Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

MCP2210-I/MQ

Manufacturer

Microchip Technology
Manufacturer's Part Number

MCP2210-I/MQ
Description

BUS CONTROLLER, UNIVERSAL SERIAL BUS; Terminal Form: NO LEAD; No. of Terminals: 20; Package Code: HVQCCN; Package Shape: SQUARE; Minimum Operating Temperature: -40 Cel;
Datasheet

Datasheet

Not In Stock

Popular Products

BSS138-7-F

Diodes Incorporated

Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.

Details

1N4148WS

Rugao Dachang Electronic

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Forward International Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;

Details

LL4148

Leshan Radio

RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;

Details

1N4148

Onsemi

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BAV99

General Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

CRG0805F10R

TE Connectivity

TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.

Details

BAV99-7-F

Multicomp Pro

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

DS18B20Z+T&R

Analog Devices

DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.

Details

M39029/56351

Souriau

CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;

Details

1N4148WS

Multicomp Pro

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148W-7-F

Diodes Incorporated

1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.

Details

1N4148WS

Promax-johnton

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M39029/58-360

TE Connectivity

TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.

Details

CL31B104KBCNNNC

Samsung Electro-mechanics

Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.

Details

LL4148

SPC TECHNOLOGY/ MULTICOMP

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BAV99

Toshiba

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM2931AZ-5.0RPG

Onsemi

LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.

Details

LL4148

Itt Components

RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;

Details

LM317T/NOPB

Texas Instruments

LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.

Details

MCP2210-I/MQ Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	3.3 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	5 V
Maximum Time At Peak Reflow Temperature (s):	40
Maximum Seated Height:	1 mm
Surface Mount:	YES
Maximum Supply Current:	15 mA
Terminal Finish:	MATTE TIN
No. of Terminals:	20
Terminal Position:	QUAD
Package Style (Meter):	CHIP CARRIER, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH
Address Bus Width:	0
Maximum Data Transfer Rate:	1.5 MBps
Technology:	CMOS
JESD-30 Code:	S-PQCC-N20
Maximum Clock Frequency:	12 MHz
Package Shape:	SQUARE
Terminal Form:	NO LEAD
Maximum Operating Temperature:	85 Cel
Package Code:	HVQCCN
Width:	5 mm
Moisture Sensitivity Level (MSL):	1
Other Names:	MCP2210IMQ
Peripheral IC Type:	BUS CONTROLLER, UNIVERSAL SERIAL BUS
Maximum Supply Voltage:	5.5 V
External Data Bus Width:	0
Minimum Operating Temperature:	-40 Cel
Length:	5 mm
Peak Reflow Temperature (C):	260
Bus Compatibility:	SPI, USB
Terminal Pitch:	.65 mm

Category Top Products

PEX8619-BA50BIG

Broadcom

Broadcom's PEX8619-BA50BIG is a bus controller with 324 terminals, operating at -40 to 85°C. It supports I2C, PCI, SMBUS, SPI, and USB buses. The CMOS technology chip has a voltage range of 0.95V to 1.05V and uses a grid array package style for industrial applications.

USB2513B-I/M2

Microchip Technology

The Microchip Technology USB2513B-I/M2 is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of 24MHz, industrial temperature grade (-40 to 85 °C), and low supply current of 70mA. Ideal for applications requiring high-speed data transfer over USB interfaces in compact designs.

USB2513B-AEZC

Microchip Technology

The Microchip USB2513B-AEZC is a CMOS bus controller with 36 terminals, operating at 24 MHz. It supports I2C, SMBUS, and USB buses with a supply voltage range of 3-3.6 V. Ideal for applications requiring high-speed data transfer in automotive and industrial environments due to its TS 16949 screening level and wide temperature range from 0-85°C.

PM8534B-FEI

Microchip Technology

Microchip Technology's PM8534B-FEI is a bus controller IC with 1311 terminals, operating b/w -40 to 105°C. It supports data transfer rates up to 174 Gbps and interfaces with I2C, PCI, SMBUS, and UART buses. Ideal for applications requiring high-speed data processing in various electronic systems.

FT232BQ

FTDI

FTDI's FT232BQ is a 32-terminal bus controller with a max supply voltage of 5.25V and clock frequency of 6MHz. Ideal for USB peripheral IC applications, it operates b/w 0-70°C with a compact square package style suitable for surface mount technology.

