Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

BAT15-124P

Manufacturer

Infineon Technologies
Manufacturer's Part Number

BAT15-124P
Description

MIXER DIODE; Terminal Position: UNSPECIFIED; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Datasheet

Datasheet

Not In Stock

Popular Products

1N4148WSF-7

Diodes Incorporated

1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.

Details

SS14

Jgd Semiconductors

RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;

Details

BAV99

Electronic Devices

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Synsemi

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ERJ2RKF1002X

Panasonic

Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.

Details

2N2222A

Philips Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

PAP-06V-S

J S T Mfg

PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.

Details

BSS138

Weitron Technology

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;

Details

1N4148

Semitronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N7002

Silicon Standard

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;

Details

1N4148

NXP Semiconductors

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SMBJ18CA

Lite-on Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

FDV304P

Onsemi

The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.

Details

OPA2277UA

Texas Instruments

OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.

Details

2N2222A

Microsemi

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;

Details

SS14

SPC TECHNOLOGY/ MULTICOMP

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

EU2B-YS3203F

Idec

ROTARY SWITCH;

Details

LM7805CT

Texas Instruments

LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.

Details

SMBJ18CA

Vishay Intertechnology

Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.

Details

DRV5053VAQLPG

Texas Instruments

Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.

Details

BAT15-124P Technical Details

TYPE	DESCRIPTION
Package Body Material:	CERAMIC, METAL-SEALED COFIRED
Config:	SINGLE
Diode Type:	MIXER DIODE
Maximum Noise Figure:	9 dB
Sub-Category:	Microwave Mixer Diodes
Surface Mount:	YES
Diode Element Material:	SILICON
No. of Terminals:	2
Qualification:	Not Qualified
Terminal Position:	UNSPECIFIED
Maximum Diode Capacitance:	.22 pF
Package Style (Meter):	MICROWAVE
Technology:	SCHOTTKY
Schottky Barrier Type:	MEDIUM BARRIER
JESD-30 Code:	O-CXMW-G2
No. of Elements:	1
Package Shape:	ROUND
Maximum Power Dissipation:	.05 W
Terminal Form:	GULL WING
Additional Features:	HIGH RELIABILITY
Maximum Operating Temperature:	150 Cel

Category Top Products

DAN222M3T5G

Onsemi

DAN222M3T5G by Onsemi is a microwave mixer & detector diode with common cathode, 2 elements config. It has a max diode capacitance of 3.5 pF and operates at up to 150°C. Ideal for applications requiring small outline package style and high-speed performance in RF circuits.

HSMS-2852-BLKG

Broadcom

HSMS-2852-BLKG by Broadcom is a Schottky mixer diode with 2 elements, operating from 0.915 GHz to 4 GHz in L Band. It features a plastic/epoxy package, series connected configuration, and nickel palladium gold finish. Ideal for microwave applications requiring high-frequency mixing and detection capabilities.

BAT14-104H

Infineon Technologies

MIXER DIODE; Terminal Position: UNSPECIFIED; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

BAS70-07

NXP Semiconductors

MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 4; Surface Mount: YES; Package Shape: RECTANGULAR;

BAT17,215

NXP Semiconductors

MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

BAT14-094P

Infineon Technologies

MIXER DIODE; Terminal Position: UNSPECIFIED; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

HSMS-285CBLKG

Agilent Technologies

Agilent Technologies' HSMS-285CBLKG is a Schottky mixer diode with 2 elements, zero barrier Schottky technology, and L band frequency band. It features a plastic/epoxy package, dual terminal position, and tin finish. Ideal for microwave applications requiring series connected diodes in small outline rectangular package.

HSMS-2850

Broadcom

Broadcom's HSMS-2850 is a surface-mount microwave mixer diode with operating frequencies from 0.915 GHz to 5.8 GHz. It offers a min tangential signal sensitivity of 55 dBm, making it ideal for applications requiring high-frequency mixing and detection in temperature ranges from -65°C to 150°C.

BAT15-124

Infineon Technologies

MIXER DIODE; Terminal Position: UNSPECIFIED; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

SPD-221

Onsemi

MIXER DIODE; Surface Mount: YES; Maximum Operating Frequency: 18 GHz; Maximum Operating Temperature: 150 Cel; Diode Element Material: GALLIUM ARSENIDE; Minimum Operating Frequency: 3.9 GHz;

BAT17-04W

Infineon Technologies

MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

BAT68-03WE6327

Infineon Technologies

MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

1N6263-AZ1

STMicroelectronics

MIXER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

BAT14-098

Infineon Technologies

MIXER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Frequency: 12 GHz; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;

MMBD355LT3

Onsemi

MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

HSMS-2800-TR1G

Agilent Technologies

MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

SMS3922-079

Alpha Industries

MIXER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

BAT15-093P

Infineon Technologies

MIXER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

BAR19-AR1

STMicroelectronics

MIXER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

HSMS-285B-BLKG

Broadcom

HSMS-285B-BLKG by Broadcom is a Schottky mixer diode with a frequency range of 0.915 GHz to 4 GHz, ideal for L Band applications. It features a plastic/epoxy package, matte tin terminal finish, and operates at temperatures up to 150°C. Suitable for surface mount designs in microwave systems.