Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

B13B-PH-K-S(LF)(SN)

Manufacturer

J S T Mfg
Manufacturer's Part Number

B13B-PH-K-S(LF)(SN)
Description

BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 800VAC; No. of Connectors: ONE; Termination Contact Finish: Tin (Sn) - reflowed;
Datasheet

Datasheet

Not In Stock

Popular Products

SMBJ18CA

Lite-on Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148GS08

Temic Semiconductors

LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.

Details

BSS138

Vishay Intertechnology

Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.

Details

BSS138PS,115

NXP Semiconductors

NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.

Details

2N7002

Calogic

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;

Details

1N4148WS

Tak Cheong Electronics Holdings

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

CRG0805F10R

Tyco Electronics Components

FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;

Details

LL4148

Semtech Electronics

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

2N7002

National Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;

Details

2N2222A

Digitron Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

STM32H743XIH6

STMicroelectronics

STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.

Details

LM555CMX

National Semiconductor

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

LM358N

Intersil

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

1N4148WT-7

Diodes Incorporated

1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.

Details

SBAV99LT1G

Onsemi

SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.

Details

SMBJ18CA

KYOCERA AVX

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

NDT2955

Onsemi

NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.

Details

ESD5Z5.0T1G

Onsemi

ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.

Details

LL4148

Good-ark Electronics

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

FDN306P

Onsemi

FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.

Details

B13B-PH-K-S(LF)(SN) Technical Details

TYPE	DESCRIPTION
PCB Contact Pattern:	RECTANGULAR
Mating Contact Finish:	TIN OVER COPPER
Mating Info.:	MULTIPLE MATING PARTS AVAILABLE
IEC Conformity:	NO
MIL Conformity:	NO
No. of Rows Loaded:	1
Termination Type:	PRESS FIT
Maximum Operating Temperature (Cel):	85
Body Length:	1.098 inch
Contact Gender:	MALE
Connector Type:	BOARD CONNECTOR
Contact Material:	BRASS
Mounting Option-1:	LOCKING
Contact Resistance:	20 mohm
Insulation Resistance:	1000000000 ohm
UL Flammability Code:	94V-0
Mounting Style:	STRAIGHT
Mixed Contacts:	NO
Contact Style:	SQ PIN-SKT
Filter Feature:	NO
No. of PCB Rows:	1
Mounting Type:	BOARD
JESD-609 Code:	e3
Body Depth:	.236 inch
Minimum Operating Temperature:	-25 Cel
Total No. of Contacts:	13
Body Width:	.177 inch
Dielectric Withstanding Voltage (V):	800VAC
Terminal Pitch (mm):	2
Terminal Length:	.134 inch
Termination Contact Finish:	Tin (Sn) - reflowed
Rated Current - Signal:	2 A
No. of Connectors:	ONE
Insulator Material:	POLYAMIDE66
Additional Features:	LOW PROFILE
Insulator Color:	NATURAL
Reference Standard:	TUV; UL
Option:	GENERAL PURPOSE
Contact Pattern:	RECTANGULAR
Mating Contact Pitch (inch):	0.079
DIN Conformance:	NO

Category Top Products

XHP-2-BK

J S T Mfg

BOARD CONNECTOR; Contact Material: NOT SPECIFIED; Manufacturer Series: XH; Mating Contact Finish: NOT SPECIFIED;

B4B-EH-A(LF)(SN)

J S T Mfg

B4B-EH-A(LF)(SN) by J S T Mfg is a 4-contact board connector with 0.098" pitch, 0.492" body length, and 0.15" body width. It uses TIN COPPER termination for soldering applications in headers & edge type connectors. The connector features POLYAMIDE66 insulator material and BRASS contact material, suitable for various electronic devices requiring a male contact gender.

50-57-9002

Molex

The Molex 50-57-9002 is a board connector with a mating contact pitch of 0.1". Featuring glass-filled polyester insulator, it operates b/w -40 to 105°C. With female SQ pin-skt contacts, it is ideal for commercial applications requiring a reliable rectangular contact pattern.

S4B-ZR-SM4A-TF(LF)(SN)

J S T Mfg

S4B-ZR-SM4A-TF(LF)(SN) by J S T Mfg is a 4-contact board connector with a mating contact pitch of 0.059". It features brass contacts with tin over copper finish, suitable for surface mount termination. This right-angle connector, made of polyamide6T insulator material, is ideal for applications requiring compact and reliable edge type connections.

T821110A1S100CEU

Amphenol

Amphenol T821110A1S100CEU is a 2-row board connector with 10 contacts, featuring gold flash over nickel finish. It uses brass as contact material and has a terminal pitch of 2.54mm for solder termination. Ideal for applications requiring male connectors in straight mounting style on boards with UL94V-0 flammability rating.

