Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

All prices are in USD

Bulk

QTY	Unit Price	Ext Price
533	$0.156	$83.041

TLI49632MXTSA1

Manufacturer

Infineon Technologies
Manufacturer's Part Number

TLI49632MXTSA1
Description

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; Output Type: CURRENT OUTPUT; Package Shape or Style: RECTANGULAR; Output Range: 0-5mA; Minimum Range Of Magnetic Field: -7.3 mT;
Datasheet

Datasheet

533 In Stock

Popular Products

FT232RL-REEL

FTDI

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

Details

OPA2227UA

Texas Instruments

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

Details

1N4148

Comchip Technology

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N2222A

Bharat Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

LM107H/883C

National Semiconductor

LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.

Details

IRLML6402TRPBF

Infineon Technologies

IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.

Details

LM107H/883

Rochester Electronics

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;

Details

LL4148

Rugao Dachang Electronic

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BAV99

Yangzhou Yangjie Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Vishay Intertechnology

Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.

Details

PIC18F4550-I/ML

Microchip Technology

The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.

Details

1N4148WT

Diotec Semiconductor Ag

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

TM4C1294NCPDTI3

Texas Instruments

TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.

Details

2N7002

Fairchild Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;

Details

ATMEGA328P-AU

Atmel

MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;

Details

BAV99

Infineon Technologies

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358N

Texas Instruments

LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.

Details

BAV99WT1G

Fairchild Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

FSMLF327

Fox Electronics

FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.

Details

ECS-.327-12.5-17X-TR

Ecs International

ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.

Details

TLI49632MXTSA1 Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	3 V
Minimum Range Of Magnetic Field:	-7.3 mT
Other Names:	TLI49632MXTSA1-ND INFINFTLI49632MXTSA1 TLI49632MXTSA1CT SP000930186 2156-TLI49632MXTSA1 TLI49632MXTSA1DKR TLI49632MXTSA1TR
Maximum Operating Current:	2.5 mA
Maximum Supply Voltage:	5.5 V
Output Range:	0-5mA
Output Type:	CURRENT OUTPUT
Maximum Output Current:	5 A
Housing:	PLASTIC
Terminal Finish:	TIN
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	SURFACE MOUNT
Body Width:	1.3 inch
Sensors or Transducers Type:	MAGNETIC FIELD SENSOR,HALL EFFECT
Maximum Magnetic Field Range:	7.3 mT
Package Shape or Style:	RECTANGULAR
Termination Type:	SOLDER
Body Height:	1 mm
Body Length/Diameter:	2.9 mm
Maximum Operating Temperature:	125 Cel
Hysteresis:	10 mT

Category Top Products

SNDH-T4C-G01

Honeywell Sensing And Control

SNDH-T4C-G01 by Honeywell is a Hall effect magnetic field sensor with 4.5-18V supply voltage range, -40 to 150°C operating temperature, and 20A output current. It features a cylindrical shape, open-collector digital output, and flange mount for industrial applications requiring precise magnetic field detection.

TLE4984CHTE6747HAMA1

Infineon Technologies

Infineon's TLE4984CHTE6747HAMA1 is a Hall effect magnetic field sensor with 3.3V to 18V supply voltage range and 0-120mT magnetic field detection. It features digital voltage output, 7.5mA max operating current, and comes in a rectangular plastic package. Ideal for applications requiring precise magnetic field sensing like automotive systems and industrial automation.

APS12200LLHALX

Allegro MicroSystems

APS12200LLHALX by Allegro MicroSystems is a magnetic field sensor with 24V max supply voltage, 4mT hysteresis, and -40 to 150°C operating temperature range. Ideal for current output applications, it features a 3-wire interface and surface mounting feature.

A3295KLHLT-T

Allegro MicroSystems

A3295KLHLT-T by Allegro MicroSystems is a magnetic field sensor with 24V max supply voltage, 7mT hysteresis, and 30-60mA current output. Ideal for applications requiring precise detection of magnetic fields in the range of 0.5-7.5 mT, such as automotive sensors and industrial control systems.

