Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

LT1168CS8

Manufacturer

Linear Technology
Manufacturer's Part Number

LT1168CS8
Description

INSTRUMENTATION AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

Not In Stock

Popular Products

SMBJ18CA

Bourns

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

AB26TRB-32.768KHZ--T

Abracon

AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.

Details

SMBJ18CA

Yageo

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WS

Onsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LIS3DHTR

STMicroelectronics

LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.

Details

LM7805CT

Integrated Circuit Technology

Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;

Details

1N4148

Silicon Standard

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148

National Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

ERJ2RKF1002X

Panasonic

Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.

Details

BSS138

Changzhou Galaxy Century Microelectronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;

Details

LM358M

National Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

LM7805CT/NOPB

Texas Instruments

LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.

Details

BAV99

Good-ark Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SZNUP2105LT1G

Onsemi

SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.

Details

SMBJ18CA

STMicroelectronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Taiwan Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BAV99

Infineon Technologies

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ABS10-32.768KHZ-T

Abracon

Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.

Details

1N4148

First Components International

RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;

Details

BAT54SLT1G

Onsemi

BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.

Details

LT1168CS8 Technical Details

TYPE	DESCRIPTION
Package Body Material:	Plastic/Epoxy
Maximum Seated Height:	0.069 in (1.752 mm)
Nominal Bandwidth (3dB):	400 kHz
Maximum Supply Voltage Limit:	20 V
Sub-Category:	Instrumentation Amplifiers
Maximum Supply Current:	615 μA
Surface Mount:	Yes
Terminal Finish:	Tin Lead
No. of Terminals:	8
Maximum Input Offset Voltage:	80 µV
Terminal Position:	Dual
Package Style (Meter):	Small Outline
Technology:	Bipolar
JESD-30 Code:	R-PDSO-G8
Minimum Voltage Gain:	1
Package Shape:	Rectangular
Terminal Form:	Gull Wing
Maximum Operating Temperature:	70 °C (158 °F)
Package Code:	SOP
Amplifier Type:	Instrumentation Amplifier
Nominal Slow Rate:	0.48 V/us
Width:	0.154 in (3.899 mm)
Moisture Sensitivity Level (MSL):	1
Maximum Voltage Gain:	10000
Maximum Non Linearity:	0.008 %
Nominal Voltage Gain:	10
Nominal Negative Supply Voltage (Vsup):	-15 V
JESD-609 Code:	e0
Minimum Operating Temperature:	0 °C (32 °F)
Maximum Average Bias Current (IIB):	600 pA
No. of Functions:	1
Qualification:	No
Minimum Common Mode Reject Ratio:	83 dB
Package Equivalence Code:	SOP8,.25
Length:	0.193 in (4.9025 mm)
Nominal Supply Voltage / Vsup (V):	15 V
Maximum Negative Supply Voltage Limit:	-20 V
Terminal Pitch:	0.05 in (1.27 mm)
Maximum Input Offset Current (IIO):	550 pA
Temperature Grade:	Commercial
Power Supplies (V):	±15 V

Category Top Products

LT6370IDD#PBF

Analog Devices

LT6370IDD#PBF by Analog Devices is an instrumentation amplifier with 60uV max input offset voltage, 0.0008uA max average bias current, and 3.1MHz nominal bandwidth. Ideal for industrial applications requiring high precision amplification in a compact package with a wide temperature range.

LTC2053IMS8-SYNC

Linear Technology

INSTRUMENTATION AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;

PGA204AU/1KE4

Texas Instruments

PGA204AU/1KE4 by Texas Instruments is an instrumentation amplifier with 175uV max input offset voltage, 15V nominal voltage, and 1MHz nominal bandwidth. Ideal for industrial applications requiring precise signal amplification in a compact package.

INA126U/2K5

Texas Instruments

INA126U/2K5 by Texas Instruments is an instrumentation amplifier with 250uV max input offset voltage, 0.025uA max average bias current, and 15V nominal voltage. Ideal for industrial applications requiring high precision amplification in a compact package.

INA321E/2K5

Burr-Brown Corporation

INSTRUMENTATION AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

LTC2053IMS8

Linear Technology

INSTRUMENTATION AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;

PGA204BU/1KE4

Texas Instruments

PGA204BU/1KE4 by Texas Instruments is an instrumentation amplifier with 60uV max input offset voltage, 1MHz bandwidth, and 1000 max voltage gain. Ideal for industrial applications requiring precise signal amplification in a compact package.