61301021121

Wuerth Elektronik & Kg

61301021121 by Wurth Elektronik is a Board Connector with 10 contacts, rated at 3A signal current. It features gold over nickel termination finish, polybutylene terephthalate insulator material, and copper alloy contact material. Ideal for commercial applications requiring a reliable connection on PCBs with a mating contact pitch of 0.1 inch.

FTSH-110-01-L-DV-K

Samtec

The Samtec FTSH-110-01-L-DV-K is a 2-row board connector with a mating contact pitch of 0.05 inches. It has a body length of 0.5 inches and can operate at temperatures ranging from -55 to 125°C. This connector is commonly used in commercial applications requiring reliable surface mount connections.

43645-0600

Molex

The Molex 43645-0600 is a board connector with 6 contacts, featuring a mating contact pitch of 0.118", insulation resistance of 1Gohm, and operating temperatures from -40 to 105°C. Ideal for commercial applications requiring durable connections, this header connector has a polyester insulator and UL94V-0 flammability rating.

66506-313LF

AMPHENOL ICC

BOARD CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;

1565917-4

TE Connectivity

TE Connectivity 1565917-4 is a Card Edge Connector with 200 contacts, gold finish, and polyethylene insulator. It has a mating contact pitch of 0.024", suitable for board mounting with right-angle style. Operating temperature ranges from -55 to 85°C, making it ideal for various electronic applications.

B2B-XH-AM(LF)(SN)

J S T Mfg

B2B-XH-AM(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 2 contacts, BRASS material, and Tin (Sn) over Copper (Cu) finish. It has a terminal pitch of 2.5mm and UL Flammability Code of 94V-0. Ideal for board mounting applications requiring reliable male connectors with solder termination.

324-91-161-41-002000

Mill-max Mfg

BOARD CONNECTOR; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e0; Termination Contact Finish: Tin/Lead (Sn/Pb) - with Nickel (Ni) barrier; Contact Material: BERYLLIUM COPPER;

DF11-8DS-2C

Hirose Electric

DF11-8DS-2C by Hirose Electric is a 2-row board connector with 8 contacts, rated at 2A signal current. It features a mating contact pitch of 0.079", insulation resistance of 1Gohm, and dielectric voltage withstand of 650VAC. Ideal for cable mounting applications with a temperature range from -30 to +85°C.

17211102101

Harting Electronics & Kg

17211102101 by Harting Electronics & Kg is a BOARD CONNECTOR with 110 contacts, GOLD OVER NICKEL finish, and GLASS FILLED POLYETHYLENE insulator. It has a Mating Contact Pitch of 0.079", operates b/w -55 to 125 °C, and offers durability up to 250 cycles. Ideal for applications requiring high insulation resistance and reliable signal current of 1A in commercial settings.

BM02B-GHS-TBT(LF)(SN)

J S T Mfg

BM02B-GHS-TBT(LF)(SN) by J S T Mfg is a 5.75" BOARD CONNECTOR with 0.049" pitch, suitable for PCBs with POLYAMIDE insulator and PHOSPHOR BRONZE contacts. It offers 500VAC dielectric voltage, -25 to 85°C operating range, and UL94V-0 flammability rating. Ideal for applications requiring high insulation resistance and 1A signal current capacity.

S3B-PH-K-S(LF)(SN)

J S T Mfg

S3B-PH-K-S(LF)(SN) by J S T Mfg is a 3-contact board connector with 0.079" pitch, suitable for applications requiring a max operating temperature of 85°C and insulation resistance of 1Gohm. It features brass contacts with tin over copper finish, press-fit termination, and a UL flammability rating of 94V-0.

B02B-XASK-1(LF)(SN)

J S T Mfg

B02B-XASK-1(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 2 contacts, COPPER ALLOY material, and TIN finish. It has a terminal pitch of 2.5mm and UL Flammability Code of 94V-0. Ideal for applications requiring reliable male connectors on circuit boards.

22-01-2047

Molex

The Molex 22-01-2047 is a board connector with 0.1" mating contact pitch, suitable for headers & edge type connectors. Featuring a 4A rated current, it has a durable design with removable contact blocks and white insulator color. Ideal for commercial applications requiring reliable connections in temperatures ranging from -40 to 105°C.

B2BZR(LF)(SN)

J S T Mfg

B2BZR(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.059" pitch, 500VAC dielectric voltage, and 1A signal current rating. Ideal for commercial applications, it features GLASS FILLED POLYAMIDE insulation, BRASS contacts with SN finish, and operates b/w -25 to 85 °C temperatures.

834-47-053-10-001000

Mill-max Mfg

BOARD CONNECTOR; JESD-609 Code: e4; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: GOLD;