Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

MAX3485ECSA+T

Manufacturer

Maxim Integrated
Manufacturer's Part Number

MAX3485ECSA+T
Description

LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

Not In Stock

Popular Products

LM358M

Onsemi

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

1N4148

General Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BSS123,215

Nexperia

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;

Details

LM7805CT/NOPB

National Semiconductor

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;

Details

LM555CN

Texas Instruments

LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.

Details

1552200168

Molex

WIRE AND CABLE;

Details

OPA2277UA/2K5

Burr-Brown Corporation

OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

2N2222A

NXP Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;

Details

SMBJ18CA

Lite-on Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138

Taitron Components

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;

Details

STM32H743BIT6

STMicroelectronics

STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.

Details

2N7002

Panjit International

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;

Details

BAV99

Nexperia

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ISO1050DUBR

Texas Instruments

ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.

Details

0462-201-16141

TE Connectivity

TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.

Details

1N4148

Philips Components

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BSS138

Jiangsu Changjiang Electronics Technology

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): .22 A; Package Shape: RECTANGULAR;

Details

OPA2277UA/2K5

Texas Instruments

OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.

Details

1N4148WS

Fairchild Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M24308/2-1F

Defense Logistics Agency

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Empty Shell: NO;

Details

MAX3485ECSA+T Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	3 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	3.3 V
Maximum Time At Peak Reflow Temperature (s):	30
Maximum Seated Height:	1.75 mm
Surface Mount:	YES
Terminal Finish:	MATTE TIN
No. of Terminals:	8
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
JESD-30 Code:	R-PDSO-G8
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Maximum Operating Temperature:	70 Cel
Package Code:	SOP
Interface Standard:	EIA-422; EIA-485
Interface IC Type:	LINE TRANSCEIVER
Width:	3.9 mm
Moisture Sensitivity Level (MSL):	1
Input Characteristics:	DIFFERENTIAL SCHMITT TRIGGER
Driver No. of Bits:	1
Maximum Supply Voltage:	3.6 V
Differential Output:	YES
JESD-609 Code:	e3
Minimum Operating Temperature:	0 Cel
No. of Functions:	1
Qualification:	Not Qualified
Maximum Transmit Delay:	35 ns
Receiver No. of Bits:	1
Length:	4.9 mm
Maximum Receive Delay:	0 ns
Peak Reflow Temperature (C):	260
Terminal Pitch:	1.27 mm
Temperature Grade:	COMMERCIAL

Category Top Products

SN65LVDS1DBV

Texas Instruments

SN65LVDS1DBV by Texas Instruments is a line driver with a max supply voltage of 3.6 V and a max transmit delay of 3.1 ns. It is used in applications requiring TTL technology and EIA-644-A/TIA-644-A interface standards.

ISO35TDW

Texas Instruments

ISO35TDW by Texas Instruments is a line driver with 16 terminals, operating at 3.3V. It features a max transmit delay of 340ns and can handle up to 8A output low current. Ideal for EIA-485 and EIA-422 interfaces in industrial applications due to its high-speed differential output capabilities.

ISL83483IBZ-T

Intersil

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

MAX3232CDWR

Texas Instruments

MAX3232CDWR by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at 3.3/5V power supplies. It features a max transmit delay of 300ns and interface standards EIA-232-F; TIA-232-F; V.28, suitable for commercial temperature grade applications requiring reliable data transmission over short distances.

MAX232AEWE+T

Analog Devices

MAX232AEWE+T by Analog Devices is a Line Driver & Receiver with 2 functions, operating at 5V. It has a max supply voltage of 5.5V and can withstand temperatures from -40 to 85°C. Ideal for industrial applications requiring EIA-232-E, TIA-232-E, V.28, or V.24 interface standards in a compact package style.

MAX232NSR

Texas Instruments

LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

SN65HVD1474DGKR

Texas Instruments

SN65HVD1474DGKR by Texas Instruments is an EIA-485 line transceiver with a 3.6V supply voltage, 20ns transmit delay, and 90ns receive delay. Ideal for automotive applications, it operates in temperatures from -40 to 125°C and features a small outline package with dual Gull Wing terminals.

ISO3080DWR

Texas Instruments

ISO3080DWR by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at -40 to 85°C. It features a max transmit delay of 1.3 ns and differential output polarity for EIA-422/485 interfaces. Ideal for industrial applications requiring high-speed data transmission in compact spaces.

L9637D

STMicroelectronics

L9637D by STMicroelectronics is a Line Transceiver IC with Schmitt Trigger input characteristics. It operates at 3-7V supply voltage range and conforms to ISO 9141 interface standard. Ideal for automotive applications requiring reliable communication over short distances.

SP3072EEN-L/TR

Exar

Exar's SP3072EEN-L/TR is a line transceiver with 1 driver and receiver bit. It operates at a max supply voltage of 3.6V and has a small outline package style. This IC is suitable for applications requiring EIA-422, EIA-485, or TIA-485 interface standards.

LTC485CS8#PBF

Linear Technology

LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

DS26C32ATMX/NOPB

National Semiconductor

LINE RECEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

ICL3232IBNZ-T

Renesas Electronics

Renesas Electronics' ICL3232IBNZ-T is a Line Transceiver with 2 functions, operating at -40 to 85°C. It supports EIA-232, TIA-232, V.24, and V.28 interfaces with Schmitt Trigger input characteristics. This small outline IC has a max supply voltage of 5.5V and is ideal for industrial applications requiring reliable communication over short distances.

MAX3483EESA+T

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

DS26LV32ATM/NOPB

National Semiconductor

LINE RECEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

MAX3221EIDBR

Texas Instruments

MAX3221EIDBR by Texas Instruments is a line driver/receiver with 16 terminals and operates at supply voltages of 3.3/5V. It features Schmitt trigger input characteristics, EIA-232-F/TIA-232-F/V.28 interface standards, and a max receive delay of 150ns. Ideal for industrial applications requiring reliable data transmission over long distances.

SN65HVD1476DGSR

Texas Instruments

SN65HVD1476DGSR by Texas Instruments is a line driver & receiver with 10 terminals, operating at 3.3V nominal voltage. It features EIA-485 interface standard, differential output, and peak reflow temperature of 260°C. Ideal for automotive applications due to its small outline package and wide temperature range from -40°C to 125°C.

ADM3485ARZ-REEL7

Analog Devices

ADM3485ARZ-REEL7 by Analog Devices is a CMOS Line Transceiver with EIA-422 and EIA-485 interface standards. It operates at 3.3V, has a max supply current of 2.2mA, and offers differential output. Ideal for industrial applications requiring reliable communication over short distances with low power consumption.

SP485EN-L/TR

Exar

Exar's SP485EN-L/TR is a BICMOS line transceiver with EIA-422 and EIA-485 interface standards. It operates at 5V, has a max supply voltage of 5.25V, and can withstand industrial temperatures from -40 to 85°C. Ideal for applications requiring differential output and Schmitt trigger input characteristics in compact designs.

MAX3232ECUP+

Analog Devices

MAX3232ECUP+ by Analog Devices is a Line Driver & Receiver with 20 terminals, operating at 3-5.5V. It features BICMOS technology, EIA-232 interface standard, and Schmitt trigger input characteristics. Ideal for applications requiring reliable data transmission in commercial temperature range of 0-70°C.