Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

S4B-PH-SM4-TB(LF)(SN)

Manufacturer

J S T Mfg
Manufacturer's Part Number

S4B-PH-SM4-TB(LF)(SN)
Description

BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body Length: .468 inch; IEC Conformity: NO; No. of PCB Rows: 1;
Datasheet

Datasheet

Not In Stock

Popular Products

FT232RL-REEL

FTDI

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

Details

CRCW06031K00FKEAHP

Vishay Intertechnology

Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.

Details

LM2931AZ-5.0RPG

Onsemi

LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.

Details

LL4148

Temic Semiconductors

RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BSS138

Jiangsu Changjiang Electronics Technology

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): .22 A; Package Shape: RECTANGULAR;

Details

1N4148

Philips Semiconductors

RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;

Details

SMBJ18CA

International Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;

Details

1N4148WS

Taiwan Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Bkc Semiconductors

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Fairchild Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM2675M-ADJ/NOPB

Texas Instruments

LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.

Details

CC0603KRX7R9BB104

Yageo

Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.

Details

SS14

Silicon Standard

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

EEAGA1H4R7

Panasonic

Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.

Details

EPCS4SI8N

Altera

CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;

Details

DS18B20+

Maxim Integrated

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;

Details

LM317LMX/NOPB

National Semiconductor

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;

Details

2N7002

Telcom Semiconductor

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;

Details

M39029/56351

Souriau-sunbank Connection Technologies

Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.

Details

LM555CN

Texas Instruments

LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.

Details

S4B-PH-SM4-TB(LF)(SN) Technical Details

TYPE	DESCRIPTION
Mating Contact Finish:	TIN OVER COPPER
Mating Info.:	MULTIPLE MATING PARTS AVAILABLE
IEC Conformity:	NO
MIL Conformity:	NO
No. of Rows Loaded:	1
Termination Type:	SURFACE MOUNT
Body Length:	.468 inch
Contact Gender:	MALE
Connector Type:	BOARD CONNECTOR
Contact Material:	COPPER ALLOY
UL Flammability Code:	94V-0
Mounting Style:	RIGHT ANGLE
Mixed Contacts:	NO
Contact Style:	SQ PIN-SKT
Filter Feature:	NO
No. of PCB Rows:	1
Mounting Type:	BOARD
JESD-609 Code:	e2
Body Depth:	.299 inch
Total No. of Contacts:	4
Body Width:	.216 inch
Terminal Pitch (mm):	2
Termination Contact Finish:	TIN COPPER
Insulator Material:	POLYAMIDE6T
Additional Features:	SIDE ENTRY
Option:	GENERAL PURPOSE
Contact Pattern:	RECTANGULAR
Mating Contact Pitch (inch):	0.079
DIN Conformance:	NO

Category Top Products

52271-1669

Molex

Molex 52271-1669 is a FFC/FPC connector with 16 contacts, mating pitch of 0.039", and body width of 0.118". It features TIN over nickel termination finish, polyamide insulator, and UL94V-0 flammability rating. Ideal for board mounting applications requiring surface mount termination in commercial settings.

50-37-5023

Molex

The Molex 50-37-5023 is a board connector with a mating contact pitch of 0.098". It features an insulation resistance of 1G ohm and can withstand up to 1000VAC. This dual-polarized connector, suitable for commercial applications, has a rated current of 3A and operates b/w -40°C to 105°C.

65823-220LF

Amphenol Communications Solutions

Amphenol's 65823-220LF is a 20-contact board connector with nickel palladium gold finish. Featuring 2 rows, it has a terminal pitch of 2.54mm and UL94V-0 flammability rating. Ideal for applications requiring right-angle mounting in headers & edge type connectors.

74441-0010

Molex

Molex 74441-0010 is a board connector with 20 contacts, 0.031" mating pitch, and 0.433" body length. Ideal for commercial applications, it has a matte tin finish, operates b/w -40 to 85°C, and features a glass-filled polyethylene insulator.

61301011121

Wuerth Elektronik & Kg

61301011121 by Wurth Elektronik is a board connector with 10 contacts, rated at 3A signal current. Featuring gold over nickel termination finish, it has a mating contact pitch of 0.1", insulation resistance of 1Gohm, and operates b/w -40 to 125°C. Ideal for commercial applications requiring reliable connections on PCBs.

