Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

24AA256T-I/SN

Manufacturer

Microchip Technology
Manufacturer's Part Number

24AA256T-I/SN
Description

EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Moisture Sensitivity Level (MSL): 1;
Datasheet

Datasheet

Not In Stock

Popular Products

ULN2803A

Motorola

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;

Details

2N7002,215

NXP Semiconductors

2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.

Details

BSS123,215

Nexperia

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;

Details

SS14

Goodwork Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WS

Tak Cheong Electronics Holdings

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

SPC TECHNOLOGY/ MULTICOMP

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LM555CM

Intersil

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

BAV99

Infinex

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

STMicroelectronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;

Details

SDR0604-101KL

Bourns

SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.

Details

1N4148

Diotec Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM317T

Texas Instruments

LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.

Details

MBRS360T3G

Onsemi

MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.

Details

LM7805CT/NOPB

National Semiconductor

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;

Details

1N4148

Wuxi Xuyang Electronic

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SMBJ18CA

Goodwork Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Surge Components

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

2N7002

Nte Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;

Details

LL4148

Sangdest Microelectronics (Nanjing)

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

NUP2105LT1G

Onsemi

NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.

Details

24AA256T-I/SN Technical Details

TYPE	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Maximum Time At Peak Reflow Temperature (s):	30
Programming Voltage (V):	2.5
Minimum Supply Voltage (Vsup):	1.7 V
Sub-Category:	EEPROMs
Surface Mount:	YES
Screening Level:	AEC-Q100
Technology:	CMOS
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Operating Mode:	SYNCHRONOUS
Package Code:	SOP
Moisture Sensitivity Level (MSL):	1
No. of Ports:	1
Memory Width:	8
Qualification:	Not Qualified
Package Equivalence Code:	SOP8,.23
Minimum Data Retention Time:	200
Peak Reflow Temperature (C):	260
Terminal Pitch:	1.27 mm
Reverse Pinout:	NO
Maximum Standby Current:	.000005 Amp
Organization:	32KX8
Output Characteristics:	OPEN-DRAIN
Maximum Seated Height:	1.75 mm
Maximum Supply Current:	3 mA
Terminal Finish:	MATTE TIN
Maximum Write Cycle Time (tWC):	5 ms
No. of Terminals:	8
I2C Control Byte:	1010DDDR
Maximum Clock Frequency (fCLK):	.4 MHz
No. of Words:	32768 words
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
Write Protection:	HARDWARE
JESD-30 Code:	R-PDSO-G8
Maximum Operating Temperature:	85 Cel
Endurance:	1000000 Write/Erase Cycles
Width:	3.9 mm
Serial Bus Type:	I2C
Other Names:	24AA256T-I/SN-NDR 24AA256T-I/SNDKR 24AA256T-I/SNTR 24AA256T-I/SNCT 24AA256TI/SN 24AA256T-I/SN-ND
Memory Density:	262144 bit
Memory IC Type:	EEPROM
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Length:	4.9 mm
No. of Words Code:	32K
Nominal Supply Voltage / Vsup (V):	2.5
Parallel or Serial:	SERIAL
Temperature Grade:	INDUSTRIAL
Maximum Supply Voltage (Vsup):	5.5 V
Power Supplies (V):	1.8/5

Category Top Products

AT28LV010-20JU-235

Microchip Technology

AT28LV010-20JU-235 by Microchip is a 128Kx8 EEPROM with 3.3V supply, 200ns access time, and 100000 write/erase cycles. It is used in industrial applications for non-volatile memory storage due to its high endurance and parallel interface.

AT28LV010-20JU-630

Microchip Technology

AT28LV010-20JU-630 by Microchip is a 128KX8 EEPROM with 3.3V supply, operating from -40 to 85 °C. It offers 100000 Write/Erase Cycles, 200 ns access time, and supports hardware/software write protection. Ideal for industrial applications requiring reliable non-volatile memory storage in a compact chip carrier package.

24LC16BT-I/MS

Microchip Technology

24LC16BT-I/MS by Microchip Technology is an EEPROM with 2Kx8 organization, 16384-bit memory density, and 1000000 write/erase cycles. It operates in industrial temperature grade range (-40 to 85°C) and uses I2C serial bus for control. Ideal for applications requiring reliable non-volatile memory storage in harsh environments.

AT24CM01-SHD-B

Microchip Technology

AT24CM01-SHD-B by Microchip is a 128Kx8 EEPROM with I2C control, operating at 5V. It offers 1000000 write/erase cycles, serial interface, and hardware write protection. Ideal for industrial applications requiring reliable non-volatile memory storage in a compact rectangular package.

