Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

C0805C103K1RACTU

Manufacturer

KEMET Corporation
Manufacturer's Part Number

C0805C103K1RACTU
Description

CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .01 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
Datasheet

Datasheet

Not In Stock

Popular Products

SMMBT3904LT1G

Onsemi

SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.

Details

MBRS360T3G

Onsemi

MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.

Details

ABS07-32.768KHZ-T

Abracon

Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.

Details

E8WSDC12-32.768KTR

Abracon

Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.

Details

LL4148

Vishay Intertechnology

Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.

Details

SN65HVD234DR

Texas Instruments

SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.

Details

BSS84PH6327XTSA2

Infineon Technologies

BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.

Details

LL4148

International Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

USB3320C-EZK-TR

Standard Microsystems

INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;

Details

NDT2955

Fairchild Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;

Details

2N7002

STMicroelectronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;

Details

C0603X104K5RACAUTO

KEMET Corporation

C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.

Details

NC7WZ07P6X

Onsemi

The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.

Details

LM107H

Raytheon Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;

Details

BAV99

ROHM

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002

Telcom Semiconductor

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;

Details

LM317T/NOPB

National Semiconductor

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;

Details

2N2222A

Baneasa S A

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;

Details

BSS138PS,115

Nexperia

N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;

Details

BAV99LT1G

Onsemi

BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.

Details

C0805C103K1RACTU Technical Details

TYPE	DESCRIPTION
Capacitor Type:	CERAMIC CAPACITOR
Dielectric Material:	CERAMIC
Multi-layer:	Yes
Packing Method:	TR, PAPER, 7 INCH
Size Code:	0805
Terminal Finish:	MATTE TIN OVER NICKEL
JESD-609 Code:	e3
Minimum Operating Temperature:	-55 Cel
Mounting Feature:	SURFACE MOUNT
No. of Terminals:	2
Temperature Coef (ppm/Cel):	15%
Package Style (Meter):	SMT
Length:	2 mm
Terminal Shape:	WRAPAROUND
Positive Tolerance:	10 %
Package Shape:	RECTANGULAR PACKAGE
Capacitance:	.01 uF
Negative Tolerance:	10 %
Temperature Characteristics Code:	X7R
Maximum Operating Temperature:	125 Cel
Height:	.78 mm
Rated DC Voltage (URdc):	100 V
Width:	1.25 mm

Category Top Products

0603B104K500CT

Walsin Technology

0603B104K500CT by Walsin Technology is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it suitable for surface mount applications in various electronic devices.

C0805C225K4RACTU

KEMET Corporation

KEMET C0805C225K4RACTU is a ceramic capacitor with 2.2uF capacitance and 16V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring reliable multi-layer capacitors.

CC0402KRX7R9BB103

Yageo

Yageo CC0402KRX7R9BB103 is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for applications requiring compact fixed capacitors in electronics for reliable performance.

M39006/25-0236

Defense Logistics Agency

TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 60 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);

CC0603KRX7R9BB105

Yageo

Yageo CC0603KRX7R9BB105 is a ceramic capacitor with 1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.

EEHZA1H220P

Panasonic

Panasonic EEHZA1H220P is a 22uF aluminum electrolytic capacitor with 50V rated DC voltage. It features low ESR of 80mohm, suitable for AEC-Q200 automotive applications. With compact SMT package style and high ripple current of 110mA, it's ideal for surface mount PCB designs in harsh environments.

VJ1206Y104KXACW1BC

Vishay Intertechnology

Vishay Intertechnology's VJ1206Y104KXACW1BC is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and operates b/w -55°C to 125°C, making it suitable for various applications requiring stable performance in a compact SMT package.

440LS10-R

Vishay Intertechnology

Vishay Intertechnology's 440LS10-R is a ceramic capacitor with 0.01 uF capacitance, rated at 760 V AC. It has a temperature coefficient of -56/+22% and operates b/w -30 to 125 °C. Ideal for applications requiring fixed capacitors in bulk packaging with radial terminal style.

12065C104KAT2A

KYOCERA AVX

12065C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its compact size of 3.2mm x 1.6mm x 0.94mm and wraparound terminals.

0805B104K500CT

Knowles Precision Devices

CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .1 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;

C5750X6S2W225K250KA

TDK

C5750X6S2W225K250KA by TDK is a ceramic capacitor with 2.2uF capacitance and 450V rated DC voltage. It has X6S temperature characteristics, -55 to 105 °C operating range, and 10% tolerance. Ideal for surface mount applications in electronics requiring high reliability and performance.

C1608X5R0J226M080AC

TDK

C1608X5R0J226M080AC by TDK is a ceramic capacitor with 22uF capacitance and 6.3V rated DC voltage. Featuring X5R temperature characteristics, it operates b/w -55 to 85°C, making it ideal for SMT applications requiring compact size and high reliability. With a negative tolerance of 20%, this multi-layer capacitor is suitable for various electronic devices.

C0603C104J3RACTU

KEMET Corporation

KEMET C0603C104J3RACTU is a ceramic capacitor with capacitance of 0.1uF, rated at 25V. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for surface mount applications due to its compact size and multi-layer design.

C0603C470J5GACTU

KEMET Corporation

KEMET Corporation's C0603C470J5GACTU is a ceramic capacitor with 0.000047 uF capacitance and 50V URdc. It has a temperature coefficient of 30ppm/°C, suitable for applications requiring stable performance over -55 to 125 °C temperatures. With SMT package style and wraparound terminals, it is ideal for compact surface mount designs in various electronic devices.

CGA2B3X7R1H104K050BB

TDK

The TDK CGA2B3X7R1H104K050BB is a ceramic capacitor with capacitance of 0.1uF, rated for 50V DC voltage. It has X7R temperature characteristics and operates b/w -55°C to 125°C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.

GCM188R71C105KA64D

Murata Manufacturing

Murata Manufacturing's GCM188R71C105KA64D is a 0603 SMT ceramic capacitor with 1uF capacitance, X7R temperature characteristics, and 16V rated DC voltage. It is ideal for automotive applications due to AEC-Q200 standard compliance and -55 to 125 °C operating temperature range.

M39006/22-0377

Vishay Intertechnology

Vishay Intertechnology's M39006/22-0377 is a TANTALUM CAPACITOR with 68uF capacitance, 60V URdc, and 0.13 Tan Delta. Ideal for MIL-PRF-39006/22 applications requiring high ripple current (368.55mA) and low leakage current (0.002mA).

C0603C106M9PACTU

KEMET Corporation

KEMET C0603C106M9PACTU is a 10uF ceramic capacitor with 6.3V URdc, X5R temp characteristics, and 20% tolerance. Ideal for SMT applications in electronics due to compact 1.6x0.8mm size and -55 to 85°C operating range. Suitable for various devices requiring stable capacitance under changing conditions.

MC0402B103K250CT

Multicomp Pro

MC0402B103K250CT by Multicomp Pro is a ceramic capacitor with 10% negative tolerance, X7R temperature characteristics, and 0.01 uF capacitance. Ideal for surface mount applications in electronics due to its compact size and 25V rated DC voltage.

04025C102KAT2A

KYOCERA AVX

04025C102KAT2A by KYOCERA AVX is a ceramic capacitor with 0.001uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its compact size of 1x0.5x0.56mm and wraparound terminals.