Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

LAH125-P

Manufacturer

Lem International Sa
Manufacturer's Part Number

LAH125-P
Description

CURRENT SENSOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 11; Output Type: CURRENT OUTPUT; Package Shape or Style: RECTANGULAR; Output Range: 0-125mA;
Datasheet

Datasheet

Not In Stock

Popular Products

BSS138

Weitron Technology

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;

Details

M39029/56-351

TE Connectivity

TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.

Details

ULN2803A

Vishay Intertechnology

NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;

Details

E8WSDC12-32.768KTR

Abracon

Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.

Details

1N4148

Diotec Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N7002

Inter F E T

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;

Details

2N2222A

Electronic Transistors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

LL4148

Diodes Incorporated

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LM358DR2G

Onsemi

LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.

Details

SMBJ18CA

Hy Electronic

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

USBLC6-2SC6

STMicroelectronics

USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.

Details

BAV99

Zetex Plc

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Asi Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

LL4148

Weitronic Enterprise

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

1N4148WT

Tak Cheong Electronics Holdings

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MMBT2222ALT1G

Onsemi

MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.

Details

1N4148

Microchip Technology

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N2222A

Secos

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;

Details

LM358AN

Signetics

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

2N2222A

Taitron Components

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;

Details

LAH125-P Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	11.4 V
Other Names:	LAH125-P Q4341307 90.34.36.000.0 LAH 125-P-ND LAH125P
Maximum Supply Voltage:	12.6 V
Output Range:	0-125mA
Output Type:	CURRENT OUTPUT
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	THROUGH HOLE MOUNT
Body Width:	14.93 inch
Sensors or Transducers Type:	CURRENT SENSOR
No. of Terminals:	11
Package Shape or Style:	RECTANGULAR
Body Height:	27.2 mm
Body Length/Diameter:	47.9 mm
Maximum Operating Temperature:	85 Cel

Category Top Products

ACS780LLRTR-100B-T

Allegro MicroSystems

Allegro MicroSystems' ACS780LLRTR-100B-T is a current sensor with 7 terminals, operating from -40 to 150°C. It provides analog voltage output at a max supply voltage of 5.5V and min of 4.5V. This rectangular surface-mount sensor in plastic/epoxy package is ideal for automotive applications due to AEC-Q100 screening level compliance.

997

Amphenol

Other Sensors/Transducers;

HX10-P

Lem International Sa

HX10-P by Lem International Sa is a current sensor with 6 terminals, outputting -4-4V analog voltage. It operates b/w -25 to 85°C, suitable for applications requiring precise current measurement in a compact package. With plastic housing and through-hole mounting feature, it offers reliable performance at supply voltages ranging from 14.25 to 15.75V.

LIS2DH

STMicroelectronics

LIS2DH by STMicroelectronics is a 3-axis accelerometer with digital output voltage range of 0.18-1.62V, suitable for applications requiring motion sensing and orientation detection. It operates b/w -40 to 85°C temperature range, with a supply voltage range of 1.71-3.6V, making it ideal for various IoT and wearable devices due to its small form factor (2x2mm) and surface mount feature.

154N-300G-R

Ic Sensors

Other Sensors/Transducers;

CSNK591

Honeywell Sensing And Control

Other Sensors/Transducers;

SGP30-2.5K

Sensirion Ag

SGP30-2.5K by Sensirion Ag is a gas sensor with a max supply voltage of 1.98V and a min operating temperature of -40°C. It has an output type of digital voltage and is commonly used in applications such as air quality monitoring and indoor air purification systems.

11026911-00

TE Connectivity

VIBRATION SENSOR;

L32P150S05FS

Tamura

Other Sensors/Transducers;

LTR-308ALS-01

Lite-on Technology

The Lite-on Technology LTR-308ALS-01 is an ambient light sensor with a 3.6V max supply voltage, 10% accuracy, and digital voltage output. It operates b/w -40°C to 85°C, suitable for various applications like automatic brightness adjustment in displays or IoT devices. With a compact body size of 2" width and 0.7mm height, it features a surface mounting feature for easy installation.

AWM3100V

Honeywell Sensing And Control

MASS AIR FLOW SENSOR;

LESR25-NP

Lem International Sa

LESR25-NP by Lem International Sa is a CURRENT SENSOR with 14 terminals, outputting voltage in the range of 0.25-4.75V. It operates b/w -40 to 105°C, suitable for board mounting applications due to its rectangular shape measuring 21.91x13.4x20.3 mm (LxWxH) and can be powered within the range of 4.75-5.25V.

ACS71240LLCBTR-050U5

Allegro MicroSystems

ACS71240LLCBTR-050U5 by Allegro MicroSystems is a current sensor with voltage output. It operates b/w -40 to 150°C, suitable for automotive applications (AEC-Q100). With 8 terminals and 4.5-5.5V supply range, it's a surface-mount sensor in a plastic/epoxy package.

AT42QT2120-MMHR

Microchip Technology

AT42QT2120-MMHR by Microchip is a capacitive touch sensor with 20 terminals, operating voltage range of 1.8V to 5.5V, and digital output type. It has a compact square package design measuring 3mm x 3mm x 0.78mm, suitable for surface mount applications in various electronic devices like consumer electronics and industrial control systems. Operating temperature ranges from -40°C to 85°C, providing reliable touch sensing capabilities in diverse environments.

HAS50-S

Lem International Sa

HAS50-S by Lem International Sa is a CURRENT SENSOR with 14.25-15.75 V supply voltage range and -10 to 80°C operating temperature. It offers -4-4V analog output, ideal for applications requiring precise current measurement in a compact 20x40x30 mm plastic housing.

3.000.521

Sensirion Ag

GAS SENSOR;

AWM43300V

Honeywell Sensing And Control

Honeywell Sensing And Control AWM43300V is a MASS AIR FLOW SENSOR with 3 terminals, operating voltage range of 8-15 V. It offers analog voltage output, suitable for applications requiring precise airflow measurement in temperatures ranging from -25 to 85°C. The sensor's rectangular shape and through-hole mounting feature make it versatile for various industrial uses.

ATS668LSMTN-T

Allegro MicroSystems

ATS668LSMTN-T by Allegro MicroSystems is a gear tooth sensor with 3 terminals, digital current output of 25-70mA, and BICMOS technology. It operates b/w -40 to 150°C, has a supply voltage range of 4.6-24V, and max output current of 70A. Ideal for applications requiring precise sensing in harsh environments.

TMCS1108A3BQDR

Texas Instruments

TMCS1108A3BQDR by Texas Instruments is a current sensor with 8 terminals, operating voltage range of 3-5V, and outputting analog voltage. It has a compact rectangular package suitable for surface mount applications. Ideal for monitoring current in various electronic systems within -40 to 85°C temperature range.

ACS37002KMABTR-050B5

Allegro MicroSystems

CURRENT SENSOR; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3;