Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

SPX3819M5-L-3-3/TR

Manufacturer

Maxlinear
Manufacturer's Part Number

SPX3819M5-L-3-3/TR
Description

FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 1 %; Nominal Output Voltage-1: 3.3 V;
Datasheet

Datasheet

Not In Stock

Popular Products

2N7002

Micro Commercial Components

Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;

Details

ABS10-32.768KHZ-T

Abracon

Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.

Details

06035C103KAT2A

KYOCERA AVX

06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.

Details

LM555CM

Intersil

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

1N4148

Continental Device India

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SMBJ18CA

Littelfuse

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SS14

Cheng-yi Electronic

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LD1117S33TR

STMicroelectronics

LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.

Details

LIS2DH12TR

STMicroelectronics

LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.

Details

1N4148

Semiconductors

RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;

Details

LL4148

Rugao Dachang Electronic

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

STM32H753ZIT6

STMicroelectronics

STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.

Details

1N4148

Diotec Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

NC7WZ17P6X

Onsemi

The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.

Details

LM2931Z-5.0G

Onsemi

LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.

Details

M39029/56-351

Glenair

CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;

Details

M39029/56-351

Amphenol

CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;

Details

LM2675M-ADJ/NOPB

Texas Instruments

LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.

Details

M39029/58-360

Molex

CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;

Details

SS14

Goodwork Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SPX3819M5-L-3-3/TR Technical Details

TYPE	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Maximum Seated Height:	1.45 mm
Surface Mount:	YES
Regulator Type:	FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR
Terminal Finish:	MATTE TIN
Maximum Output Current-1:	.5 A
No. of Terminals:	5
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH
JESD-30 Code:	R-PDSO-G5
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Nominal Output Voltage-1:	3.3 V
Operating Temperature (TJ-Max):	125 Cel
Package Code:	LSSOP
Qualification Status:	Not Qualified
Width:	1.6 mm
Maximum Dropout Voltage-1:	.7 V
Moisture Sensitivity Level (MSL):	1
Minimum Input Voltage:	2.5 V
Maximum Output Voltage-1:	3.333 V
Maximum Input Voltage:	16 V
Packing Method:	TR
Minimum Output Voltage-1:	3.267 V
JESD-609 Code:	e3
Maximum Voltage Tolerance:	1 %
No. of Functions:	1
Operating Temperature (TJ-Min):	-40 Cel
Length:	2.9 mm
Peak Reflow Temperature (C):	260
Terminal Pitch:	.95 mm

Category Top Products

LP5951MG-3.3/NOPB

Texas Instruments

LP5951MG-3.3/NOPB by Texas Instruments is a 3.3V fixed positive single output LDO regulator with a max dropout voltage of 0.25V and max output current of 0.15A. Ideal for applications requiring stable voltage regulation in compact spaces due to its small outline, thin profile package style, and surface mount capability.

ADP7142AUJZ-5.0-R7

Analog Devices

ADP7142AUJZ-5.0-R7 by Analog Devices is a CMOS LDO regulator with 5V output voltage, 0.2A output current, and 1mm max seated height. Ideal for applications requiring fixed positive single output regulators in compact spaces due to its small outline package style and wide operating temperature range from -40°C to 125°C.

PTLV75518PDBVR

Texas Instruments

FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR;

LM2931AS-5.0/NOPB

National Semiconductor

FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 26 V; Maximum Voltage Tolerance: 5 %;

LT1086CM-3.3#TRPBF

Analog Devices

Analog Devices' LT1086CM-3.3#TRPBF is a fixed positive single output LDO regulator with 1.5A max output current, 3.3V nominal output voltage, and 1.5V dropout voltage. Ideal for applications requiring stable voltage regulation in a compact package, such as consumer electronics or industrial control systems.

LP2985IM5-3.3/NOPB

National Semiconductor

FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 16 V; Maximum Voltage Tolerance: 4 %;

LP5912-3.3DRVT

Texas Instruments

LP5912-3.3DRVT by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.5A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline, heat sink/slug, very thin profile, ideal for surface mount designs with limited space constraints.

LM2940SX-5.0/NOPB

National Semiconductor

FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 60 V; Maximum Voltage Tolerance: 5 %;

LP2981-33DBVRG4

Texas Instruments

LP2981-33DBVRG4 by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It features a small outline, low profile package style and operates within an extended temperature range from -40°C to 125°C. Ideal for applications requiring stable voltage regulation in compact electronic devices.

LT1761ES5-3.3#TRMPBF

Analog Devices

Analog Devices' LT1761ES5-3.3#TRMPBF is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It features a small outline, thin profile package style suitable for surface mount applications in various electronic devices, ensuring stable performance with low dropout voltage and high line regulation accuracy.

MCP1826ST-3302E/DB

Microchip Technology

MCP1826ST-3302E/DB by Microchip Technology is a fixed positive single output LDO regulator with a max output current of 1A. It has a nominal output voltage of 3.3V and can operate in temperatures ranging from -40°C to 125°C. This regulator is commonly used in applications that require stable and regulated power supply, such as consumer electronics and industrial equipment.

LP2992AILD-5.0/NOPB

National Semiconductor

FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: HVSSON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 16 V; Maximum Voltage Tolerance: 4.5 %;

AP7375-33SA-7

Diodes Incorporated

FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; JESD-609 Code: e3; Terminal Finish: MATTE TIN;

LM2931AS-5.0/NOPB

Texas Instruments

LM2931AS-5.0/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.6V, suitable for applications requiring stable voltage regulation in a compact package. It operates within a temperature range of -40 to 125°C, making it ideal for various electronic devices where space and efficiency are crucial factors. With surface mount capability and low load regulation, this regulator ensures reliable performance in diverse environments.

LP2950CDT-3.3

Motorola

FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Dropout Voltage-1: .45 V; JESD-30 Code: R-PSSO-G2;

MIC5233-3.3YM5-TR

Microchip Technology

MIC5233-3.3YM5-TR by Microchip is a fixed positive single output LDO regulator with 3.3V nominal output voltage, 0.1A max output current, and 2% max voltage tolerance. It is ideal for applications requiring low dropout voltage and operates in temperatures ranging from -40 to 125°C.

AZ1117CH-5.0TRG1

Diodes Incorporated

Diodes Incorporated's AZ1117CH-5.0TRG1 is a fixed positive single output LDO regulator with a max output current of 0.8A and a nominal output voltage of 5V. It has a small outline package style, operates b/w -20°C to 125°C, and is suitable for applications requiring stable voltage regulation in compact electronic devices.

LP2951-50DG4

Texas Instruments

LP2951-50DG4 by Texas Instruments is a fixed positive single output LDO regulator with 5V nominal output voltage and 0.1A max output current. It has a small outline package style, operates b/w -40 to 125°C, and offers excellent line/load regulation for applications requiring stable voltage supply in compact designs.

LM2936HVBMA-3.3/NOPB

Texas Instruments

LM2936HVBMA-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.05A max output current. It has a small outline package style, operates b/w -40 to 150 °C, and offers low dropout voltage of 0.2V for applications requiring stable voltage regulation in compact designs.

LM1117MP-2.5/NOPB

National Semiconductor

FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2 %;