It is designed for automotive applications with a small outline package style and AEC-Q100 screening level.

TPIC6B595DWG4

Texas Instruments

TPIC6B595DWG4 by Texas Instruments is a register-based peripheral driver with 8 bits. It has a max supply voltage of 5.5V and can handle a max output current of 0.15A. Ideal for automotive applications due to its built-in transient protections and small outline package style.

VNQ5050K-E

STMicroelectronics

STMicroelectronics VNQ5050K-E is a 4-function peripheral driver with max supply voltage of 36V. It offers built-in protections for transient, over current, and over voltage. Ideal for applications requiring a compact design and high output current up to 2A.

LMG1210RVRT

Texas Instruments

LMG1210RVRT by Texas Instruments is a peripheral driver with 2 channels, capable of handling a max output current of 3A. It operates in automotive-grade temperatures (-40 to 125°C) and features built-in thermal and under voltage protections. This chip carrier package with very thin profile is suitable for applications requiring fast turn-on/off times and source/sink current flow control.

TPIC6B595DW

Texas Instruments

TPIC6B595DW by Texas Instruments is an 8-bit register-based peripheral driver with sink output current flow direction. It operates b/w -40 to 125 °C and has a max supply voltage of 5.5 V, making it suitable for automotive applications requiring transient protection and standard input characteristics.