Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

221612

Manufacturer

Lapp Group Pvt
Manufacturer's Part Number

221612
Description

WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Minimum Operating Temperature: -25 Cel; Diameter: 14.4 mm; Cross Section Area: 1.5 mm2;
Datasheet

Datasheet

Not In Stock

Popular Products

2N7002

Siliconix

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;

Details

1N4148WS

Continental Device India

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138-TP

Micro Commercial Components

BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.

Details

FT232RQ-REEL

FTDI

FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.

Details

SS495A-SP

Honeywell Sensing And Control

SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.

Details

1N5819HW-7-F

SPC TECHNOLOGY/ MULTICOMP

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

CRCW06031K00FKEAHP

Vishay Intertechnology

Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.

Details

261

Mercury Systems

Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;

Details

1N4148

Silicon Standard

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BAV99

Bkc Semiconductors

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Shandong Yiguang Electronic Joint Stock

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

DS18B20Z+

Analog Devices

DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.

Details

NE555/D

General Electric Solid State

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;

Details

2N2222A

Silicon Transistor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

M24308/2-1F

TE Connectivity

TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.

Details

2N7002

Telcom Semiconductor

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;

Details

IRLML6401TRPBF

Infineon Technologies

IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.

Details

ULN2803A

Sanken Electric

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;

Details

BAV99

Lite-on Technology

RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;

Details

2N7002

Samsung

N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;

Details

221612 Technical Details

TYPE	DESCRIPTION
Wire Gauge (AWG):	16
Construction:	STRANDED
Jacket Material:	POLYVINYL CHLORIDE
Approvals (V):	CE; CSA; CUL; MSHA; UL
Shielding:	NO
Minimum Operating Temperature:	-25 Cel
Rated Voltage:	600 V
Cross Section Area:	1.5 mm2
Resistance:	888 ohm
Wire & Cable Name:	FLEXIBLE CORD AND FIXTURE WIRE
Connector Accessory Type:	WIRE AND CABLE
Insulator Material:	PVC/NYLON
No. of Conductors:	12
Additional Features:	VNTC CABLES
Conductor Material:	BARE COPPER
Maximum Operating Temperature:	90 Cel
Application:	INDUSTRIAL PLANT EXPANSIONS, AUTOMOTIVE PLANTS, TRAY WIRING
Diameter:	14.4 mm

Category Top Products

44A0111-26-0-US

TE Connectivity

TE Connectivity's 44A0111-26-0-US is a 600V rated wire with TIN finish, suitable for -65 to 150°C. Featuring 26 AWG copper alloy conductor, it is ideal for flexible cord and fixture wire applications.

982670233

Molex

CABLE ASSEMBLY; Shielding: NO; No. of Conductors: 8;

M22759/16-22-9

Carlisle Interconnect Technologies

M22759/16-22-9 by Carlisle IT is a MIL-approved stranded wire with 600V rating, featuring tin finish and ETFE insulation. Ideal for aerospace applications, it operates b/w -55°C to 150°C, with 22 AWG copper conductor and resistance of 0.053 ohm.

55A0111-22-0

TE Connectivity

TE Connectivity's 55A0111-22-0 is a stranded electrical wire with a rated voltage of 600V and max operating temperature of 150°C. It is constructed with tin-finished copper alloy conductor and has a wire gauge of 22 AWG. This flexible cord and fixture wire is commonly used in applications requiring CSA, CAA, MIL, and UL approvals.

887689810

Molex

Molex 887689810 cable features UL approval, shielding, and 28 AWG wire gauge. With HDMI male connectors on both sides, it is ideal for high-definition audio/video applications requiring reliable signal transmission over a length of 1.93 mm.

M22759/43-22-9

TE Connectivity

TE Connectivity's M22759/43-22-9 wire is MIL approved with 600V rating, featuring silver finish copper alloy conductor and radiation-crosslinked modified ETFE insulation. With a temperature range of -65 to 200°C, it's ideal for flexible cord and fixture wire applications.

6XV1830-0EH10

Siemens

Siemens 6XV1830-0EH10 cable is a stranded PVC wire with CE, CUL, ETL, UL approvals. It features tin finish copper conductors, PE insulation, and shielding for 100V applications. Ideal for fast installations in temperatures ranging from -40 to 75°C.

FFSD-05-D-02.50-01-N

Samtec

Samtec's FFSD-05-D-02.50-01-N is a UL approved flat cable with 10 conductors, TIN finish, and PVC insulation. Featuring 30 AWG wire gauge, it has a cross section area of 0.051 mm2 and can handle up to 2.3A current. Ideal for applications requiring a temperature range from -40°C to 105°C.

VHA00009-2M

Infinite Electronics International

CABLE ASSEMBLY;

107-3

Standard Wire & Cable

Standard Wire & Cable 107-3 is a MIL-approved electrical wire with stranded construction, nylon jacket, and tin finish. It has a rated voltage of 600V, insulator made of PVC, and operates up to 105°C. Ideal for flexible cord and fixture wire applications due to its copper conductor material and resistance of 0.02 ohm.

3365/16

3m Electronic Products Division

3365/16 by 3M Electronic Products Division is a UL-approved FLAT FLEXIBLE CABLE with 16 conductors of TINNED COPPER. Featuring STRANDED construction, it has a wire gauge of 28 AWG and can operate b/w -20 to 105 °C. Ideal for electrical applications requiring flexibility and durability in confined spaces.

095FJZFJZAHM500

Amphenol

CABLE ASSEMBLY;

M22759/16-20-9

Super-temp Wire & Cable

WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Insulator Material: EXTRUDED ETFE; Conductor Material: COPPER; Maximum Operating Temperature: 150 Cel;

135110-02-M0.25

Amphenol

CABLE ASSEMBLY;

U038-006

Tripp Lite

CABLE ASSEMBLY;

FFSD-08-D-08.00-01-N

Samtec

Samtec's FFSD-08-D-08.00-01-N is a UL-approved stranded cable with tin finish, PVC insulation, and 30 AWG wire gauge. Ideal for high reliability applications, it has a temperature range of -40 to 105°C, 7X38 stranding, and rated current of 2.3A across its 16 conductors.

7919A0101000

Belden

Wires and Cables;

5010/60CBK199

Alpha Wire

Alpha Wire 5010/60CBK199 is a stranded wire with PVC jacket, rated for 300V. Featuring tin finish copper alloy conductor, it operates b/w -35 to 105°C. Ideal for flexible cord and fixture wire applications due to its 7X30 stranding and 0.326 mm2 cross section area.

IDSD-20-D-06.00-T

Samtec

IDSD-20-D-06.00-T by Samtec is a 425V rated flat cable with 40 conductors, each made of copper alloy and tin finish. Featuring PVC insulation, it has a max operating temp of 105°C and is stranded in a 7X28 configuration. Ideal for applications requiring high flexibility and durability in electrical connections.

18615

Helukabel

WIRE AND CABLE; Rated Voltage: 450 V; Shielding: NO; Wire Gauge (AWG): 12; Jacket Material: POLYURETHANE; Construction: STRANDED;