APS13295KUAA

Allegro MicroSystems

MAGNETIC FIELD SENSOR,HALL EFFECT;

AH49ENTR-G1

Diodes Incorporated

AH49ENTR-G1 by Diodes Inc. is a magnetic field sensor with 3 terminals, operating voltage range of 3-6.5V, and sensitivity of 1.6mV/G. Ideal for applications requiring single-ended analog voltage output in temperature range -40 to 85°C, such as automotive and industrial systems.

ACS716KLATR-25CB-T

Allegro MicroSystems

ACS716KLATR-25CB-T by Allegro MicroSystems is a magnetic field sensor with 3-3.6V supply voltage, 0.75% linearity, and 11mA max current. Ideal for applications requiring Hall effect sensors in a compact rectangular package for surface mounting.

A1106LUA-T

Allegro MicroSystems

Allegro MicroSystems' A1106LUA-T is a Hall effect magnetic field sensor with 3 terminals, offering voltage output. It operates b/w -40 to 150°C and can detect magnetic fields ranging from 16 to 43 mT. With AEC-Q100 screening, it's ideal for automotive applications requiring precise magnetic field measurements.

A3290KUA-T

Allegro MicroSystems

Allegro MicroSystems' A3290KUA-T is a magnetic field sensor with 24V max supply voltage, 100mT hysteresis, and 500mV output range. Ideal for applications requiring digital voltage output in environments ranging from -40°C to 125°C.

A1103LLHLX-T

Allegro MicroSystems

Allegro MicroSystems' A1103LLHLX-T is a magnetic field sensor with 24V max supply, -40 to 150°C operating temp, and 5.5mT hysteresis. Ideal for automotive applications due to AEC-Q100 screening level, BICMOS technology, and voltage output. Features surface mounting style and solder termination in a compact rectangular package.

A3291KLHLX-T

Allegro MicroSystems

A3291KLHLX-T by Allegro MicroSystems is a magnetic field sensor with 3-24V supply, 20mT hysteresis, and 30-60mA output. Ideal for hall effect sensing applications in automotive systems due to its -40 to 125°C operating range and solder termination for surface mounting.

AH49FNTR-G1

Diodes Incorporated

AH49FNTR-G1 by Diodes Inc. is a magnetic field sensor with 3-8V supply, -40 to 105°C temp range, and 4mA max current. Ideal for hall effect sensing applications due to its voltage output, compact size (2.92x1.6x1.45mm), and high linearity of 0.70%.

OHS3030U

Tt Electronics Plc

OHS3030U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.

DRV5055A3QLPG

Texas Instruments

DRV5055A3QLPG by Texas Instruments is a magnetic field sensor with a max supply voltage of 3.63V and an output range of -1-1mA. It is commonly used in applications such as automotive, industrial, and consumer electronics for measuring magnetic fields.

ACS772ECBTV-250B-PFF-T

Allegro MicroSystems

MAGNETIC FIELD SENSOR,HALL EFFECT;

2SS52M-T2

Honeywell Sensing And Control

2SS52M-T2 by Honeywell is a magnetic field sensor with single-ended output circuit. It operates b/w -40 to 150°C, with a max current of 11mA and output range of 20mA. Ideal for applications requiring precise magnetic field detection in compact spaces.

A1244LLHLX-I1-T

Allegro MicroSystems

Allegro MicroSystems' A1244LLHLX-I1-T is a magnetic field sensor with 3-24V power supply, 11mT hysteresis, and -40 to 150°C operating temperature range. Ideal for applications requiring precise analog current output in a compact rectangular package.

AH1806-Z-7

Diodes Incorporated

AH1806-Z-7 by Diodes Inc. is a magnetic field sensor with a voltage output and open-drain configuration. It operates within a temperature range of -40 to 85°C and has a max supply voltage of 5.5V. This sensor, which is mounted on the surface, is commonly used in applications that require precise measurement and detection of magnetic fields.

MLX90242ESE-GAA-000-RE

Melexis N V

MLX90242ESE-GAA-000-RE by Melexis N V is a magnetic field sensor with 4.5-5.5V supply voltage range, -40 to 85°C operating temperature, and digital current output. Ideal for applications requiring precise magnetic field detection in compact spaces like automotive sensors and industrial automation systems.

55100-3M-02-A

Hamlin Electronics Europe

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: FLANGE MOUNT; Output Type: DIGITAL CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 10mA; Minimum Operating Temperature: -40 Cel;