Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

BTS721L1

Manufacturer

Infineon Technologies
Manufacturer's Part Number

BTS721L1
Description

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR; No. of Functions: 4;
Datasheet

Datasheet

Not In Stock

Popular Products

1N4148WS

Surge Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

SPC TECHNOLOGY/ MULTICOMP

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LL4148

Promax-johnton

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BAV99-7-F

Diodes Incorporated

Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.

Details

2N2222A

Tt Electronics Plc

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;

Details

LM7805CT

Comset Semiconductors

Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;

Details

OPA2227UA

Texas Instruments

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

Details

BSS138

General Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;

Details

LM317AEMP/NOPB

Texas Instruments

LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.

Details

CRG0805F10R

TE Connectivity

TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.

Details

1N4148W-7-F

Diodes Incorporated

1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.

Details

USB2514BI-AEZG

Standard Microsystems

BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;

Details

MS3V-T1R32.768KHZ+/-20PPM12.5PF

Golledge Electronics

MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.

Details

LL4148

Diodes Incorporated

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

2N7002-T1-E3

Vishay Intertechnology

Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.

Details

LM555CMX

Texas Instruments

LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.

Details

LL4148-GS08

Vishay Intertechnology

The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.

Details

CRGCQ0805F10K

TE Connectivity

TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.

Details

MBR0540T1G

Onsemi

MBR0540T1G by Onsemi is a Schottky rectifier diode with max. forward voltage of 0.62V and max. output current of 0.5A, ideal for applications requiring high efficiency power conversion in small outline packages. Operating temp range: -55 to 150°C, with peak reflow temp at 260°C, making it suitable for various electronic devices needing reliable rectification performance in compact designs.

Details

1N4148WS

General Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BTS721L1 Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	5 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	12 V
Maximum Seated Height:	2.65 mm
Maximum Output Current:	.01 A
Sub-Category:	Peripheral Drivers
Surface Mount:	YES
Terminal Finish:	TIN
No. of Terminals:	20
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
Screening Level:	AEC-Q100
Technology:	MOS
JESD-30 Code:	R-PDSO-G20
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Built-in Protections:	TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE
Package Code:	SOP
Interface IC Type:	BUFFER OR INVERTER BASED PERIPHERAL DRIVER
Width:	7.6 mm
Turn-off Time:	400 us
Moisture Sensitivity Level (MSL):	3
Driver No. of Bits:	4
Maximum Supply Voltage:	34 V
Turn-on Time:	400 us
Nominal Output Peak Current Limit:	9.8 A
JESD-609 Code:	e3
No. of Functions:	4
Qualification:	Not Qualified
Package Equivalence Code:	SOP20,.4
Output Current Flow Direction:	SINK
Length:	12.8 mm
Peak Reflow Temperature (C):	260
Terminal Pitch:	1.27 mm
Power Supplies (V):	5/34

Category Top Products

SN754410NEE4

Texas Instruments

SN754410NEE4 by Texas Instruments is a 16-terminal peripheral driver with 2 functions. It operates b/w -40 to 85 °C, supporting a max supply voltage of 36 V and output current up to 1 A. Ideal for industrial applications requiring true output polarity and built-in transient/thermal protections.

MAX845ESA+

Analog Devices

MAX845ESA+ by Analog Devices is a CMOS technology-based peripheral driver with 8 terminals. It operates b/w -40 to 85°C, with supply voltage range of 4.5-5.5V. This small outline package IC is ideal for industrial applications requiring buffer or inverter based drivers.

L6201PS

STMicroelectronics

L6201PS by STMicroelectronics is a full bridge peripheral driver with 5A output current limit, suitable for applications requiring source and sink flow direction. It operates at supply voltages ranging from 12V to 48V, featuring built-in thermal protection. The small outline package with gull wing terminals makes it ideal for compact designs in various electronic systems.

ISP752RFUMA1

Infineon Technologies

ISP752RFUMA1 by Infineon Technologies is a peripheral driver with 8 terminals and built-in protections. It operates b/w -30 to 85 °C, with a supply voltage range of 6-52 V. Ideal for applications requiring a small outline package style and sink output current flow direction.

VN920SPTR-E

STMicroelectronics

STMicroelectronics' VN920SPTR-E is a peripheral driver with 36V max supply voltage, 30A max output current, and built-in protections. Ideal for applications requiring transient, over current, over voltage protection. Package style: small outline, heat sink/slug; interface IC type: buffer or inverter based peripheral driver.

