Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

BM03B-GHS-TBT(LF)(SN)(N)

Manufacturer

J S T Mfg
Manufacturer's Part Number

BM03B-GHS-TBT(LF)(SN)(N)
Description

BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Rows Loaded: 1; Mounting Style: STRAIGHT; Mating Contact Finish: TIN;
Datasheet

Datasheet

Not In Stock

Popular Products

2N7002

Yangzhou Yangjie Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;

Details

1N4148

Vicor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N7002

Micro Commercial Components

Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;

Details

OPA2227UA

Texas Instruments

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

Details

2N2222A

SPC TECHNOLOGY/ MULTICOMP

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

USB3320C-EZK-TR

Microchip Technology

Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.

Details

LL4148

Transys Electronics

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

2N7002

Telcom Semiconductor

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;

Details

LD1117S33TR

STMicroelectronics

LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.

Details

1N4148

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM7805CT

Integrated Circuit Technology

Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;

Details

NDT2955

National Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;

Details

1N4148WS

Diodes Incorporated

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM7805CT/NOPB

National Semiconductor

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;

Details

C0805C104K5RACTU

KEMET Corporation

KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.

Details

1N4148

Diodes Incorporated

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148WS

Continental Device India

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Ksl Microdevices

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

RC0603FR-071KL

Yageo

Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.

Details

MBRS130LT3G

Rochester Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BM03B-GHS-TBT(LF)(SN)(N) Technical Details

TYPE	DESCRIPTION
Mounting Style:	STRAIGHT
Mixed Contacts:	NO
Mating Contact Finish:	TIN
Filter Feature:	NO
Mating Info.:	MULTIPLE MATING PARTS AVAILABLE
IEC Conformity:	NO
Mounting Type:	BOARD
JESD-609 Code:	e3
Total No. of Contacts:	3
Terminal Pitch (mm):	1.25
MIL Conformity:	NO
No. of Rows Loaded:	1
Termination Type:	SURFACE MOUNT
Termination Contact Finish:	Tin (Sn)
Contact Gender:	MALE
Connector Type:	BOARD CONNECTOR
Contact Material:	PHOSPHOR BRONZE
Option:	GENERAL PURPOSE
DIN Conformance:	NO
UL Flammability Code:	94V-0

Category Top Products

VHR-5N-BK

J S T Mfg

VHR-5N-BK by J S T Mfg is a 5-contact female board connector with a mating contact pitch of 0.156". Featuring POLYAMIDE insulation, it has an operating temperature range of -25 to 85 °C and offers high insulation resistance at 1G ohm. Ideal for commercial applications requiring reliable connections in black housings.

826634-3

TE Connectivity

TE Connectivity 826634-3 is a 2-row board connector with 0.1" contact pitch, suitable for commercial applications. With insulation resistance of 5G ohm and operating temperature range from -65 to 105°C, it features POLYBUTYLENE TEREPHTHALATE insulator material. Ideal for PCB mounting with right-angle plug style, rated at 5A signal current.

50-37-5023

Molex

The Molex 50-37-5023 is a board connector with a mating contact pitch of 0.098". It features an insulation resistance of 1G ohm and can withstand up to 1000VAC. This dual-polarized connector, suitable for commercial applications, has a rated current of 3A and operates b/w -40°C to 105°C.

746-016-520-606

Edac

Edac 746-016-520-606 is a 16-contact card edge connector with 0.125" pitch, suitable for PCB mounting. Featuring 3A signal current rating, it has a dielectric voltage of 1500VAC and operates b/w -40 to 105°C. Ideal for applications requiring high insulation resistance and UL94V-0 flammability compliance.

52610-3072

Molex

The Molex 52610-3072 FFC/FPC connector features a mating contact pitch of 0.039", insulation resistance of 100M ohm, and dielectric voltage rating of 700VAC. Ideal for board mounting applications, this female connector has a total of 30 contacts, staggered PCB pattern, and surface mount termination type.

M50-3600542P

Harwin Plc

M50-3600542P by Harwin Plc is a 10-contact, surface mount board connector with a terminal pitch of 1.27mm. It features tin contact finish with a nickel barrier and is suitable for applications requiring UL flammability code 94V-0 compliance.

USL00-30L-A

Kel

The Kel USL00-30L-A is a 30-contact board connector with a mating contact pitch of 0.016". It features an insulation resistance of 100M ohm and can withstand up to 200VAC. Ideal for commercial applications, this right-angle receptacle has a surface mount termination type and operates b/w -40°C to 85°C.

