Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

CK1060

Manufacturer

Lorlin Electronics
Manufacturer's Part Number

CK1060
Description

ROTARY SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: DP6T; Type (Actuator): SPINDLE; Center Contact Plating: SILVER; Terminal Length: .161 inch;
Datasheet

Datasheet

Not In Stock

Popular Products

BAV99

Siemens

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358D-T

NXP Semiconductors

LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.

Details

AB26TRB-32.768KHZ--T

Abracon

AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.

Details

2N7002

Changzhou Galaxy Century Microelectronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;

Details

LM358AN

Onsemi

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

1N4148

Sinyork

RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;

Details

1N4148

Changzhou Galaxy Century Microelectronics

RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;

Details

CRG0805F10R

TE Connectivity

TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.

Details

LM358N

Freescale Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Telefunken Microelectronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

FDV303N

Onsemi

FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.

Details

FDN306P

Onsemi

FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.

Details

2N2222A

Hi-tron Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

BAV99

Electronic Devices

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138PS,115

Nexperia

N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;

Details

KSZ9031RNXIC

Micrel

ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;

Details

BSS138

Vishay Intertechnology

Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.

Details

1N4148

Vicor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

ERJ2RKF1002X

Panasonic

Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.

Details

1N4148WS

Sangdest Microelectronics (Nanjing)

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

CK1060 Technical Details

TYPE	DESCRIPTION
Maximum DC Contact Current:	1 A
No. of Positions:	6
Center Contact Plating:	SILVER
Center Contact Material:	BRASS
Type (Bushing):	M10X0.75
Length (Bushing):	.315 inch
Type (Actuator):	SPINDLE
Maximum AC Contact Voltage:	24 V
Switch Action:	LATCHED
Terminal Material:	BRASS
Termination Type:	SOLDER
Electrical Life:	10000 Cycle(s)
Maximum Operating Temperature:	85 Cel
Contact Resistance:	20 mohm
Insulation Resistance:	1000000000 ohm
Maximum AC Contact Current:	1 A
End Contact Material:	BRASS
No. of Switch Sections:	1
Maximum DC Contact Voltage:	24 V
DC Maximum Rating R Load (Contact):	1A@24VDC
PCB Hole Count:	14
Switch Type:	ROTARY SWITCH
AC Maximum Rating R Load (Contact):	1A@24VAC
Indexing Angle:	30 deg
Minimum Operating Temperature:	-30 Cel
Mounting Feature:	THROUGH HOLE-STRAIGHT
Switch Function:	DP6T
Contact Timing:	MAKE-BEFORE-BREAK
Terminal Length:	.161 inch
Length (Actuator):	1.654 inch
End Contact Plating:	SILVER
Body Height:	14.1 mm
Body Length/Diameter:	26.2 mm

Category Top Products

SRBV141201

Alps Alpine

Alps Alpine SRBV141201 is a SP4T rotary switch with 10000 cycles electrical life and 100M ohm insulation resistance. It has 4 positions, operates b/w -10 to 85°C, and supports up to 16VDC at 0.3A. Ideal for applications requiring a latched switch action with solder termination on PCBs.

PT65301

Apem Components

PT65301 by Apem Components is a rotary coded switch with 10 positions and a binary coded decimal switch function. It has a max DC contact voltage of 24V and an electrical life of 10000 cycles. This switch is commonly used in applications requiring ON-OFF contact function and can withstand temperatures ranging from -20°C to 70°C.

CK1049

Lorlin Electronics

CK1049 by Lorlin Electronics is a SP12T rotary switch with 12 positions, SILVER terminal finish, and 10000 cycle electrical life. It has a max AC contact voltage of 250V and operating temperature range from -30 to 85 °C. Ideal for applications requiring latched switch action in compact spaces.

A22W-2MR-12A-11

Omron

ROTARY SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPST; Type (Actuator): KNOB TYPE; Indexing Angle: 90 deg; Body Length/Diameter: 34 mm;

MRX402-A

Nkk Switches

MRX402-A by Nkk Switches is a 4PDT rotary switch with black brass housing. It has an electrical life of 7500 cycles and insulation resistance of 100M ohm. Ideal for applications requiring a rotary switch with 2A@125VAC AC max rating and 1A@30VDC DC max rating.

A22NS-2MM-NBA-G100-NN

Omron

ROTARY SWITCH;

A22NW-2BL-TGA-P202-GD

Omron

ROTARY SWITCH;

A22NW-2MM-TGA-G102-GE

Omron

ROTARY SWITCH;

A22NW-2BM-TAA-P100-AE

Omron

ROTARY SWITCH;

SH-7010TB

Nidec Copal Electronics

SH-7010TB by Nidec Copal Electronics is a rotary coded switch with 10 positions and a latched switch action. It features a waterproof stainless steel housing, copper alloy terminals, and gold plating on end contacts. Ideal for applications requiring binary coded decimal switching in environments with temperatures ranging from -40 to 85°C.

1825008-6

TE Connectivity

TE Connectivity's 1825008-6 Rotary Switch features POLYETHYLENE housing, GOLD OVER NICKEL plating, and BINARY CODED DECIMAL function. With 10 switch sections and a MINI-PLASTIC SHAFT actuator, it is ideal for PANEL MOUNT applications requiring a latched switch with 10 positions.

A22NW-2RL-TAA-G102-AA

Omron

ROTARY SWITCH;

A22NZ-3RM-TRA

Omron

ROTARY SWITCH;

71E30-02-1-09S

Grayhill

Grayhill's 71E30-02-1-09S Rotary Switch offers SP9T switch function with 15000 cycles electrical life. Featuring 9 positions, 0.3A@115VAC AC max rating, and gold over nickel terminal finish, it is ideal for panel mount applications requiring latched switch action.

S-7050ETA

Nidec Copal Electronics

The Nidec Copal Electronics S-7050ETA is a rotary coded switch with 16 positions and SP16T function. It features gold-plated contacts, copper alloy terminals, and stainless steel housing. With an electrical life of 10,000 cycles and operating temperatures from -40 to 85°C, it is ideal for applications requiring reliable binary coded switching in compact spaces.

A22NS-3MM-NBA-G110-NN

Omron

ROTARY SWITCH; Type (Actuator): ROTARY SHAFT; Contact Resistance: 100 mohm; Insulation Resistance: 100000000 ohm; Minimum Operating Temperature: -25 Cel; Color (Actuator): BLACK;

093121-5-02N

Grayhill

Grayhill 093121-5-02N is a rotary switch with 10000 cycles electrical life. Featuring a flat shaft actuator, it has gold terminal finish and wire termination. Ideal for panel mounting applications with a body height of 24.38mm.

A22NW-2BL-TRA-P002-RB

Omron

ROTARY SWITCH;

MRA112-CA

Nihon Kaiheiki Ind

ROTARY SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SP12T; Type (Actuator): SHAFT TYPE; AC Maximum Rating R Load (Contact): .25A@125VAC; JESD-609 Code: e4;

A6CV-10R

Omron

Omron A6CV-10R is a rotary coded switch with 10 positions, SP10T function, and 2000 cycles electrical life. It has IP64 sealing, operates b/w -20 to 70 °C, and withstands up to 250VAC. Ideal for applications requiring latched switch action in electronics or industrial control systems.