1-640456-5

Tyco Electronics Amp

BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: STRAIGHT; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; No. of Rows Loaded: 1;

B4PS-VH(LF)(SN)

J S T Mfg

B4PS-VH(LF)(SN) by J S T Mfg is a 4-contact board connector with a mating contact pitch of 0.156 inches. It has a body length of 0.621 inch and insulation resistance of 1,000,000,000 ohms. This connector is commonly used in applications requiring a right angle mounting style and solder termination type.

ZHR-8

J S T Mfg

ZHR-8 by J S T Mfg is a board connector with 8 contacts, 0.059" pitch, and 500VAC dielectric voltage. It is ideal for applications requiring a polarized housing, such as cable mounting with crimp termination. With a temperature range of -25 to 85°C, it offers reliable performance in various environments.

FTSH-105-01-L-DV-K-TR

Samtec

Samtec's FTSH-105-01-L-DV-K-TR is a 2-row, 10-contact board connector with a contact pitch of 0.05". Featuring TIN over nickel finish, it operates b/w -55°C to 125°C. Ideal for commercial applications requiring reliable male connectors in black insulator material.

306-022-520-102

Edac

Edac 306-022-520-102 is a 22-contact card edge connector with 0.156" pitch, rated at 5A power. With POLYETHYLENE POLYESTER insulator and UL94V-0 flammability, it operates b/w -40 to 105°C. Ideal for board mounting applications requiring high insulation resistance and dielectric voltage withstand capabilities.

FTSH-105-01-L-DV-K-P-FR

Samtec

The Samtec FTSH-105-01-L-DV-K-P-FR is a 2-row, 10-contact male board connector with tin finish. It has a terminal pitch of 1.27mm and UL94V-0 flammability rating. Ideal for surface mount applications requiring straight mounting style.

330-10-122-00-240000

Mill-max Mfg

330-10-122-00-240000 by Mill-max Mfg is a BOARD CONNECTOR with 22 contacts, SOLDER termination, and MALE gender. It is used for CABLE mounting in STRAIGHT style applications.

DM3CS-SF

Hirose Electric

The Hirose Electric DM3CS-SF is a card edge connector with 0.043" mating contact pitch, 500VAC dielectric voltage, and 1000000000 ohm insulation resistance. Ideal for board mounting applications in commercial settings, featuring male compression contacts and a surface mount termination type.

8-5353189-0

TE Connectivity

TE Connectivity 8-5353189-0 is a board stacking connector with 140 contacts, 2 rows, and 0.024" mating pitch. Ideal for commercial applications, it features a 200VAC dielectric voltage rating and polyethylene insulation material. Operating b/w -40°C to 85°C, this female connector offers durability with a 50-cycle lifespan.

DF11-10DP-2DS(24)

Hirose Electric

DF11-10DP-2DS(24) by Hirose Electric is a 10-contact board connector with 0.079" pitch, suitable for PCB applications. It features a dielectric voltage of 650VAC, insulation resistance of 1Gohm, and operates b/w -30 to 85°C. Ideal for commercial use, it offers durability of 30 cycles and solder termination type.

2199230-4

TE Connectivity

TE Connectivity 2199230-4 is a CARD EDGE CONNECTOR with POLYETHYLENE insulator. It has 67 contacts, 0.02" pitch, and operates b/w -40 to 80°C. Ideal for board mounting applications requiring FEMALE compression contacts in a RIGHT ANGLE configuration.

52271-1679

Molex

The Molex 52271-1679 is a FFC/FPC connector with 16 contacts, rated at 0.5A signal current. It has a mating contact pitch of 0.039", insulation resistance of 100M ohm, and dielectric voltage rating of 750VAC. Ideal for board mounting applications, it features a polyamide insulator material and operates b/w -40 to 85°C temperature range.

1658621-1

Tyco Electronics Amp

BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; UL Flammability Code: 94V-0; Mating Contact Finish: GOLD (15) OVER NICKEL (50)/GOLD FLASH (15) OVER PALLADIUM NICKEL (15); Filter Feature: NO;

ZHR-6

J S T Mfg

ZHR-6 by J S T Mfg is a 6-contact board connector with 0.059" pitch, suitable for applications requiring a polarized housing and crimp termination. With insulation resistance of 500M ohm and operating temperature range from -25 to 85°C, it offers reliable performance in various electronic setups. The UL-certified connector features a female contact gender and rectangular contact pattern, making it ideal for cable mounting scenarios.

35572-0300

Molex

Molex 35572-0300 is a board connector with 3 contacts, 0.098" pitch, and 1000VAC voltage rating. Ideal for commercial applications, it features tin finish contacts, operates b/w -40 to 105°C temperatures, and has UL94V-0 flammability rating.