B04B-PASK-1(LF)(SN)

J S T Mfg

B04B-PASK-1(LF)(SN) by J S T Mfg is a 4-contact board connector with 0.079" pitch, suitable for applications requiring a max operating temperature of 85°C. Featuring tin finish contacts and UL-rated insulation material, it offers high insulation resistance of 1000000000 ohm and dielectric voltage withstand of 800VAC. Ideal for PCB mounting with solder termination, this male connector has a contact resistance of 20 mohm and can handle up to 3A signal current.

22-29-2061

Molex

The Molex 22-29-2061 is a board connector with 6 contacts, featuring a mating contact pitch of 0.1", insulation resistance of 1000000000 ohm, and rated current of 4A. It has a body length of 0.6", body width of 0.23", and operates b/w temperatures of 0 to 75°C. This connector is ideal for applications requiring reliable signal transmission on PCBs in commercial settings.

22-05-7025

Molex

The Molex 22-05-7025 is a board connector with 0.098" mating contact pitch, suitable for headers & edge type connectors. Featuring a 1400VAC dielectric voltage, it has a temperature range of -40 to 105°C and offers high durability with 30 cycles. Ideal for commercial applications requiring reliable signal transmission at 3A current rating.

BM06B-SRSS-TB(LF)(SN)

J S T Mfg

BM06B-SRSS-TB(LF)(SN) by J S T Mfg is a 6-contact BOARD CONNECTOR with 0.039" pitch, 100M ohm insulation resistance, and 500VAC dielectric voltage. Ideal for PCB applications requiring male SQ PIN-SKT contacts in a polarized housing with surface mount termination.

10067847-001RLF

Amphenol Communications Solutions

Amphenol's 10067847-001RLF is a PCB connector with 11 contacts, rated at 0.5A signal current. Featuring a mating contact pitch of 0.066", it offers high insulation resistance of 1Gohm and operates b/w -40°C to 105°C. Ideal for board mounting applications, this durable connector has a plating thickness of 50u and meets UL standards.

1-2199119-5

TE Connectivity

TE Connectivity 1-2199119-5 is a card edge connector with 67 contacts, rated at 0.5A. It has a mating contact pitch of 0.019", operates b/w -40 to 80°C, and features a polarized design for secure connections. Ideal for board mounting applications requiring high reliability and signal integrity.

746-018-520-606

Edac

Edac 746-018-520-606 is a 2-row card edge connector with 18 contacts. It has a mating contact pitch of 0.125", insulation resistance of 5Gohm, and can handle up to 3A signal current. Ideal for PCB applications requiring high reliability in temperatures ranging from -40°C to 105°C.

357-074-422-268

Edac

Edac 357-074-422-268 is a 74-contact card edge connector with 0.156" pitch, suitable for PCBs with 5A signal current. Featuring a dielectric voltage of 2545VAC and insulation resistance of 5000000000 ohm, it operates b/w -40°C to +105°C. Ideal for applications requiring high reliability and durability in electronic connections.

7-188275-6

TE Connectivity

TE Connectivity 7-188275-6 is a FFC/FPC connector with 0.05" mating contact pitch, 100 V rated voltage, and -40 to 105 °C operating temperature range. It has POLYAMIDE46 insulator material and is ideal for board mounting applications requiring high insulation resistance and low contact resistance.

S2B-ZR-SM4A-TF(LF)(SN)

J S T Mfg

S2B-ZR-SM4A-TF(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.059" pitch, 500VAC Dielectric Withstanding Voltage, and -25 to 85 °C operating range. Ideal for applications requiring POLARIZED HOUSING, RECTANGULAR PCB Contact Pattern, and SURFACE MOUNT Termination Type.

70553-0004

Molex

Molex 70553-0004 is a board connector with 0.1" pitch, ideal for commercial applications. Features TIN over nickel finish, UL94V-0 rated black polycarbonate insulator, and 15u plating thickness. Suitable for right-angle mounting on PCBs with rectangular contact pattern.

22-01-3027

Molex

Molex 22-01-3027 is a board connector with 0.1" pitch, suitable for headers & edge type connectors. Featuring POLYAMIDE insulator, it offers 700VAC dielectric voltage and operates b/w -40 to 105°C. With a removable contact block design, it has a durability of 25 cycles and supports up to 4A signal current.

DF40C-100DS-0.4V

Hirose Electric

DF40C-100DS-0.4V by Hirose Electric is a 2-row stacking connector with 100 contacts, gold termination, and liquid crystal polymer insulator. It has a mating contact pitch of 0.016", dielectric voltage of 100VAC, and operates b/w -35 to 85°C. Ideal for board applications requiring durability, reliability, and signal current rating of 0.3A.