Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

TLE49641MXTMA1

Manufacturer

Infineon Technologies
Manufacturer's Part Number

TLE49641MXTMA1
Description

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; Output Type: CURRENT OUTPUT; Package Shape or Style: RECTANGULAR; Output Range: 0-25mA; Body Height: 1 mm;
Datasheet

Datasheet

Not In Stock

Popular Products

SS14

Changzhou Starsea Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

PIC18F4550-I/ML

Microchip Technology

The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.

Details

ULN2803A

Allegro MicroSystems

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;

Details

FSMLF327

Fox Electronics

FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.

Details

1N4148

Diotec Semiconductor Ag

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SMBJ18CA

Sangdest Microelectronics (Nanjing)

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Vishay Sprague

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Continental Device India

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

2N7002

Calogic

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;

Details

SS14

Microsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS123LT1G

Onsemi

BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.

Details

BAV99

Infinex

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MMBT3906LT1G

Onsemi

MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.

Details

1N4148

Vishay Telefunken

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148WS

First Components International

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

STMicroelectronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

USB2514BI-AEZG

Microchip Technology

USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.

Details

M85049/85-08W02

Amphenol

CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;

Details

BAV99

Jgd Semiconductors

RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;

Details

LM317T

Bay Linear

Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;

Details

TLE49641MXTMA1 Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	3 V
Minimum Range Of Magnetic Field:	8.4 mT
Maximum Operating Current:	2.5 mA
Maximum Supply Voltage:	32 V
Output Range:	0-25mA
Output Type:	CURRENT OUTPUT
Maximum Output Current:	25 A
Housing:	PLASTIC
Terminal Finish:	TIN
JESD-609 Code:	e3
Mounting Feature:	SURFACE MOUNT
Body Width:	1.3 inch
Sensors or Transducers Type:	MAGNETIC FIELD SENSOR,HALL EFFECT
Maximum Magnetic Field Range:	23.5 mT
Package Shape or Style:	RECTANGULAR
Termination Type:	SOLDER
Body Height:	1 mm
Additional Features:	REVERSE POLARITY PROTECTION, OPEN DRAIN OUTPUT
Body Length/Diameter:	2.9 mm
Hysteresis:	5.5 mT

Category Top Products

DRV5033AJQDBZRQ1

Texas Instruments

Texas Instruments' DRV5033AJQDBZRQ1 is a magnetic field sensor with hysteresis of 3.4 mT, operating temperature range from -40 to 125°C, and output current up to 30 A. Ideal for automotive applications due to AEC-Q100 screening level and unipolar input mode, it features a digital current output via open-drain interface.

DRV5023BIEDBZRQ1

Texas Instruments

Texas Instruments' DRV5023BIEDBZRQ1 is a magnetic field sensor with 8.5mT hysteresis, 0-30mA output range, and -40 to 150°C operating temperature. Ideal for automotive applications due to AEC-Q100 screening level, it features an open-drain digital current output and operates on a supply voltage range of 2.7V to 38V.

TMAG5170A1QDGKT

Texas Instruments

TMAG5170A1QDGKT by Texas Instruments is a 4-WIRE INTERFACE magnetic field sensor with -40 to 150°C operating temp range, 2.3-5.5V supply voltage, and -2-2mA output current. Ideal for surface mount applications in various industries like automotive and industrial automation.

DRV5056A1QLPG

Texas Instruments

Texas Instruments' DRV5056A1QLPG is a magnetic field sensor with 3-3.63V supply voltage range, -40 to 125°C operating temperature, and 19mT min magnetic field range. It outputs analog voltage from 0.535-3.1V with a max current of 1A, making it ideal for Hall effect sensing applications in various industries.

AH9251-P-B

Diodes Incorporated

AH9251-P-B by Diodes Inc. is a magnetic field sensor with 2.5-5.5V supply voltage range, -40 to 85°C operating temperature, and 1mA output current. Ideal for hall effect applications in automotive sensors, industrial controls, and consumer electronics due to its compact rectangular package design and through-hole mounting feature.

DRV5013AGQDBZR

Texas Instruments

DRV5013AGQDBZR by Texas Instruments is a magnetic field sensor with a supply voltage range of 2.5V to 38V and hysteresis of 12mT. It operates in temperatures from -40°C to 125°C, making it suitable for various applications requiring precise digital voltage output based on magnetic field strength measurements. The sensor's compact rectangular package with surface mounting feature makes it ideal for space-constrained designs.

DRV5013ADQDBZTQ1

Texas Instruments

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; Output Type: CURRENT OUTPUT; Package Shape or Style: RECTANGULAR; Output Range: 0-30mA; JESD-609 Code: e4;

DRV5011ADDMRR

Texas Instruments

DRV5011ADDMRR by Texas Instruments is a magnetic field sensor with 5.5V max supply voltage, 4mT hysteresis, and -40 to 135°C operating temperature range. It features a push-pull current output and is ideal for applications requiring precise magnetic field detection in compact spaces.

A1152LLHLX-T

Allegro MicroSystems

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Maximum Supply Voltage: 24 V;

AH8500-FDC-7

Diodes Incorporated

Diodes Inc. AH8500-FDC-7 is a 3.6V magnetic field sensor with 99.9% linearity, ideal for Hall effect applications. Operating b/w -40°C to 85°C, it offers voltage output and consumes 2.4mA current, suitable for surface mount installations in various industries.

SS495A2-S

Honeywell Sensing And Control

MAGNETIC FIELD SENSOR,HALL EFFECT;

HMC1041ZTR

Honeywell

MAGNETIC FIELD SENSOR,MAGNETORESISTIVE; Mounting Feature: SURFACE MOUNT; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; Minimum Supply Voltage: 2 V; Housing: PLASTIC;

AH49ENTR-G1

Diodes Incorporated

AH49ENTR-G1 by Diodes Inc. is a magnetic field sensor with 3 terminals, operating voltage range of 3-6.5V, and sensitivity of 1.6mV/G. Ideal for applications requiring single-ended analog voltage output in temperature range -40 to 85°C, such as automotive and industrial systems.

APS13295KLHALT

Allegro MicroSystems

MAGNETIC FIELD SENSOR,HALL EFFECT;

A1318LLHLT-1-T

Allegro MicroSystems

MAGNETIC FIELD SENSOR,HALL EFFECT; Terminal Finish: MATTE TIN; JESD-609 Code: e3;

TLE4905L

Siemens

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; Body Width: 1.52 inch; Body Height: 3.29 mm;

DRV5056A2QLPG

Texas Instruments

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0.54-3.1V; Minimum Supply Voltage: 3 V;

OHS3040U

Tt Electronics Plc

OHS3040U by Tt Electronics Plc is a magnetic field sensor with hysteresis of 3.5 mT, operating voltage range of 4.5-24 V, and output current up to 25 A. Ideal for applications requiring precise detection of magnetic fields in a compact rectangular package made of plastic/epoxy material.

SS461R

Honeywell Sensing And Control

SS461R by Honeywell is a magnetic field sensor with 3-24V supply voltage range, -40 to 150°C operating temperature, and 20mA output current. Ideal for applications requiring precise digital current output in a compact rectangular package.

S-5712ANDL2-M3T1U

Seiko Instruments Usa

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; Output Range: 0.4V; Minimum Operating Temperature: -40 Cel;