Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

KSZ8041NLI

Manufacturer

Microchip Technology
Manufacturer's Part Number

KSZ8041NLI
Description

ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
Datasheet

Datasheet

Not In Stock

Popular Products

1N4148

Weitron Technology

RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);

Details

KSZ9031RNXIA

Microchip Technology

KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.

Details

ERJ6ENF10R0V

Panasonic

Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.

Details

LL4148

Fairchild Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

MMBT3904LT1G

Onsemi

MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.

Details

1N4148

National Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

DS18B20Z+T&R

Analog Devices

DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.

Details

SMBJ18CA

Protek Devices

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Rectron

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

ULN2803A

Sanken Electric

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;

Details

BSS138

Micro Commercial Components

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;

Details

1N4148WT

Taitron Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM7805CT/NOPB

National Semiconductor

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;

Details

BAV99

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138

Diodes Incorporated

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;

Details

ERJ3GEY0R00V

Panasonic

ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.

Details

BSS138DW-7-F

Diodes Incorporated

BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.

Details

DP83848IVVX/NOPB

National Semiconductor

ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;

Details

LM358N

STMicroelectronics

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

2N2222A

SPC TECHNOLOGY/ MULTICOMP

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

KSZ8041NLI Technical Details

TYPE	DESCRIPTION
Package Body Material:	UNSPECIFIED
Nominal Supply Voltage:	3.3 V
Maximum Time At Peak Reflow Temperature (s):	30
Maximum Seated Height:	.9 mm
Surface Mount:	YES
Terminal Finish:	MATTE TIN
No. of Terminals:	32
No. of Transceivers:	1
Terminal Position:	QUAD
Package Style (Meter):	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
Data Rate:	100 Mbps
Screening Level:	TS 16949
Technology:	CMOS
JESD-30 Code:	S-XQCC-N32
Package Shape:	SQUARE
Terminal Form:	NO LEAD
Maximum Operating Temperature:	85 Cel
Package Code:	HVQCCN
Width:	5 mm
Moisture Sensitivity Level (MSL):	2
Telecom IC Type:	ETHERNET TRANSCEIVER
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Package Equivalence Code:	LCC32,.2SQ,20
Length:	5 mm
Peak Reflow Temperature (C):	260
Terminal Pitch:	.5 mm
Temperature Grade:	INDUSTRIAL

Category Top Products

TLE7250GXUMA1

Infineon Technologies

TLE7250GXUMA1 by Infineon is an AEC-Q100 compliant interface circuit with 8 terminals, 5V supply voltage, and 1.27mm terminal pitch. It is designed for telecom applications requiring small outline package style and dual terminal position for compact designs.

MCP2562-E/MFVAO

Microchip Technology

MCP2562-E/MFVAO by Microchip: CAN transceiver for automotive apps. Operates at 1 Mbps, 5V supply voltage, -40 to 125°C temp range. Small outline package with 8 terminals, AEC-Q100 screening.

TJA1043T,118

NXP Semiconductors

NXP Semiconductors' TJA1043T,118 is a CAN transceiver with 5V nominal voltage and 1Mbps data rate. It features 14 terminals in a small outline package for automotive applications. AEC-Q100 screening level ensures reliability in harsh environments.

VSC8211XVW

Vitesse Semiconductor

ETHERNET TRANSCEIVER; Terminal Form: BALL; No. of Terminals: 117; Package Code: LBGA; Package Shape: RECTANGULAR; Width: 10 mm;

TJA1020T/CM,118

NXP Semiconductors

NXP Semiconductors' TJA1020T/CM,118 is an AEC-Q100 compliant interface circuit with 8 terminals in a small outline package. It operates at a nominal voltage of 12V and can withstand peak reflow temperatures up to 260°C. This telecom IC is designed for network interfaces in automotive applications.

MCP2561T-E/SN

Microchip Technology

MCP2561T-E/SN by Microchip: CAN transceiver for automotive apps. Operates at 1 Mbps, 5V supply, -40 to 125°C temp range. Small outline package with 8 terminals and matte tin finish.

AD9371BBCZ

Analog Devices

AD9371BBCZ by Analog Devices is a network interface IC with 196 terminals in a square grid array package. It operates b/w -40 to 85°C, suitable for industrial telecom applications. The IC has a nominal voltage of 1.3V and terminal pitch of 0.8mm, making it ideal for high-performance communication systems.

KSZ9897RTXI-TR

Microchip Technology

Microchip Technology's KSZ9897RTXI-TR is an Ethernet transceiver with 128 terminals, operating temperature range of -40 to 85°C. It features a matte tin finish, quad terminal position, and thin profile package style. Ideal for industrial applications requiring reliable network interfaces in compact spaces.

MCP2542FD-E/MF

Microchip Technology

MCP2542FD-E/MF by Microchip is a CAN FD transceiver with 8 Mbps data rate, suitable for automotive applications. It operates at -40 to 125°C temperature range and requires 5V nominal voltage. The package style is small outline, heat sink/slug, very thin profile with matte tin terminal finish.

USB3320C-EZK-TR

Standard Microsystems

INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;

AD9371BBCZ-REEL

Analog Devices

AD9371BBCZ-REEL by Analog Devices is a network interface IC with 196 terminals in a grid array package. It operates b/w -40 to 85°C, suitable for industrial telecom applications. Features include a 1.3V supply voltage, tin silver copper terminal finish, and a compact square package shape of 12x12mm².

TJA1044GTKZ

NXP Semiconductors

INTERFACE CIRCUIT; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;

KSZ8863FLLI

Micrel

LAN SWITCHING CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: LFQFP; Package Shape: SQUARE;

TJA1042T/CM,118

NXP Semiconductors

NXP Semiconductors' TJA1042T/CM,118 is a network interface IC with 8 terminals and AEC-Q100 screening. Operating at 5V, it supports data rates up to 1 Mbps for automotive applications. The small outline package with dual terminal position makes it suitable for compact designs in harsh environments.

KSZ8895FQXIA

Micrel

ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 128; Package Code: FQFP; Package Shape: RECTANGULAR;

ATA6561-GBQW-N

Microchip Technology

ATA6561-GBQW-N by Microchip: CAN FD transceiver with 5 Mbps data rate, 70 mA supply current, and 5V nominal voltage. Ideal for automotive applications due to TS16949 screening level and -40 to 150 °C operating temperature range.

MCP2551-I/SN

Microchip Technology

MCP2551-I/SN by Microchip Technology is a CAN transceiver with a data rate of 1 Mbps. It operates at a nominal voltage of 5V and has a max supply current of 75mA. This network interface is commonly used in industrial applications requiring reliable communication.

NCN5130MNTWG

Onsemi

The Onsemi NCN5130MNTWG is a network interface chip carrier with 40 terminals, operating b/w -40 to 105°C. It features matte tin finish, quad terminal position, and 3.3V supply voltage suitable for industrial telecom applications. With a compact square shape of 6x6mm and very thin profile, it's ideal for surface mount designs requiring high-temperature resilience.

MAX14882AWE+

Maxim Integrated

INTERFACE CIRCUIT; Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN;

LAN8710AI-EZC-TR

Standard Microsystems

ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;