Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

SPX3819M5-L-3.3/TR

Manufacturer

Maxlinear
Manufacturer's Part Number

SPX3819M5-L-3.3/TR
Description

FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 1 %; Package Style (Meter): SMALL OUTLINE, LOW PROFILE, SHRINK PITCH;
Datasheet

Datasheet

Not In Stock

Popular Products

SMBJ18CA

Micro Commercial Components

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M39029/58-360

Tri-star Electronics International

CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;

Details

BSS138

Taitron Components

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;

Details

LM317T

Bay Linear

Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;

Details

1N4148

Texas Instruments

1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.

Details

U.FL-R-SMT-1(10)

Hirose Electric

U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.

Details

LM78L05ACMX/NOPB

National Semiconductor

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;

Details

1N4148

Central Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BAV99

Daco Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M24308/2-1F

Air Electro

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;

Details

EU2B-YS3203F

Idec

ROTARY SWITCH;

Details

1N4148

Unitrode

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N7002

Inter F E T

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;

Details

2N2222A

Diotec Semiconductor Ag

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;

Details

2N2222A

Cobham Plc

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;

Details

BSS138LT1G

Onsemi

BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.

Details

BAV99

Weitronic Enterprise

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WS

Daco Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M39029/58360

Esterline Technologies

CONNECTOR ACCESSORY; Terminal Type: CRIMP; Removal Tools: M81969/14-01; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT;

Details

SS14

Changzhou Galaxy Century Microelectronics

RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;

Details

SPX3819M5-L-3.3/TR Technical Details

TYPE	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Maximum Seated Height:	1.45 mm
Surface Mount:	YES
Regulator Type:	FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR
Terminal Finish:	MATTE TIN
Maximum Output Current-1:	.5 A
No. of Terminals:	5
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH
JESD-30 Code:	R-PDSO-G5
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Nominal Output Voltage-1:	3.3 V
Operating Temperature (TJ-Max):	125 Cel
Package Code:	LSSOP
Qualification Status:	Not Qualified
Width:	1.6 mm
Maximum Dropout Voltage-1:	.7 V
Moisture Sensitivity Level (MSL):	1
Minimum Input Voltage:	2.5 V
Maximum Output Voltage-1:	3.333 V
Maximum Input Voltage:	16 V
Packing Method:	TR
Minimum Output Voltage-1:	3.267 V
JESD-609 Code:	e3
Maximum Voltage Tolerance:	1 %
No. of Functions:	1
Operating Temperature (TJ-Min):	-40 Cel
Length:	2.9 mm
Terminal Pitch:	.95 mm

Category Top Products

TPS73033DBVT

Texas Instruments

TPS73033DBVT by Texas Instruments is a Fixed Positive Single Output LDO Regulator with 3.3V Nominal Output Voltage, 0.2A Max Output Current, and 2% Max Voltage Tolerance. It is ideal for applications requiring stable voltage regulation in a compact form factor, such as portable electronics and IoT devices.

MIC5365-3.3YC5-TR

Microchip Technology

MIC5365-3.3YC5-TR by Microchip Technology is a fixed positive single output LDO regulator with a max output current of 0.15 A and a dropout voltage of 0.31 V. It is commonly used in applications requiring stable voltage regulation, such as power management in electronic devices.

MC33269T-3.3G

Onsemi

MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.

MIC5504-3.3YM5-T5

Microchip Technology

MIC5504-3.3YM5-T5 by Microchip is a CMOS LDO regulator with 3.3V output, 0.3A max current, and 1.45mm seated height. Ideal for applications requiring fixed positive single output regulators in automotive electronics due to TS 16949 screening level and -40 to 125 °C operating temperature range.

LT1962EMS8-5#PBF

Linear Technology

FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2.5 %;

MCP1702T-5002E/CB

Microchip Technology

MCP1702T-5002E/CB by Microchip Technology is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.25A Max Output Current, and 0.65V Max Dropout Voltage. It is ideal for applications requiring stable voltage regulation in compact spaces with limited input voltage range.

AP7375-33W5-7

Diodes Incorporated

FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; Terminal Finish: MATTE TIN; JESD-609 Code: e3;

LDL1117S33R

STMicroelectronics

STMicroelectronics' LDL1117S33R is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.2A. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline, with surface mount capability and matte tin terminal finish for easy integration into electronic designs.

TPS7A6633QDGNRQ1

Texas Instruments

TPS7A6633QDGNRQ1 by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.15A. It operates in temperatures ranging from -40 to 150°C, making it suitable for automotive applications requiring stable voltage regulation in harsh environments. With a compact package style and excellent load regulation of 0.02%, this CMOS technology-based regulator is ideal for space-constrained designs that demand high performance and reliability.

MIC5283-5.0YME-TR

Microchip Technology

MIC5283-5.0YME-TR by Microchip is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.15A Max Output Current, and 2.8V Max Dropout Voltage. It is ideal for applications requiring stable voltage regulation in compact spaces due to its low profile package style and small outline design.

LT1963AEQ-3.3#TRPBF

Linear Technology

FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 3 %;

LP2985IM5-2.5/NOPB

Texas Instruments

LP2985IM5-2.5/NOPB by Texas Instruments is a fixed positive single output LDO regulator with 2.5V nominal output voltage and 0.15A max output current. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs.

TPS73733DCQG4

Texas Instruments

TPS73733DCQG4 by Texas Instruments is a fixed positive single output LDO regulator with a max output current of 1A and a nominal output voltage of 3.3V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices.

TC1185-3.3VCT713

Microchip Technology

Microchip TC1185-3.3VCT713 is a 3.3V LDO regulator with 0.4A output current, ideal for automotive applications due to its TS16949 screening level and wide operating temperature range (-40 to 125°C). It features a small outline package, low profile design, and excellent line/load regulation of 0.01155%/0.099%.

REG1117-5

Texas Instruments

The Texas Instruments REG1117-5 is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.8A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline, ideal for surface mount designs.

LM2936MP-3.0/NOPB

Texas Instruments

LM2936MP-3.0/NOPB by Texas Instruments is a fixed positive single output LDO regulator with 3% voltage tolerance, 0.4V dropout voltage, and 0.05A output current. Ideal for applications requiring stable 3V output voltage in compact designs with operating temperatures ranging from -40 to 150°C.

LP5951MG-1.8/NOPB

National Semiconductor

FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 6.5 V; Maximum Voltage Tolerance: 3.5 %;

TPS70950DRVT

Texas Instruments

TPS70950DRVT by Texas Instruments is a fixed positive single output LDO regulator with a max output current of 0.15A and a nominal output voltage of 5V. It operates in an input voltage range from 2.7V to 30V, making it suitable for various applications requiring stable power supply within tight voltage tolerances. The compact package style and surface-mount capability enhance its versatility in space-constrained designs.

MIC37100-3.3WS

Microchip Technology

MIC37100-3.3WS by Microchip Technology is a fixed positive single output LDO regulator with 1A max output current, 3.3V nominal output voltage, and 2% max voltage tolerance. Ideal for applications requiring stable power supply in compact spaces due to its small outline package style and low dropout voltage of 0.5V.

SPX3819M5-L-2.5/TR

Maxlinear

FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 1 %; Width: 1.6 mm;