Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

KSZ9131RNXI-TR

Manufacturer

Microchip Technology
Manufacturer's Part Number

KSZ9131RNXI-TR
Description

ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
Datasheet

Datasheet

Not In Stock

Popular Products

LM317T

Motorola

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;

Details

MBRA340T3G

Onsemi

MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.

Details

BSS138

Siemens

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);

Details

EPCS4SI8N

Intel

EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.

Details

BSS138

Yangzhou Yangjie Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;

Details

M24308/2-1F

Air Electro

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;

Details

BAV99

Daco Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

OPA2277UA/2K5E4

Texas Instruments

OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.

Details

B340A-13-F

SPC TECHNOLOGY/ MULTICOMP

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002

Continental Device India

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;

Details

2N7002

Comchip Technology

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;

Details

2N2222A

Electronic Transistors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

BAV99

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Mde Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

IRLML6402TRPBF

Infineon Technologies

IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.

Details

BSS84PH6327XTSA2

Infineon Technologies

BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.

Details

FDD5614P

Fairchild Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;

Details

DS18B20Z

Dallas Semiconductor

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;

Details

1N4148

Hy Electronic

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

MBR0540T1G

Onsemi

MBR0540T1G by Onsemi is a Schottky rectifier diode with max. forward voltage of 0.62V and max. output current of 0.5A, ideal for applications requiring high efficiency power conversion in small outline packages. Operating temp range: -55 to 150°C, with peak reflow temp at 260°C, making it suitable for various electronic devices needing reliable rectification performance in compact designs.

Details

KSZ9131RNXI-TR Technical Details

TYPE	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	1.2 V
Maximum Time At Peak Reflow Temperature (s):	30
Maximum Seated Height:	1 mm
Surface Mount:	YES
Terminal Finish:	MATTE TIN
No. of Terminals:	48
No. of Transceivers:	1
Terminal Position:	QUAD
Package Style (Meter):	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
Data Rate:	1000 Mbps
Screening Level:	TS 16949
JESD-30 Code:	S-PQCC-N48
Package Shape:	SQUARE
Terminal Form:	NO LEAD
Maximum Operating Temperature:	85 Cel
Package Code:	HVQCCN
Width:	7 mm
Moisture Sensitivity Level (MSL):	3
Telecom IC Type:	ETHERNET TRANSCEIVER
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Package Equivalence Code:	LCC48,.28SQ,20
Length:	7 mm
Peak Reflow Temperature (C):	260
Terminal Pitch:	.5 mm
Temperature Grade:	INDUSTRIAL

Category Top Products

MAX14882AWE+T

Analog Devices

INTERFACE CIRCUIT; Terminal Finish: Matte Tin (Sn) - annealed; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30;

TCAN4550RGYRQ1

Texas Instruments

TCAN4550RGYRQ1 by Texas Instruments is an automotive-grade interface circuit with 8 Mbps data rate. It operates b/w -40 to 125 °C and has a supply voltage of 12 V. This chip carrier package with matte tin terminals is ideal for network interfaces in automotive applications.

MCP2551-I/SNVAO

Microchip Technology

MCP2551-I/SNVAO by Microchip Tech is a CAN transceiver with 1Mbps data rate, 5V supply voltage, and 75mA max supply current. Ideal for industrial applications, it operates b/w -40 to 85°C and features AEC-Q100 screening level for automotive use.

KSZ8721CL

Micrel

ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: LFQFP; Package Shape: SQUARE;

VSC8514XMK-14

Microsemi

ETHERNET TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: BUTT; No. of Terminals: 138; Package Code: HVBCC; Package Shape: SQUARE;

TJA1041T/CM,118

NXP Semiconductors

NXP Semiconductors' TJA1041T/CM,118 is a Network Interface IC with 14 terminals in a small outline package. It operates at 5V nominal voltage and has a peak reflow temperature of 260°C. Ideal for telecom applications, it features Gull Wing terminal form and dual position.

KSZ8041FTLI-TR

Microchip Technology

Microchip's KSZ8041FTLI-TR is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85°C. It features a 48-terminal flatpack package suitable for industrial applications. With a supply voltage of 3.3V and low current draw of 58.3mA, it's ideal for network interfaces in various electronic devices.

DP83849IDVSX/NOPB

Texas Instruments

DP83849IDVSX/NOPB by Texas Instruments is an Ethernet transceiver with 4 transceivers, operating at 100000 Mbps. It has a supply voltage of 3.3V and temperature range from -40 to 85°C, suitable for industrial applications. The package style is flatpack with thin profile and fine pitch, making it ideal for network interfaces in compact designs.

KSZ9031MNXIC

Micrel

ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 64; Package Code: HVQCCN; Package Shape: SQUARE;

KSZ9021RN

Micrel

ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;

DP83848KSQ/NOPB

National Semiconductor

ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 40; Package Code: HVQCCN; Package Shape: SQUARE;

KSZ9897RTXC-TR

Microchip Technology

Microchip Technology's KSZ9897RTXC-TR is an Ethernet transceiver with 128 terminals in a square package. Operating temperature ranges from 0 to 70°C, suitable for commercial use. It features matte tin terminal finish and is designed for network interfaces requiring a nominal voltage of 1.2V.

NCV7351D13R2G

Onsemi

NCV7351D13R2G by Onsemi is an automotive-grade interface circuit with a 5V supply voltage and 1Mbps data rate. It features a small outline package style, matte tin terminal finish, and dual terminal position. Ideal for network interfaces in automotive applications due to AEC-Q100 screening level.

VSC8514XMK-14

Microchip Technology

VSC8514XMK-14 by Microchip: 4 Ethernet transceivers, 1000 Mbps data rate, 605 mA max supply current. Ideal for automotive applications with operating temp range -40 to 125°C. Chip carrier package style with 138 terminals in square shape.

SN65HVD231QDR

Texas Instruments

SN65HVD231QDR by Texas Instruments is a BICMOS interface circuit with 1Mbps data rate and 3.3V nominal voltage. It operates in automotive temperature grade range (-40 to 125°C) and has a small outline package style for surface mount applications. With low supply current (0.017mA), it's ideal for network interfaces in automotive electronics.

ISO1050DUB

Texas Instruments

ISO1050DUB by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, Gull Wing terminal form, and nickel palladium gold finish. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.

PCA82C251T/YM,118

NXP Semiconductors

PCA82C251T/YM,118 by NXP Semiconductors is an 8-terminal interface circuit with a 5V supply voltage. It operates in automotive-grade temperatures (-40 to 125°C) and features BICMOS technology. This small-outline package is ideal for network interfaces in automotive applications.

KSZ9031RNXCC

Microchip Technology

KSZ9031RNXCC by Microchip: Ethernet transceiver with 1000 Mbps data rate, operates at 0-70°C. Features 48 terminals in square chip carrier package for network interfaces. Ideal for commercial telecom applications requiring a compact design and low power consumption.

PCA82C251T/YM

NXP Semiconductors

PCA82C251T/YM by NXP Semiconductors is a CAN transceiver with 8 terminals, operating from -40 to 125°C. It has a supply voltage of 5V and max current of 78mA, suitable for automotive applications. The package is small outline, surface mountable, with Gull Wing terminals.

KSZ8851SNLI

Micrel

ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;