Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

B2P3-VH(LF)(SN)

Manufacturer

J S T Mfg
Manufacturer's Part Number

B2P3-VH(LF)(SN)
Description

RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Style: SQ PIN-SKT; Termination Type: SOLDER; Body Length: .465 inch;
Datasheet

Datasheet

Not In Stock

Popular Products

1N4148

Silicon Standard

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM107H/883

Texas Instruments

LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.

Details

BAV99

Cheng-yi Electronic

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

CRCW04020000Z0ED

Vishay Intertechnology

Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.

Details

BSS138

Calogic

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;

Details

1N4148

American Power Devices

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

M24308/2-1F

Cinch Connectivity Solutions

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;

Details

2N2222A

General Diode

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

RC0603FR-071KL

Yageo

Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.

Details

TCA6424ARGJR

Texas Instruments

TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.

Details

BAV99

Sangdest Microelectronics (Nanjing)

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Meritek Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

EU2B-YS3103F

Idec

ROTARY SWITCH;

Details

2N7002,215

Nexperia

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;

Details

C0603X104K5RACAUTO

KEMET Corporation

C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.

Details

OPA2277UA/2K5

Burr-Brown Corporation

OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

2N2222A

Space Power Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

SMBJ18CA

Micro Commercial Components

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

06035C104KAT2A

KYOCERA AVX

06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.

Details

SMMBT3904LT1G

Onsemi

SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.

Details

B2P3-VH(LF)(SN) Technical Details

TYPE	DESCRIPTION
Mating Contact Finish:	TIN OVER COPPER
Mating Info.:	MULTIPLE MATING PARTS AVAILABLE
IEC Conformity:	NO
Empty Shell:	NO
MIL Conformity:	NO
Termination Type:	SOLDER
Maximum Operating Temperature (Cel):	85
Body Length:	.465 inch
Contact Gender:	MALE
Connector Type:	RECTANGULAR POWER CONNECTOR
Contact Material:	BRASS
UL Flammability Code:	94V-0
Mixed Contacts:	NO
Contact Style:	SQ PIN-SKT
Filter Feature:	NO
Mounting Type:	BOARD
JESD-609 Code:	e3
Body Depth:	.37 inch
Minimum Operating Temperature:	-25 Cel
Total No. of Contacts:	2
Termination Contact Finish:	Tin (Sn)
Rated Current - Signal:	7 A
Insulator Material:	POLYAMIDE66
Additional Features:	TOP ENTRY
Reference Standard:	UL
Option:	GENERAL PURPOSE
DIN Conformance:	NO

Category Top Products

10-84-4020

Molex

The Molex 10-84-4020 is a RECTANGULAR POWER CONNECTOR with 2 contacts, made of PHOSPHOR BRONZE. It has an Insulation Resistance of 1Gohm and Dielectric Withstanding Voltage of 500VAC. Ideal for BOARD mounting applications with SOLDER termination, it operates b/w -55 to 105°C.

794276-1

TE Connectivity

TE Connectivity's 794276-1 is a rectangular power connector with silicone rubber insulator material. It has a temperature range of -55 to 105°C and can accommodate wire sizes from 20 to 14 AWG. This crimp termination type connector is commonly used in applications requiring discrete cable connections.

43045-0402

Molex

The Molex 43045-0402 is a rectangular power connector with 4 contacts, rated at 5A signal current. It features a mating contact pitch of 0.118", insulation resistance of 1Gohm, and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications in commercial settings due to its durability and UL flammability rating.

43045-1400

Molex

The Molex 43045-1400 is a rectangular power connector with a mating contact pitch of 0.118 inch and a body length of 0.97 inch. It has an insulation resistance of 1,000,000,000 ohm and is commonly used in board mounting applications for power connections.

43020-2200

Molex

The Molex 43020-2200 is a rectangular power connector with 22 contacts, PBT-POLYESTER insulator, and UL 94V-0 flammability rating. It is used for commercial applications, featuring crimp termination, straight mounting style, and latch option for secure installation on cables and panels.

3-794617-8

TE Connectivity

TE Connectivity's 3-794617-8 is a RECTANGULAR POWER CONNECTOR with 8 contacts, rated at 250V and 5A. Made of POLYAMIDE66, it operates b/w -40 to 105 °C. Ideal for power applications requiring a compact design with crimp termination and UL certification.

