Image shown is a representation only. Exact specifications should be obtained from the product data sheet.
IS25LP128-JBLE
-
ManufacturerIntegrated Silicon Solution
-
Manufacturer's Part NumberIS25LP128-JBLE
-
DescriptionFLASH; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: SQUARE; No. of Functions: 1;
-
Datasheet
Not In Stock
Popular Products
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
Details
ST3485EBDR
STMicroelectronics
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
Details
MMBT3904LT1G
Onsemi
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
Details
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
Details
LM317T/NOPB
Texas Instruments
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
Details
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
Details
LM358M
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Details
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
Details
BSS138
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Details
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
Details
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
Details
2N7002
Diotec Semiconductor Ag
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;
Details
NC7WZ07P6X
Onsemi
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
Details
1N5819HW-7-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Details
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
Details
SMBJ18CA
Secos
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Details
LM317TG
Texas Instruments
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
Details
MMSZ5245BT1G
Onsemi
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
Details
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
DetailsIS25LP128-JBLE Technical Details
| TYPE | DESCRIPTION |
|---|---|
| Package Body Material: | PLASTIC/EPOXY |
| Maximum Standby Current: | .000065 Amp |
| Organization: | 128MX1 |
| Output Characteristics: | 3-STATE |
| Maximum Seated Height: | 2.16 mm |
| Programming Voltage (V): | 2.7 |
| Minimum Supply Voltage (Vsup): | 2.3 V |
| Surface Mount: | YES |
| Maximum Supply Current: | 14 mA |
| Terminal Finish: | TIN |
| No. of Terminals: | 8 |
| Maximum Clock Frequency (fCLK): | 133 MHz |
| No. of Words: | 134217728 words |
| Terminal Position: | DUAL |
| Package Style (Meter): | SMALL OUTLINE |
| Write Protection: | HARDWARE/SOFTWARE |
| Technology: | CMOS |
| JESD-30 Code: | S-PDSO-G8 |
| Package Shape: | SQUARE |
| Terminal Form: | GULL WING |
| Operating Mode: | SYNCHRONOUS |
| Maximum Operating Temperature: | 105 Cel |
| Endurance: | 100000 Write/Erase Cycles |
| Package Code: | SOP |
| Width: | 5.28 mm |
| Moisture Sensitivity Level (MSL): | 1 |
| Serial Bus Type: | 4-WIRE |
| Other Names: | 706-1341 |
| Memory Density: | 134217728 bit |
| Memory IC Type: | FLASH |
| JESD-609 Code: | e3 |
| Minimum Operating Temperature: | -40 Cel |
| Memory Width: | 1 |
| No. of Functions: | 1 |
| Package Equivalence Code: | SOP8,.3 |
| Alternate Memory Width: | 1 |
| Length: | 5.28 mm |
| No. of Words Code: | 128M |
| Nominal Supply Voltage / Vsup (V): | 3 |
| Minimum Data Retention Time: | 20 |
| Parallel or Serial: | SERIAL |
| Terminal Pitch: | 1.27 mm |
| Temperature Grade: | INDUSTRIAL |
| Maximum Supply Voltage (Vsup): | 3.6 V |
