Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

BTS724G

Manufacturer

Infineon Technologies
Manufacturer's Part Number

BTS724G
Description

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR; Built-in Protections: TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE;
Datasheet

Datasheet

Not In Stock

Popular Products

BSS138

Taitron Components

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;

Details

EPCS4SI8N

Intel

EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.

Details

1N4148

Microsemi

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

NC7WZ17P6X

Onsemi

The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.

Details

2N7002

Itt Semiconductor

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;

Details

ERJ3EKF1002V

Panasonic

Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.

Details

SMMBT2222ALT1G

Onsemi

SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.

Details

2N2222A

Texas Instruments

2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).

Details

1N4148WS

Cheng-yi Electronic

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ATMEGA328P-AU

Microchip Technology

ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.

Details

BAV99

Gec Plessey Semiconductors

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Tt Electronics Plc

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;

Details

1N4148

Diotec Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM317T

Onsemi

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;

Details

SMBJ18CA

Mde Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Formosa Microsemi

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM358N

Freescale Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Protek Devices

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

FDV304P

Fairchild Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;

Details

LM358N

Philips Semiconductors

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

BTS724G Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	5.5 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	12 V
Maximum Seated Height:	2.65 mm
Maximum Output Current:	.002 A
Sub-Category:	Peripheral Drivers
Surface Mount:	YES
Terminal Finish:	TIN
No. of Terminals:	20
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
Screening Level:	AEC-Q100
Technology:	MOS
JESD-30 Code:	R-PDSO-G20
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Built-in Protections:	TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE
Package Code:	SOP
Interface IC Type:	BUFFER OR INVERTER BASED PERIPHERAL DRIVER
Width:	7.6 mm
Turn-off Time:	270 us
Moisture Sensitivity Level (MSL):	3
Driver No. of Bits:	4
Maximum Supply Voltage:	40 V
Turn-on Time:	250 us
Nominal Output Peak Current Limit:	7.3 A
JESD-609 Code:	e3
No. of Functions:	4
Qualification:	Not Qualified
Package Equivalence Code:	SOP20,.4
Output Current Flow Direction:	SINK
Length:	12.8 mm
Peak Reflow Temperature (C):	260
Terminal Pitch:	1.27 mm
Power Supplies (V):	12

Category Top Products

L293B

STMicroelectronics

L293B by STMicroelectronics is a 16-terminal peripheral driver with a max supply voltage of 36V. It features built-in protections for over current and thermal issues, making it ideal for applications requiring a true output polarity and nominal output peak current limit of 2A. The technology used is bipolar with an interface IC type of half bridge based peripheral driver.

LM3526M-L/NOPB

National Semiconductor

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

MIC2026-1YM

Micrel

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

BTS142DATMA1

Infineon Technologies

BTS142DATMA1 by Infineon Technologies is a MOS technology peripheral driver with built-in protections for transient, over current, over voltage, and thermal issues. It has a nominal voltage of 12V and a nominal output peak current limit of 45A. This small outline package driver is ideal for applications requiring sink output current flow direction.

ULN2803CDWR

Texas Instruments

ULN2803CDWR by Texas Instruments is an 8-function peripheral driver with open-collector output characteristics. It has built-in transient protections and a nominal output peak current limit of 0.5A, making it ideal for applications requiring sink current flow direction such as motor control systems.

VNH5180ATR-E

STMicroelectronics

VNH5180ATR-E by STMicroelectronics is a HALF BRIDGE BASED PERIPHERAL DRIVER with Matte Tin finish. It has a max reflow temp of 260°C and MSL level of 3. Ideal for applications requiring SINK output current flow direction in SMALL OUTLINE package.

BTT60101ERAXUMA1

Infineon Technologies

BTT60101ERAXUMA1 by Infineon Technologies is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates at a nominal voltage of 28V and has a max supply voltage of 36V. With a turn-on time of 150us, it is commonly used in automotive applications due to its AEC-Q100 screening level.

ULN2803A

YOUTAI SEMICONDUCTOR CO LTD

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;

BTS500151TADATMA2

Infineon Technologies

BTS500151TADATMA2 by Infineon is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates at a nominal voltage of 13.5V and has a max output peak current limit of 39A. This small outline package is ideal for automotive applications requiring reliable performance under harsh conditions.

VN340SP(8933)

STMicroelectronics

STMicroelectronics' VN340SP(8933) is a 1A peripheral driver with 24V nominal voltage. It features 10 terminals, matte tin finish, and gull wing form. Ideal for applications requiring high output current in small outline packages.

BTS712N1XUMA1

Infineon Technologies

BTS712N1XUMA1 by Infineon Technologies is a peripheral driver with a max supply voltage of 34V. It offers built-in protections for transient, over current, over voltage, thermal, and under voltage conditions. This small outline MOS technology device has a nominal output peak current limit of 0.3A and is commonly used as a buffer or inverter based peripheral driver.

HCPL-316J

Agilent Technologies

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

ITS4090QEPDXUMA1

Infineon Technologies

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Finish: TIN; Moisture Sensitivity Level (MSL): 2A; JESD-609 Code: e3;

PTPS22919DCKR

Texas Instruments

PTPS22919DCKR by Texas Instruments is a 6-terminal peripheral driver with built-in transient, over current, and thermal protections. It operates in industrial temperature range (-40 to 105°C) and has a nominal output peak current limit of 3A. Ideal for applications requiring sink output current flow direction in a small outline package style.

NCP45520IMNTWG-L

Onsemi

NCP45520IMNTWG-L by Onsemi is a peripheral driver with 8 terminals, operating voltage range of 0.5V to 13.5V, and built-in protections for transient, over current, thermal, and under voltage conditions. It has a small outline package style with very thin profile suitable for industrial applications requiring sink output current flow direction at temperatures ranging from -40°C to 85°C.

IR2085STRPBF

Infineon Technologies

IR2085STRPBF by Infineon is a half bridge peripheral driver with built-in protections for transient, over current, and under voltage. It operates b/w -40 to 125 °C and has a nominal output peak current limit of 1 A. This small outline package is ideal for automotive applications requiring a supply voltage range of 10-15 V.

MIC94090YC6-TR

Micrel

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;

IMP803LG

Daily Silver Imp Microelectronics

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

L293D

STMicroelectronics

L293D by STMicroelectronics is a peripheral driver with 2 functions, operating at a max supply voltage of 36V. It features built-in transient and thermal protections, suitable for applications requiring true output polarity and standard input characteristics. With a nominal output peak current limit of 1.2A, this half bridge-based peripheral driver is ideal for various electronic projects.

ISP772TXT

Infineon Technologies

Infineon Technologies' ISP772TXT is a Peripheral Driver with built-in protections for transient, over current, and over voltage. It operates b/w -30 to 85 °C with a supply voltage range of 5-34 V. Ideal for applications requiring a small outline package style and sink output current flow direction.