DS2431G+U

Analog Devices

DS2431G+U by Analog Devices is a 1024-bit EEPROM with 50000 write/erase cycles. It operates at 3.3V, has a temperature range of -40 to 85°C, and uses a serial bus type: 1-WIRE. Ideal for applications requiring low-power memory storage in industrial settings.

DS2431P/TR

Dallas Semiconductor

DS2431P/TR by Dallas Semiconductor is a 1024-bit EEPROM with 1-WIRE serial bus. It operates at 3.3V, has 50000 write/erase cycles, and -40 to 85°C temperature range. Ideal for industrial applications requiring secure data storage in compact form factor.

DS28E22P+T

Maxim Integrated

EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: SOC; Package Shape: RECTANGULAR; Minimum Operating Temperature: -40 Cel;

24LC256-E/ST

Microchip Technology

24LC256-E/ST by Microchip Technology is an EEPROM with 32KX8 organization, operating at 4.5V. It features I2C control byte 1010DDDR and offers 1000000 write/erase cycles. Ideal for automotive applications due to AEC-Q100 screening level, it has a small outline package style and operates in the temperature range of -40 to 125 °C.

24AA64T-I/SN

Microchip Technology

24AA64T-I/SN by Microchip Technology is an 8KX8 EEPROM with I2C serial bus, operating at 4.5V and 0.4 MHz clock frequency. It has a memory density of 65536 bits and can endure up to 1000000 write/erase cycles. Ideal for industrial applications requiring reliable non-volatile memory storage in a compact package style with dual terminal position.

XCF16PVOG48C

Xilinx

Xilinx XCF16PVOG48C is a 1.8V EEPROM with 16MX1 organization, NOR type, and 16777216-bit memory density. It operates in industrial temperature range (-40 to 85°C) and offers 20000 write/erase cycles. Ideal for configuration memory applications due to its small outline package style and serial interface.

24AA1025-I/SN

Microchip Technology

24AA1025-I/SN by Microchip Technology is an EEPROM with 128KX8 organization, 1048576 bit memory density, and 1000000 Write/Erase Cycles endurance. It operates in industrial temperature grade, has a max clock frequency of 0.4 MHz, and uses I2C serial bus type. Ideal for applications requiring reliable non-volatile memory storage in harsh environments.

CAT24C04WI-GT3

Catalyst Semiconductor

EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; I2C Control Byte: 1010DDMR;

X28HC256JI-12

Intersil

EEPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 32; Package Code: QCCJ; Package Shape: RECTANGULAR; Maximum Write Cycle Time (tWC): 5 ms;

DS24B33G+U

Maxim Integrated

EEPROM CARD; Temperature Grade: INDUSTRIAL; No. of Terminals: 2; Parallel or Serial: SERIAL; Memory Density: 4096 bit; JESD-609 Code: e4;

DS1990A-F5+

Analog Devices

DS1990A-F5+ by Analog Devices is a 64-bit EEPROM with 1-WIRE serial bus. Operating at 3.3V, it has an industrial temperature grade and asynchronous mode. Ideal for applications requiring secure data storage in harsh environments.

DS28EC20P+

Analog Devices

DS28EC20P+ by Analog Devices is a 20Kx1 EEPROM with 20480 bit memory density. It operates at -40 to 85°C, supports 1-WIRE serial bus, and has 200000 write/erase cycles endurance. Ideal for industrial applications requiring small outline package with asynchronous operation.

24AA256-I/SM

Microchip Technology

24AA256-I/SM by Microchip Technology is a 32KX8 EEPROM with 262144 bit memory density. Operating at 2.5V, it offers 1000000 Write/Erase Cycles endurance and supports I2C serial bus type. Ideal for industrial applications requiring reliable non-volatile memory storage in compact designs.

24LC64F-I/P

Microchip Technology

24LC64F-I/P by Microchip Technology is an 8KX8 EEPROM with 65536 bit memory density. It operates at 0.4 MHz clock frequency, has 1000000 Write/Erase Cycles endurance, and supports I2C serial bus type. Ideal for industrial applications requiring reliable data storage in a compact package.

XCF01SVOG20C

Xilinx

The Xilinx XCF01SVOG20C is a 1MX1 NOR type EEPROM with a memory density of 1048576 bits. It operates at a nominal voltage of 3.3V and has an endurance of 20000 write/erase cycles. This configuration memory is commonly used in industrial applications for storing and retrieving data efficiently.

DS2433

Maxim Integrated

Maxim Integrated's DS2433 EEPROM features 4096-bit memory density, 50000 write/erase cycles endurance, and operates on a 1-Wire serial bus. Ideal for industrial applications, it has a cylindrical package with bottom terminal position and supports asynchronous operation at temperatures ranging from -40 to 85°C.