Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

LM741CH

Manufacturer

Intersil
Manufacturer's Part Number

LM741CH
Description

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 15000;
Datasheet

Datasheet

Not In Stock

Popular Products

CRCW04020000Z0EDHP

Vishay Intertechnology

Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.

Details

MBR0520L-T1

Won-top Electronics

MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.

Details

LM358N

Samsung

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

STM32H753BIT6

STMicroelectronics

STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.

Details

SMBJ18CA

Thinking Electronic Industrial

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

U.FL-R-SMT-1(10)

Hirose Electric

U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.

Details

SS14

Continental Device India

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ERJ2RKF1002X

Panasonic

Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.

Details

LIS3DHTR

STMicroelectronics

LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.

Details

FDLL4148

National Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

SS14

Rugao Dachang Electronic

RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;

Details

2N2222A

Micro Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

M39029/58-360

Conesys

CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;

Details

NC7WZ07P6X

Onsemi

The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.

Details

2N7002

Plessey Semiconductors Discrete Components Div

Other Transistors;

Details

M39029/58360

Souriau

CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;

Details

AMS1117-3.3

Advanced Monolithic Systems

AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.

Details

LL4148

Diotec Semiconductor Ag

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

MBRM140T1G

Onsemi

MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.

Details

LM317T

Tt Electronics Plc

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;

Details

LM741CH Technical Details

TYPE	DESCRIPTION
Package Body Material:	Metal
Frequency Compensation:	Yes
Maximum Supply Voltage Limit:	18 V
Maximum Bias Current (IIB) @25C:	500 nA
Sub-Category:	Operational Amplifiers
Maximum Supply Current:	2.8 mA
Terminal Finish:	Tin/Lead
No. of Terminals:	8
Maximum Input Offset Voltage:	7500 uV
Terminal Position:	Bottom
Package Style (Meter):	Cylindrical
Technology:	BIPOLAR
JESD-30 Code:	O-MBCY-W8
Low-Offset:	No
Minimum Voltage Gain:	15000
Package Shape:	Round
Terminal Form:	Wire
Maximum Operating Temperature:	70 °C (158 °F)
Amplifier Type:	Operational Amplifier
Architecture:	Voltage Feedback
Nominal Negative Supply Voltage (Vsup):	-15 V
JESD-609 Code:	e0
Minimum Operating Temperature:	0 °C (32 °F)
No. of Functions:	1
Qualification:	No
Package Equivalence Code:	CAN8,.2
Nominal Supply Voltage / Vsup (V):	15 V
Temperature Grade:	Commercial
Power Supplies (V):	±15 V

Category Top Products

INA139NA/250

Texas Instruments

INA139NA/250 by Texas Instruments is a micropower instrumentation amplifier with 1000uV max input offset voltage, 10uA max average bias current, and 115dB nominal CMRR. Ideal for automotive applications, it operates at -40 to 125 °C with a supply voltage of 5V and bandwidth of 0.44 MHz.

OPA551FA/500

Burr-Brown Corporation

OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 7; Package Shape: RECTANGULAR; Terminal Pitch: 1.27 mm;

OPA549TG3

Texas Instruments

OPA549TG3 by Texas Instruments is an operational amplifier (Op Amp) with a max input offset voltage of 5000 uV, a max average bias current of -0.5 uA, and a nominal voltage of 30 V. It is commonly used in industrial applications that require high voltage amplification and precise signal processing.

TL072CDT

Texas Instruments

TL072CDT by Texas Instruments is a dual operational amplifier with 100 dB CMRR and 3000 kHz unity gain bandwidth. With a max supply voltage of ±18 V, it's ideal for commercial applications requiring precise signal amplification in compact designs. The op amp features low input offset voltage of 13 uV and ultra-low bias current of 0.007 uA, making it suitable for high-performance audio equipment and sensor interfaces.

AD822ARZ

Analog Devices

AD822ARZ by Analog Devices is an Operational Amplifier with 3000uV Max Input Offset Voltage, 80dB Nominal CMRR, and 1900kHz Unity Gain Bandwidth. Widely used in industrial applications for its low-bias, micropower features and VOLTAGE-FEEDBACK architecture.

TL072CP

STMicroelectronics

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

INA169NA/3KG4

Texas Instruments

INA169NA/3KG4 by Texas Instruments is an operational amplifier with 1000uV max input offset voltage, 10uA max average bias current, and 120dB nominal CMRR. Ideal for automotive applications due to its small size, low power consumption, and wide operating temperature range from -40°C to 125°C.

LM358M

Texas Instruments

LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.

OPA547F

Texas Instruments

OPA547F by Texas Instruments is an Operational Amplifier with a max input offset voltage of 5000 uV, 95 dB nominal common mode reject ratio, and 100000 min voltage gain. It is used in industrial applications requiring precise signal amplification and temperature stability.

MCP602-I/SN

Microchip Technology

MCP602-I/SN by Microchip Tech is a CMOS Op Amp with 3000uV input offset voltage, 90dB CMRR, and 2800kHz unity gain bandwidth. Ideal for industrial applications requiring low bias current and micropower consumption in a small outline package.

LM7321MFX

National Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR;

LMV321ILT

STMicroelectronics

LMV321ILT by STMicroelectronics is a micropower operational amplifier with a max input offset voltage of 6000 uV and a nominal common mode reject ratio of 95 dB. It operates on supply voltages of 2.7-5 V, making it suitable for automotive applications requiring low power consumption. With a small outline package and BICMOS technology, this op amp offers high performance in compact designs.

TL082CP

Texas Instruments

TL082CP by Texas Instruments is a dual operational amplifier with 86 dB CMRR and 15 V supply voltage. With low bias current of 0.01 uA, it's ideal for precision applications in commercial temperature range. Featuring 3000 kHz unity gain bandwidth, it suits various signal processing tasks.

LM258D

Onsemi

OPERATIONAL AMPLIFIER; Temperature Grade: OTHER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

LM324MT/NOPB

Rochester Electronics

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: TSSOP; Package Shape: RECTANGULAR;

OPA2188AIDGKR

Texas Instruments

OPA2188AIDGKR by Texas Instruments is a dual operational amplifier with low-offset and low-bias features. It has a max input offset voltage of 25uV, nominal unity gain bandwidth of 2MHz, and operates in an industrial temperature range. Ideal for precision applications requiring micropower consumption and high common mode rejection ratio.

INA240A1DR

Texas Instruments

Texas Instruments' INA240A1DR is an Operational Amplifier with 25uV Max Input Offset Voltage, 132dB Nominal CMRR, and 400kHz Unity Gain Bandwidth. Ideal for applications requiring precise current sensing in a compact package with Vsup of 5V, -40 to 125°C operating temp range, and low-offset performance.

MC33079DT

STMicroelectronics

MC33079DT by STMicroelectronics is a 4-function operational amplifier with max input offset voltage of 3500uV and min slew rate of 5V/us. Widely used in industrial applications, it operates at temperatures ranging from -40 to 105°C, making it suitable for various voltage-feedback amplifier circuits.

OP07CP

Calogic

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

LM324AN/NOPB

Rochester Electronics

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;