BTS724G

Infineon Technologies

BTS724G by Infineon Technologies is a MOS technology peripheral driver with 4 functions, built-in protections, and a max supply voltage of 40V. It is used in automotive applications for controlling power supplies at 12V, offering overcurrent, overvoltage, thermal protection, and transient suppression. The driver has a small outline package style with dual terminals and Gull Wing terminal form for efficient performance in compact spaces.

VNQ660SP

STMicroelectronics

VNQ660SP by STMicroelectronics is a peripheral driver with a max supply voltage of 36V and built-in protections for transient, over current, over voltage, thermal, and under voltage. It has a max output current of 6A and turn-on time of 70μs. Ideal for applications requiring high-current switching in automotive systems.

TPS4H160BQPWPRQ1

Texas Instruments

TPS4H160BQPWPRQ1 by Texas Instruments is a Peripheral Driver with 4 functions, operating at -40 to 125 °C. It features built-in protections for transient, over current, thermal, and under voltage scenarios. Ideal for automotive applications due to its AEC-Q100 screening level and high side driver capability.

FDC6324L_NL

Fairchild Semiconductor

Fairchild Semiconductor's FDC6324L_NL is a Peripheral Driver with 6 terminals, 3/20V power supplies, and built-in transient protection. It features a small outline package style for compact designs. Ideal for applications requiring buffer or inverter-based peripheral drivers with source current flow direction.

VNB14N0413TR

STMicroelectronics

VNB14N0413TR by STMicroelectronics is a peripheral driver with a max output peak current limit of 14A. It has built-in protections for transient, over current, and thermal issues. This MOS technology-based device is commonly used as a buffer or inverter based peripheral driver.

TBD62783APG

Toshiba

Toshiba's TBD62783APG is a Peripheral Driver with 8 functions, operating at -40 to 85°C. It has a max supply voltage of 50V and built-in transient protection. Ideal for industrial applications requiring a true output polarity and standard input characteristics.

VNQ5160K-E

STMicroelectronics

STMicroelectronics' VNQ5160K-E is a 4-function peripheral driver with built-in protections. It operates on power supplies ranging from 8V to 36V, offering a turn-on/off time of 15us. This small outline package is ideal for applications requiring source output current flow direction and interface IC type as buffer or inverter based peripheral driver.

UDN-2987A

Sprague Electric

Sprague Electric's UDN-2987A is a bipolar peripheral driver with 8 bits. It has a max output current of 0.35 A and operates b/w -20°C to 85°C. The package style is in-line with 20 terminals, making it suitable for various electronic applications.

MAX845ESA-T

Maxim Integrated

MAX845ESA-T by Maxim Integrated is an 8-terminal peripheral driver with a supply voltage range of 4.5V to 5.5V, suitable for industrial applications. It features a peak current limit of 1A, Gull Wing terminal form, and operates in temperatures from -40°C to 85°C. Ideal for buffer or inverter-based systems requiring source and sink output current flow control.

A2982SLW

Allegro MicroSystems

Allegro MicroSystems' A2982SLW is a small outline peripheral driver with 8 functions, operating at -20 to 85°C. It has a max output current of 0.35A and built-in transient protection, suitable for buffer or inverter applications requiring a supply voltage range of 5-50V.

ULN2004ADRG3

Texas Instruments

ULN2004ADRG3 by Texas Instruments is a 7-function peripheral driver with built-in transient protection. It operates b/w -20 to 70°C, with a max supply voltage of 8V and current of 1.35mA. Ideal for applications requiring buffer or inverter-based interface ICs in compact spaces due to its small outline package style.

TLE6220GP

Infineon Technologies

TLE6220GP by Infineon is a 20-terminal MOS driver with built-in protections for transient, over current, and over voltage. Operating at 5V with a max output current of 3A, it's ideal for automotive applications due to its AEC-Q100 screening level and small outline package style. With a turn-on/off time of 10us and sink output flow direction, it offers reliable performance in harsh environments.

AUIPS6041GTR

International Rectifier

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

BTS5210G

Infineon Technologies

BTS5210G by Infineon is a MOS technology peripheral driver with 2 functions, operating at 5.5-40V. It offers built-in protections against transient, over current, and over voltage. Ideal for automotive applications due to AEC-Q100 screening level and small outline package style.

FSFR2100XS

Fairchild Semiconductor

HALF BRIDGE BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 9; Package Shape: RECTANGULAR; Terminal Position: ZIG-ZAG; Package Body Material: PLASTIC/EPOXY;