LAN7800T/VSX

Microchip Technology

Microchip Technology's LAN7800T/VSX is a USB bus controller with 625 MBps data transfer rate, suitable for IEEE 802.3 and IEEE 802.1 standards. Operating at 0-70 °C, it has a supply voltage range of 1.1-1.26 V and supports surface mount installation in commercial-grade applications.

CY7C68013A-100AXI

Infineon Technologies

Infineon Technologies' CY7C68013A-100AXI is a bus controller with a max clock frequency of 48 MHz and a max data transfer rate of 60 MBps. It is commonly used in applications requiring I2C, UART, and USB bus compatibility.

USB3346-CP-TR

Microchip Technology

Microchip Technology's USB3346-CP-TR is a CMOS bus controller with 8-bit external data bus width, operating at up to 60 MHz. It supports USB and VBUS compatibility, with a max supply voltage of 2V and package style in chip carrier form. Ideal for applications requiring high-speed USB communication in automotive or industrial environments.

PEX8734-AB80BIG

Broadcom

PEX8734-AB80BIG by Broadcom is a bus controller with 676 terminals, packaged in plastic/epoxy. It supports I2C bus compatibility and operates on CMOS technology. This device is commonly used for PCI applications.

ISP1581BD,557

St-ericsson

BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: LFQFP; Package Shape: SQUARE;

USB3300-EZK-TR

Microchip Technology

The Microchip Technology USB3300-EZK-TR is a Bus Controller with 32 terminals, operating at 3.3V nominal voltage and supporting USB bus compatibility. It has a max clock frequency of 24MHz, operates b/w -40 to 85°C, and features a compact square package suitable for various applications requiring high-speed USB connectivity.

FT2232D-REEL

FTDI

FTDI's FT2232D-REEL is a bus controller with 48 terminals, operating at -40 to 85°C. It supports USB and I2C buses, with a max data rate of 1 MBps. Ideal for industrial applications requiring low profile, fine pitch packages.

BD82H61/SLJ4B

Intel

Intel's BD82H61/SLJ4B is a Bus Controller with 942 terminals in GRID ARRAY package. It supports power supplies of 1.05V, 1.5V, 1.8V, 3.3V, and 5V for various applications requiring surface mount technology and plastic/epoxy material in the package body.

FT232RL-R

FTDI

FTDI's FT232RL-R is a USB bus controller with 28 terminals, operating at 3.3-5.25V, clocking up to 48MHz. Ideal for industrial applications, it features a compact rectangular package and dual terminal position, suitable for surface mount assembly. With CMOS technology and matte tin finish, it ensures reliable data transfer in various electronic devices.

PCA9564D

NXP Semiconductors

PCA9564D by NXP Semiconductors is a Bus Controller with 20 terminals, operating voltage range of 2.3V to 3.6V, and I2C technology. It has an address bus width of 2, external data bus width of 8, and supports various bus compatibilities like 8049, 8051, Z80. Ideal for industrial applications requiring reliable bus control in compact spaces.

XR21V1410IL16-F

Exar

Exar's XR21V1410IL16-F is a 16-terminal bus controller IC with 3.3V supply, compatible with I2C buses. Operating temperature ranges from -40 to 85°C, making it suitable for industrial applications requiring compact (3x3mm) chip carrier packaging. The CMOS technology and quad terminal position enhance its performance in various electronic systems.

FT312D-32L1C-R

FTDI

FT312D-32L1C-R by FTDI is a 32-terminal bus controller with 3.3V power supply, operating at -40 to 125 °C. Ideal for automotive applications, it supports up to 12 MHz clock frequency and features a low-profile flatpack design in plastic/epoxy material.

TUSB9261IPAPQ1

Texas Instruments

TUSB9261IPAPQ1 by Texas Instruments is a BUS CONTROLLER IC with 64 terminals, operating at -40 to 85 °C. It supports ATA bus compatibility and offers data transfer rate up to 375 MBps. Ideal for industrial applications requiring USB connectivity with IEEE standards compliance.

TUSB2077APTRG4

Texas Instruments

TUSB2077APTRG4 by Texas Instruments is a 48-terminal bus controller with 3.3V power supply, supporting USB data transfer rates up to 12 MBps. Ideal for commercial applications, it operates b/w 0-70°C and has a max clock frequency of 48 MHz.

CY7C65642-48AXC

Infineon Technologies

CY7C65642-48AXC by Infineon: 3.6V max supply, 12MHz clock freq, I2C bus compatibility. Ideal for commercial applications as a BUS CONTROLLER with 48 terminals in a low profile package style.