TLE4998S8DXUMA1 by Infineon Technologies

Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

TLE4998S8DXUMA1

Manufacturer

Infineon Technologies
Manufacturer's Part Number

TLE4998S8DXUMA1
Description

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 0-5mA; Maximum Operating Temperature: 125 Cel;
Datasheet

Datasheet

Not In Stock

Popular Products

SMBJ18CA

Lite-on Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Micro Commercial Components

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N2222A

Forward International Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;

Details

DS18B20U+

Maxim Integrated

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;

Details

SS14

Bytesonic Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS123NH6327XTSA1

Infineon Technologies

Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.

Details

1N4148WS

Yangzhou Yangjie Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

FSMLF327

Fox Electronics

FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.

Details

FT232RL-REEL

FTDI

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

Details

AB26TRB-32.768KHZ--T

Abracon

AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.

Details

1N4148

Taitron Components

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148WS

Vishay Intertechnology

Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.

Details

M24308/2-1F

Amphenol

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;

Details

SS14

Daco Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

DS18B20Z

Dallas Semiconductor

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;

Details

LM555CM

Onsemi

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

CRCW040210K0FKED

Vishay Intertechnology

Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.

Details

2N2222A

SPC TECHNOLOGY/ MULTICOMP

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

LM317BD2TG

Onsemi

LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.

Details

BAV99

Vishay Intertechnology

Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.

Details

TLE4998S8DXUMA1 Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	4.5 V
Minimum Range Of Magnetic Field:	-50 mT
Maximum Operating Current:	8 mA
Maximum Supply Voltage:	5.5 V
Output Range:	0-5mA
Output Type:	DIGITAL CURRENT
Maximum Output Current:	5 A
Housing:	PLASTIC
Terminal Finish:	TIN
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	SURFACE MOUNT
Body Width:	3.9 inch
Sensors or Transducers Type:	MAGNETIC FIELD SENSOR,HALL EFFECT
Maximum Magnetic Field Range:	200 mT
Package Shape or Style:	RECTANGULAR
Termination Type:	SOLDER
Body Height:	1.2 mm
Additional Features:	AEC-Q100; IT ALSO OPERATES AT EXTENDED RANGE 4.1 TO 16V SUPPLY VOLTAGE; IT HAS SENSITIVITY OF 245 LSB12/MT; SHORT-CIRCUIT PROTECTION
Body Length/Diameter:	5 mm
Maximum Operating Temperature:	125 Cel

Category Top Products

TLE49215UXA

Infineon Technologies

TLE49215UXA by Infineon is a magnetic field sensor with 24V max supply, 1.5mT hysteresis, and -5mV/G sensitivity. Ideal for applications requiring precise digital voltage output in a compact rectangular package with through-hole mounting.

CLSM-50LA

Sypris Test & Measurement

CLSM-50LA by Sypris Test & Measurement is a Hall effect magnetic field sensor with 0.1% linearity, operating b/w -40°C to 85°C. It has a max output current of 50A and operates on analog current output type. With dimensions of 18" x 30.1mm x 45.5mm, it is ideal for applications requiring precise magnetic field measurements in industrial settings.

TLV49681TAXBXA1

Infineon Technologies

TLV49681TAXBXA1 by Infineon: Magnetic field sensor with 3-26V supply, 2mT hysteresis, -40 to 125°C temp range. Ideal for current output applications requiring precise magnetic field detection in compact designs.

SS449R

Honeywell Sensing And Control

MAGNETIC FIELD SENSOR,HALL EFFECT;

APS11060LUAA-0SL

Allegro MicroSystems

Magnetic Field Sensors;

DRV5013ADQLPG

Texas Instruments

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0-38V; Input Mode: BIPOLAR;

SS495A2-SP

Honeywell Sensing And Control

SS495A2-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring precise sensing of magnetic fields in the range of -67mT to 67mT, such as automotive systems and industrial automation due to its compact rectangular design and high sensitivity of 3.125 mV/G.

A3291KLHLT-T

Allegro MicroSystems

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 500mV;

DRV5056A1QDBZR

Texas Instruments

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: -1-1mA; Body Height: 1.12 mm;

SS441R

Honeywell Sensing And Control

MAGNETIC FIELD SENSOR,HALL EFFECT;

THS119

Toshiba

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Maximum Operating Temperature: 125 Cel; Output (V): DIFFERENTIAL; Output Circuit Type: DIFFERENTIAL;

A1260LLHLT-T

Allegro MicroSystems

Allegro MicroSystems' A1260LLHLT-T is a magnetic field sensor with 3-24V power supply, -40 to 150°C operating temp, and 5mT hysteresis. Ideal for automotive applications due to AEC-Q100 screening, open-drain output circuit, and BICMOS technology for precise current output control.

SS491B

Honeywell Sensing And Control

SS491B by Honeywell is a magnetic field sensor with a supply voltage range of 4.5V to 10.5V and an output range of 0.40-9.80V, suitable for applications requiring precise analog voltage outputs in temperatures ranging from -40°C to 85°C. With a compact rectangular design measuring 1.57" x 4.06mm x 2.99mm, it features through-hole mounting and solder termination for easy integration into various systems.

AH3572-P-B

Diodes Incorporated

MAGNETIC FIELD SENSOR,HALL EFFECT; Terminal Finish: MATTE TIN; JESD-609 Code: e3;

SS94-A1

Honeywell Sensing And Control

SS94-A1 by Honeywell is a magnetic field sensor with 3 terminals, outputting analog voltage in the range of 3.96-4.04V. It operates b/w -40 to 125°C, with sensitivity of 5 mV/G and max magnetic field range of 50 mT. Ideal for applications requiring precise magnetic field detection and measurement in various environments.

A1308LLHLT-2-T

Allegro MicroSystems

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -40 Cel; Body Width: 1.91 inch;

A1123ELHLT-T

Allegro MicroSystems

MAGNETIC FIELD SENSOR,HALL EFFECT;

AH3363Q-P-B

Diodes Incorporated

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: CURRENT OUTPUT; Package Shape or Style: RECTANGULAR; Package Equivalence Code: SIP3,.02,50;

DRV5013ADQDBZRQ1

Texas Instruments

DRV5013ADQDBZRQ1 by Texas Instruments is a magnetic field sensor with 5.4 mT hysteresis, 0-30mA current output range, and -40 to 125°C operating temperature. Ideal for automotive applications due to AEC-Q100 screening level, it features a latched bipolar input mode and open-drain output interface.

ACS716KLATR-12CB-NL-T

Allegro MicroSystems

Allegro MicroSystems' ACS716KLATR-12CB-NL-T is a magnetic field sensor with 0.75% linearity, operating b/w -40 to 125°C. It features a max supply voltage of 3.6V and output type as analog voltage. Ideal for applications requiring precise magnetic field sensing in compact spaces.