CY7C65213-32LTXI by Infineon Technologies

Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

All prices are in USD

Bulk

QTY	Unit Price	Ext Price
54	$1.398	$75.514

CY7C65213-32LTXI

Manufacturer

Infineon Technologies
Manufacturer's Part Number

CY7C65213-32LTXI
Description

BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
Datasheet

Datasheet

54 In Stock

Popular Products

2N2222A

General Diode

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

NUP2105LT1G

Onsemi

NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.

Details

2N7002,215

NXP Semiconductors

2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.

Details

B340A-13-F

Diodes Incorporated

B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.

Details

ULN2803A

STMicroelectronics

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;

Details

M39029/56351

Souriau-sunbank Connection Technologies

Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.

Details

BSS138PS,115

NXP Semiconductors

NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.

Details

SMBJ18CA

Sangdest Microelectronics (Nanjing)

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

NE555D

STMicroelectronics

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

SS495ASP

Micro Switch

The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.

Details

1N4148WS

Jiangsu Changjiang Electronics Technology

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Gulf Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BAT54SLT1G

Onsemi

BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.

Details

OPA2277UA/2K5

Texas Instruments

OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.

Details

INA826AIDGKR

Texas Instruments

INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.

Details

1N4148

Semiconductors

RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;

Details

LL4148

Goodwork Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

DS18B20Z+

Analog Devices

DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.

Details

EPCS4SI8N

Altera

CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;

Details

LM78L05ACMX/NOPB

Texas Instruments

LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.

Details

CY7C65213-32LTXI Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	4.35 V
Package Body Material:	UNSPECIFIED
Nominal Supply Voltage:	5 V
Maximum Time At Peak Reflow Temperature (s):	30
Maximum Seated Height:	1 mm
Surface Mount:	YES
Maximum Supply Current:	18 mA
Terminal Finish:	NICKEL PALLADIUM GOLD
No. of Terminals:	32
Terminal Position:	QUAD
Package Style (Meter):	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
Maximum Data Transfer Rate:	1.5 MBps
Technology:	CMOS
JESD-30 Code:	S-XQCC-N32
Package Shape:	SQUARE
Terminal Form:	NO LEAD
Maximum Operating Temperature:	85 Cel
Package Code:	HVQCCN
Width:	5 mm
Moisture Sensitivity Level (MSL):	3
Peripheral IC Type:	BUS CONTROLLER, UNIVERSAL SERIAL BUS
Drive Interface Standard:	RS232; RS422; RS485
Maximum Supply Voltage:	5.25 V
JESD-609 Code:	e4
Minimum Operating Temperature:	-40 Cel
Qualification:	Not Qualified
Package Equivalence Code:	LCC32,.2SQ,20
Length:	5 mm
Additional Features:	ALSO OPERATES AT 3.3 V TYP
Peak Reflow Temperature (C):	260
Bus Compatibility:	UART; VBUS
Terminal Pitch:	.5 mm
Temperature Grade:	INDUSTRIAL

Category Top Products

USB2514B-AEZG

Microchip Technology

USB2514B-AEZG by Microchip Tech is a BUS CONTROLLER with 36 terminals, operating at 3.3V. It supports I2C, SMBUS, and USB buses with a clock frequency of 24MHz. Ideal for applications requiring high-speed data transfer in commercial temperature range from 0 to 70°C.

CY7C68013A-128AXI

Infineon Technologies

CY7C68013A-128AXI by Infineon is a USB bus controller with 16-bit address bus, 8-bit external data bus, and 48 MHz clock frequency. It is used in applications requiring high-speed data transfer up to 60 MBps, such as I2C, UART, and USB peripherals. The package style is flatpack with low profile and fine pitch terminals for compact designs.

USB3300-EZK-TR

Microchip Technology

The Microchip Technology USB3300-EZK-TR is a Bus Controller with 32 terminals, operating at 3.3V nominal voltage and supporting USB bus compatibility. It has a max clock frequency of 24MHz, operates b/w -40 to 85°C, and features a compact square package suitable for various applications requiring high-speed USB connectivity.

JHL6540SLLSM

Intel

BUS CONTROLLER, PCI; Technology: CMOS; Package Body Material: UNSPECIFIED; Maximum Operating Temperature: 65 Cel; Minimum Operating Temperature: 0 Cel; Bus Compatibility: PCI, USB;

USB2507-ADT

Standard Microsystems

BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 80; Package Code: LFQFP; Package Shape: SQUARE;

FT232HPQ-REEL

FTDI

FTDI's FT232HPQ-REEL is a bus controller with 40 MBps data transfer rate, compatible with I2C, SPI, UART, and USB. Operating temperature ranges from -40 to 85 °C, with a supply voltage of 1.08-1.32 V. Ideal for applications requiring high-speed communication in compact spaces.