AD626AR

Analog Devices

AD626AR by Analog Devices is an instrumentation amplifier with a max input offset voltage of 2500 uV and a nominal voltage of 5 V. It has a bandwidth of 0.1 MHz, making it suitable for industrial applications requiring precise signal amplification in tight spaces. With a compact rectangular package style and dual terminal position, this amplifier offers high performance in temperature ranges from -40 to 85 °C.

AD8221AR-REEL

Analog Devices

AD8221AR-REEL by Analog Devices is an instrumentation amplifier with 60uV max input offset voltage, 0.0015uA max average bias current, and 1000 max voltage gain. Ideal for industrial applications requiring precise signal amplification in a compact package with -40 to 85°C operating temperature range.

INA849DR

Texas Instruments

The Texas Instruments INA849DR is an instrumentation amplifier with a max input offset voltage of 35uV and a nominal voltage of 15V. With a max bandwidth of 28MHz, it is ideal for automotive applications requiring high precision amplification in compact spaces. The device features surface mount capability and operates within a wide temperature range from -40 to 125°C.

INA116UA

Texas Instruments

INA116UA by Texas Instruments is an instrumentation amplifier with a max input offset voltage of 5500uV and max supply current of 1.4mA. Ideal for industrial applications, it offers a nominal bandwidth of 0.8MHz and a min common mode reject ratio of 73dB in a small outline package style.

INA116UAG4

Texas Instruments

INA116UAG4 by Texas Instruments is an instrumentation amplifier with a max input offset voltage of 5500 uV and a max average bias current of 0.0000001 uA. It operates at a nominal voltage of 15 V, making it ideal for industrial applications requiring precise signal amplification in tight spaces. With a small outline package style and high voltage gain of 1000, this amplifier offers reliable performance in temperature-sensitive environments.

INA2126E/250G4

Texas Instruments

INA2126E/250G4 by Texas Instruments is a dual-function instrumentation amplifier with 16 terminals. It offers a max input offset voltage of 250uV and a nominal voltage of ±15V, making it suitable for industrial applications requiring precise signal amplification. With a bandwidth of 0.2MHz and high common mode rejection ratio of 80dB, this surface-mount amplifier is ideal for sensitive measurement tasks in harsh environments.

AD620SQ/883B

Analog Devices

AD620SQ/883B by Analog Devices is a MILITARY-grade INSTRUMENTATION AMPLIFIER with 1 MHz bandwidth, 10000 voltage gain, and 125 uV input offset voltage. Ideal for applications requiring precise signal amplification in harsh environments like aerospace or defense systems.

LTC6915HGN#TRPBF

Linear Technology

INSTRUMENTATION AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR;

AD622ARZ

Analog Devices

AD622ARZ by Analog Devices is an instrumentation amplifier with a max input offset voltage of 125uV, ideal for precision measurement applications. It operates at a nominal voltage of +-15V and offers a max voltage gain of 1000, making it suitable for industrial temperature grade environments. With surface mount capability and compact dimensions, this amplifier is versatile for various electronic designs.

RCV420JP

Texas Instruments

RCV420JP by Texas Instruments is an instrumentation amplifier with 1000uV max input offset voltage and 0.002% max nonlinearity. It operates at -22V to 22V supply range, ideal for precision signal conditioning in industrial automation and sensor applications. With a bandwidth of 0.15MHz, it offers high CMRR of 70dB for accurate measurements.

AD626BNZ

Analog Devices

AD626BNZ by Analog Devices is an instrumentation amplifier with 8 terminals, 5V nominal voltage, and 100 max voltage gain. It has a bandwidth of 0.1 MHz and is ideal for industrial applications requiring precise signal amplification in temperature-sensitive environments.

AD8422ACPZ-R7

Analog Devices

INSTRUMENTATION AMPLIFIER; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30;

AD620AR-REEL

Analog Devices

AD620AR-REEL by Analog Devices is an Instrumentation Amplifier with 150uV Max Input Offset Voltage, 1MHz Nominal Bandwidth, and 10000 Max Voltage Gain. Ideal for industrial applications requiring precise signal amplification in a compact package with a wide temperature range.