Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

LFXTAL003068

Manufacturer

Iqd Frequency Products
Manufacturer's Part Number

LFXTAL003068
Description

Quartz Crystals;
Datasheet

Datasheet

Not In Stock

Popular Products

2N2222A

Microchip Technology

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;

Details

1N4148

Rfe International

RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;

Details

BAV99

Promax-johnton

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM555CM

Intersil

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

1N4148WS

General Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Synsemi

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M39029/58-360

Defense Logistics Agency

CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;

Details

LL4148

Transys Electronics

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

CRGCQ0805F10K

TE Connectivity

TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.

Details

SS14

Hy Electronic

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WT

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Meritek Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MURS160T3G

Onsemi

MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.

Details

BAV99

Secos

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Compensated Devices

RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;

Details

PIC18F4550-I/ML

Microchip Technology

The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.

Details

08055C104KAT2A

KYOCERA AVX

08055C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.

Details

BAV99

Comchip Technology

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

OHN3020U

Tt Electronics Plc

OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.

Details

SN6505BDBVR

Texas Instruments

SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.

Details

Category Top Products

ABLS2-11.059MHZ-B4Y-T

Abracon

ABLS2-11.059MHZ-B4Y-T by Abracon is a 11.059 MHz crystal oscillator with 30 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, it operates b/w -20°C to 70°C and features a compact surface mount design.

MP042

Cts

PARALLEL - FUNDAMENTAL; Mounting Feature: THROUGH HOLE MOUNT; Frequency Tolerance: 45 ppm; Minimum Operating Temperature: -20 Cel; JESD-609 Code: e1; Drive Level: 100 uW;

ABM8AIG-12.000MHZ-12-2Z-T3

Abracon

ABM8AIG-12.000MHZ-12-2Z-T3 by Abracon is a 12 MHz crystal oscillator with 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing in temperature ranges from -40 to 125 °C, such as telecommunications equipment and industrial automation systems.

ECS-.327-9-12-TR

Ecs International

ECS-0.327-9-12-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 90000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as telecommunications and networking equipment. Operating range from -40 to 85 °C with gold terminal finish for durability.

ATS120CSM-1E

Cts

ATS120CSM-1E by Cts is a crystal oscillator with 12 MHz nominal frequency, 30 ppm tolerance, and 50% stability. Ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range and low aging rate of 5 PPM/YEAR.

NX5032GA-8.000M-STD-CSU-1

Nihon Dempa Kogyo

NX5032GA-8.000M-STD-CSU-1 by Nihon Dempa Kogyo is an 8 MHz crystal oscillator with 50 ppm frequency tolerance and 150% stability. Ideal for applications requiring a surface mount, it operates b/w -40 to 150 °C, with a drive level of 10 uW.

ABS07AIG-32.768KHZ-9-T

Abracon

Abracon's ABS07AIG-32.768KHZ-9-T crystal oscillator offers 20 ppm frequency tolerance, 400% stability, and 80000 ohm series resistance. Ideal for applications requiring precise timing at a frequency of 0.032768 MHz, such as in automotive electronics or IoT devices.

TSX-322524.0000MD30X-C3

Seiko Epson

TSX-322524.0000MD30X-C3 by Seiko Epson is a 24 MHz crystal oscillator with 30 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing in temperature range of -40 to 85 °C, featuring gold over nickel terminal finish and surface mounting feature.

XRCGB27M000F2P00R0

Murata Manufacturing

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 5 PPM/YEAR; Drive Level: 300 uW; Minimum Operating Temperature: -30 Cel;

ABS07AIG-32.768KHZ-7-1-T

Abracon

Abracon's ABS07AIG-32.768KHZ-7-1-T crystal oscillator offers 10 ppm frequency tolerance, 400% stability, and 80000 ohm series resistance. Ideal for applications requiring a 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing circuits in industrial automation.

MC-40632.7680K-A0:PURESN

Seiko Epson

MC-40632.7680K-A0:PURESN by Seiko Epson is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as precision timekeeping in temperature-sensitive environments.

ABS25-32.768KHZ-T

Abracon

Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.

ABLSG-20.000MHZ-D-2-Y-T

Abracon

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 5 PPM/YEAR; Physical Dimension: L11.4XB4.7XH4.2 (mm)/L0.449XB0.185XH0.165 (inch); Minimum Operating Temperature: -40 Cel;

ABM8W-12.0000MHZ-6-D2X-T3

Abracon

Abracon's ABM8W-12.0000MHZ-6-D2X-T3 crystal oscillator operates at 12 MHz with a frequency tolerance of 20 ppm and stability of 20%. Ideal for applications requiring precise timing, it features a parallel fundamental crystal type, surface mounting feature, and gold over nickel terminal finish.

TSX-322532.0000MF10Z-W6

Seiko Epson

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 10 ppm; Aging: 1 PPM/FIRST YEAR; Terminal Finish: GOLD OVER NICKEL; Series Resistance: 40 ohm;

MP042-E

Cts

PARALLEL - FUNDAMENTAL; Mounting Feature: THROUGH HOLE MOUNT; Frequency Tolerance: 30 ppm; Aging: 5 PPM/YEAR; Additional Features: AT CUT; BULK; Nominal Operating Frequency: 4.9152 MHz;

ATS073SM-1E

Cts

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 30 ppm; Aging: 5 PPM/YEAR; Additional Features: AT CUT; Maximum Operating Temperature: 85 Cel;

AB26TRQ-32.768KHZ-T

Abracon

AB26TRQ-32.768KHZ-T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 65000 ohm series resistance. Ideal for applications requiring precise timing such as IoT devices, wearables, and communication equipment due to its 0.032768 MHz nominal operating frequency and surface mounting feature.

Q13MC1462000612

Seiko Epson

Seiko Epson's Q13MC1462000612 crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 45000 ohm series resistance. Ideal for applications requiring precise timing at a frequency of 0.032768 MHz. Suitable for surface mount installations in various electronic devices operating b/w -40 to 85 °C.

R1612-32.000-10-F-1530-TR

Raltron Electronics

Raltron Electronics' R1612-32.000-10-F-1530-TR crystal oscillator offers 15 ppm frequency tolerance, 30% stability, and 150 ohm series resistance. Ideal for applications requiring a parallel-fundamental type crystal resonator operating at 32 MHz with a load capacitance of 10 pF.