GL850G-MNG21

Genesys Logic

GL850G-MNG21 by Genesys Logic is a bus controller with a max data transfer rate of 60 MBps. It is used for USB applications and has a square package, with a width and length of 7 mm. Its terminal pitch is 0.5 mm and it operates at temperatures b/w 0 to 70 °C.

USB2517-JZX-TR

Microchip Technology

Microchip Technology's USB2517-JZX-TR is a 64-terminal bus controller with a max data transfer rate of 60 MBps. It operates b/w 0 to 70 °C and supports I2C, SMBUS, and USB buses. Ideal for applications requiring high-speed universal serial bus connectivity in commercial-grade environments.

MAX3421EETJ+

Maxim Integrated

BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;

PCI9030-AA60PI

Plx Technology

PCI9030-AA60PI by Plx Technology is a 32-bit bus controller with 240 MBps data transfer rate and 60 MHz clock frequency. It is used in PCI bus systems, featuring 3.3V supply voltage and quad-terminal position for high-speed data processing applications.

USB5537B5000AKZETR

Microchip Technology

Microchip Technology's USB5537B5000AKZETR is a BUS CONTROLLER with 625 MBps data rate, 25 MHz clock frequency, and 1.31 V max supply voltage. Ideal for I2C, SMBUS, SPI, and USB bus compatibility applications in commercial-grade environments.

CYUSB2014-BZXI

Cypress Semiconductor

BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 121; Package Code: TFBGA; Package Shape: SQUARE;

PEX8619-BA50BIG

Broadcom

Broadcom's PEX8619-BA50BIG is a bus controller with 324 terminals, operating at -40 to 85°C. It supports I2C, PCI, SMBUS, SPI, and USB buses. The CMOS technology chip has a voltage range of 0.95V to 1.05V and uses a grid array package style for industrial applications.

TUSB8041IPAPRQ1

Texas Instruments

TUSB8041IPAPRQ1 by Texas Instruments is a 64-terminal BUS CONTROLLER IC with CMOS technology. It operates at a clock frequency of 24 MHz, compatible with I2C and SMBUS buses. Suitable for industrial applications, it has a temperature range from -40 to 85 °C and supports a supply voltage b/w 0.99V to 1.26V.

PCI9030-AA60PIF

Plx Technology

BUS CONTROLLER, PCI; Terminal Form: GULL WING; No. of Terminals: 176; Package Code: QFP; Package Shape: SQUARE; Maximum Clock Frequency: 60 MHz;

USB7052NT/KDX

Microchip Technology

The Microchip Technology USB7052NT/KDX is a BUS CONTROLLER IC with 100 terminals, operating at 1.08-1.32 V and up to 25 MHz clock frequency. It supports I2C, I2S, SMBUS, SPI, UART, and USB buses for high-speed data transfer applications in various electronic devices.

USB5742/2G

Microchip Technology

USB5742/2G by Microchip Tech is a BUS CONTROLLER with 625 MBps data rate, 25 MHz clock freq. It's a CMOS tech IC for I2C, SMBUS, SPI & USB bus compatibility. Operating temp range: 0-70 °C; Supply voltage: 1.08-1.32 V; Package style: CHIP CARRIER, HEAT SINK/SLUG.

USB2514B-AEZC-TR

Standard Microsystems

BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: OTHER; Package Code: HVQCCN; Nominal Supply Voltage: 3.3 V; Additional Features: ALSO REQUIRES 3.3V SUPPLY; Bus Compatibility: I2C;

STUSB1600AQTR

STMicroelectronics

STUSB1600AQTR by STMicroelectronics is a BUS CONTROLLER IC with 24 terminals, operating voltage range of 4.1V to 22V, and I2C bus compatibility. It has a compact square package style suitable for industrial applications requiring USB communication at temperatures ranging from -40°C to 105°C.

FT2232HL-REEL

FTDI

FTDI's FT2232HL-REEL is a bus controller with 64 terminals, supporting 1.8V and 3.3V power supplies. It has an external data bus width of 8 bits and operates at a max clock frequency of 12MHz. Ideal for industrial applications requiring USB connectivity on devices compatible with the 8048 and 8051 buses.