1723161204

Molex

Molex 1723161204 is a rectangular power connector with matte tin finish, liquid crystal polymer insulator, and copper alloy contacts. Rated for 11A signal current, it operates b/w -40°C to 120°C. Ideal for board mounting applications requiring reliable male connectors with square pin sockets.

1645526-1

TE Connectivity

TE Connectivity 1645526-1 is a RECTANGULAR POWER CONNECTOR with 4 contacts, rated for 250V and 16A. Made of POLYESTER, it operates b/w -55 to 125 °C. Ideal for board mounting applications requiring a press fit termination in a right angle male contact pattern.

B02P-VL

J S T Mfg

B02P-VL by J S T Mfg is a RECTANGULAR POWER CONNECTOR with 2 contacts, made of COPPER ALLOY. It features POLYAMIDE66 insulator material and Tin (Sn) termination contact finish. Ideal for board mounting applications requiring reliable male connectors with UL94V-0 flammability rating.

2002411212

Molex

Molex 2002411212 is a RECTANGULAR POWER CONNECTOR with dimensions 0.474" x 0.437" x 0.734". Rated for 23.5A, it operates b/w -40°C to 120°C. Ideal for BOARD mounting, SOLDER termination, and applications requiring reliable male SQ PIN-SKT contacts.

1-794617-0

TE Connectivity

TE Connectivity 1-794617-0 is a Power Connector with Mating Contact Pitch of 0.118", Insulation Resistance of 100MΩ, and Rated Voltage of 250V. It is used in applications requiring a polarized housing, crimp termination, and operating temperatures ranging from -40°C to 105°C.

43020-0800

Molex

Molex 43020-0800 is a rectangular power connector with 8 contacts, PBT-POLYESTER insulator, and -40 to 105°C operating temperature range. Ideal for commercial applications, it features crimp termination, black insulator color, and UL 94V-0 flammability rating.

50-84-2040

Molex

The Molex 50-84-2040 is a rectangular power connector with 4 contacts, rated at 13.5A signal current. It features a mating contact pitch of 0.25", insulation resistance of 1Gohm, and dielectric voltage withstand of 5000VAC. Ideal for commercial applications requiring durable connections in temperatures ranging from -55 to 105°C.

MPTC-02-16-02-01-03-L-RA-LC

Samtec

Samtec's MPTC-02-16-02-01-03-L-RA-LC is a rectangular power connector with 20 contacts, liquid crystal polymer insulator, and tin over nickel termination. It is used in commercial applications with a temperature range of -55 to 125°C for board mounting in right angle configuration.

IPS1-125-01-S-D

Samtec

The Samtec IPS1-125-01-S-D is a rectangular power connector with 50 contacts. It features phosphor bronze contact material with gold finish and liquid crystal polymer insulator. Ideal for board mounting applications requiring solder termination, especially in power systems.

350539-1

TE Connectivity

TE Connectivity 350539-1 is a Power Connector with dimensions of 0.515" x 0.375" x 0.33". It has Tin termination, rated for 12A current. Ideal for board mounting applications in electronics, it meets UL, CSA, and V standards.

CP-01114010

Cvilux

CP-01114010 by Cvilux is a POWER CONNECTOR with 14 contacts, POLYAMIDE66 insulator, and UL94V-2 flammability rating. It has a body length of 1.209" and depth of 0.772". Ideal for applications requiring reliable power connections in temperatures ranging from -25°C to 85°C.

39-29-9186

Molex

Molex 39-29-9186 is a rectangular power connector with 18 contacts, POLYAMIDE66 insulator, and bright tin finish. It has a dielectric voltage of 1500VAC and operates b/w -40 to 105°C. Ideal for board mounting applications requiring durability and reliability in commercial settings.

43045-0601

Molex

The Molex 43045-0601 is a rectangular power connector with 6 contacts, rated for 5A signal current. It features a mating contact pitch of 0.118", insulation resistance of 1Gohm, and operates b/w -40°C to 105°C. Ideal for board mounting applications requiring durable connectors with high dielectric strength and polarization key for secure connections.

172328-1

TE Connectivity

TE Connectivity's 172328-1 Power Connector features a body size of 0.465" x 0.22" x 0.933", rated voltage of 600V, and operating temperature range from -20°C to 105°C. This connector is commonly used in applications requiring a male contact gender, crimp termination type, and panel mounting for power connections.