Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

All prices are in USD

Bulk

QTY	Unit Price	Ext Price
651	Request Pricing	-

BAT15-016

Manufacturer

Infineon Technologies
Manufacturer's Part Number

BAT15-016
Description

MIXER DIODE; Surface Mount: NO; Diode Element Material: SILICON; Maximum Noise Figure: 5.5 dB; Minimum Operating Frequency: 2 GHz; Maximum Operating Frequency: 4 GHz;
Datasheet

Datasheet

651 In Stock

Popular Products

OPA2277UA/2K5E4

Texas Instruments

OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.

Details

U.FL-R-SMT-1(10)

Hirose Electric

U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.

Details

BSS138PS,115

NXP Semiconductors

NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.

Details

2N7002

Yangzhou Yangjie Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;

Details

LM317T

Texas Instruments

LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.

Details

SMBJ18CA

Synsemi

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Surge Components

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

ULN2803A

Rochester Electronics

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;

Details

BAV99

Taitron Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002

Central Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;

Details

EU2B-YS2J03C

Idec

ROTARY SWITCH;

Details

1N4148WS

Rugao Dachang Electronic

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS84-7-F

SPC TECHNOLOGY/ MULTICOMP

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;

Details

RK73H2ATTD10R0F

Koa Speer Electronics

RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.

Details

SMBJ18CA

Weitron Technology

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

261

Micronetics

Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;

Details

1N4148

Unitrode

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BSS138

Jiangsu Changjiang Electronics Technology

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): .22 A; Package Shape: RECTANGULAR;

Details

BSS138K-13

Diodes Incorporated

BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.

Details

1N4148

Diotec Semiconductor Ag

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BAT15-016 Technical Details

TYPE	DESCRIPTION
Diode Element Material:	SILICON
Minimum Operating Frequency:	2 GHz
Diode Type:	MIXER DIODE
Maximum Noise Figure:	5.5 dB
Maximum Operating Frequency:	4 GHz
Sub-Category:	Microwave Mixer Diodes
Surface Mount:	NO

Category Top Products

HSMS-2852-TR1G

Broadcom

HSMS-2852-TR1G by Broadcom is a Schottky mixer diode with 2 elements, operating from 0.915 GHz to 4 GHz in L Band. It features a plastic/epoxy package, series connected configuration, and dual terminal position for microwave applications. The diode has a max operating temperature of 150°C and min of -65°C, making it suitable for high-frequency circuit designs.

BAR19-AR1

STMicroelectronics

BAR19-AR1 by STMicroelectronics is a single ultra high frequency mixer diode with 1 pF capacitance and 0.25 uA reverse current. It operates at a max temperature of 125 °C, suitable for microwave applications requiring Schottky technology and 30 A output current.

DB3X313N0L

Panasonic

The Panasonic DB3X313N0L is a Schottky mixer diode with 2 elements, common cathode config, and ultra high frequency band. It operates b/w -40 to 85°C, has max VF of 0.55V, and max output current of 0.13A. Ideal for microwave applications due to its small outline package style and dual terminal position.

STDD15-05W

STMicroelectronics

STDD15-05W by STMicroelectronics is a dual-element mixer diode designed for microwave applications. It features a max reverse voltage of 15V, low capacitance of 1pF, and operates up to 150 °C. Ideal for high-frequency signal processing in compact designs.

BAT14-073H

Infineon Technologies

MIXER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

BAT1707E6327XT

Infineon Technologies

BAT1707E6327XT by Infineon Technologies is a Schottky mixer diode with 2 elements, suitable for VHF to UHF frequencies. It has a max power dissipation of 0.15W and operates b/w -55°C to 125°C. The diode's package is small outline, surface mountable, with dual terminals ideal for microwave applications.

BAT14-123P

Infineon Technologies

MIXER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

BA683

NXP Semiconductors

MIXER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

SBL-122

Onsemi

SBL-122 by Onsemi is a surface mount mixer diode with GaAs element. It operates from 3.9 GHz to 12 GHz, ideal for microwave applications. With a max temp of 150 °C, it's suitable for high-frequency circuits in various electronic devices.

TMM6263FILM

STMicroelectronics

TMM6263FILM by STMicroelectronics is a single microwave mixer diode with a Schottky technology. It operates in the very high frequency to ultra high frequency band, featuring a max forward voltage of 1V and max output current of 15A. This glass-packaged diode is ideal for applications requiring high-frequency signal mixing and detection.

BAT1704WE6327XT

Infineon Technologies

MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

BAT68-06

Infineon Technologies

MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

BA423A153

NXP Semiconductors

MIXER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

HSMS-2822

Hewlett Packard

MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

HSMS-2850-TR2G

Broadcom

Broadcom's HSMS-2850-TR2G is a Schottky mixer diode with zero barrier technology. Operating from 0.915 GHz to 4 GHz, it comes in a small outline package suitable for L band applications. The diode has a max temperature of 150°C and features gull wing terminals for surface mounting.

BAT15-095S

Infineon Technologies

MIXER DIODE; Terminal Position: UNSPECIFIED; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: SQUARE;

BAT1502ELE6327XTMA1

Infineon Technologies

BAT1502ELE6327XTMA1 by Infineon is a single Schottky mixer diode with 0.24 pF capacitance, ideal for X Band applications. With a low barrier Schottky element and 0.41 V forward voltage, it operates b/w -55 to 150 °C. This chip carrier package has gold finish terminals and can handle up to 0.1 W power dissipation.

BAT15-044

Infineon Technologies

MIXER DIODE; Terminal Position: UNSPECIFIED; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

MA4E2037

M/a-com Technology Solutions

MIXER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

NSR15SDW1T2G

Onsemi

NSR15SDW1T2G by Onsemi is a Schottky mixer diode with 2 elements, featuring a max reverse voltage of 15V and forward voltage of 0.415V. It operates b/w -65 °C to 150°C, suitable for microwave applications requiring low diode capacitance (1pF) and low reverse current (0.05uA).