Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

All prices are in USD

Bulk

QTY	Unit Price	Ext Price
4,384	$89.737	$393,407.008

HMC1053

Manufacturer

Honeywell
Manufacturer's Part Number

HMC1053
Description

MAGNETIC FIELD SENSOR,MAGNETORESISTIVE; Mounting Feature: SURFACE MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: SQUARE; Minimum Range Of Magnetic Field: -.6 mT; Sensitivity (mV/G): 1 mV/G;
Datasheet

Datasheet

4384 In Stock

Popular Products

LM555CM

National Semiconductor

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

E8WSDC12-32.768KTR

Ecliptek

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;

Details

FDN306P

Onsemi

FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.

Details

NUP2105LT1G

Onsemi

NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.

Details

1N4148

Silicon Standard

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BSS138

NXP Semiconductors

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;

Details

SMBJ18CA

Hy Electronic

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

KSZ9031RNXIA

Microchip Technology

KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.

Details

CRCW080510K0FKEA

Vishay Intertechnology

Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.

Details

1N4148

Philips Components

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LL4148-GS08

Vishay Intertechnology

The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.

Details

LL4148

Itt Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LM317T

Fairchild Semiconductor

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;

Details

IRLML6402TRPBF

International Rectifier

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;

Details

1N4148

Microchip Technology

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

261

New England Microwave

Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;

Details

LL4148

Taitron Components

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LL4148

TDK

RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;

Details

LM358N

Intersil

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

LM317T

Bay Linear

Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;

Details

HMC1053 Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	1.8 V
Minimum Range Of Magnetic Field:	-.6 mT
Maximum Operating Current:	10 mA
Maximum Supply Voltage:	20 V
Output Type:	ANALOG VOLTAGE
Sensitivity (mV/G):	1 mV/G
Terminal Finish:	TIN LEAD
JESD-609 Code:	e0
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	SURFACE MOUNT
Resistance:	1000 ohm
Body Width:	3 inch
Sensors or Transducers Type:	MAGNETIC FIELD SENSOR,MAGNETORESISTIVE
Maximum Magnetic Field Range:	-.6 mT
Package Shape or Style:	SQUARE
Termination Type:	SOLDER
Linearity (%):	1.80
Body Height:	.9 mm
Additional Features:	RESOLUTION 120 MICRO GAUSS
Body Length/Diameter:	3 mm
Maximum Operating Temperature:	125 Cel

Category Top Products

STH17-0404

Sypris Test & Measurement

MAGNETIC FIELD SENSOR,HALL EFFECT;

DRV5055A1ELPGMQ1

Texas Instruments

DRV5055A1ELPGMQ1 by Texas Instruments is a magnetic field sensor with an output range of -1-1mA and analog current output type. It operates b/w -40 to 150°C, suitable for automotive applications due to AEC-Q100 screening level. With a max supply voltage of 3.63V and compact rectangular package style, it offers precise sensing in a small form factor.

ACS716KLATR-25CB-T

Allegro MicroSystems

ACS716KLATR-25CB-T by Allegro MicroSystems is a magnetic field sensor with 3-3.6V supply voltage, 0.75% linearity, and 11mA max current. Ideal for applications requiring Hall effect sensors in a compact rectangular package for surface mounting.

DRV5011ADDBZT

Texas Instruments

DRV5011ADDBZT by Texas Instruments is a magnetic field sensor with a supply voltage range of 2.5V to 5.5V and hysteresis of 4mT. It features a push-pull current output, operating temperature from -40°C to 135°C, and can detect magnetic fields ranging from -3.8mT to 3.8mT. Ideal for applications requiring precise magnetic field sensing in compact designs.

SS443A-T3

Honeywell Sensing And Control

SS443A-T3 by Honeywell is a magnetic field sensor with 3.8-30V supply, -40 to 150°C temp range, and 7.5-18mT magnetic field detection. It features a plastic housing, through-hole mounting, and open-collector output ideal for automotive and industrial applications.

A1308LLHLT-3-T

Allegro MicroSystems

MAGNETIC FIELD SENSOR,HALL EFFECT;

TLE4905LHALA1

Infineon Technologies

TLE4905LHALA1 by Infineon is a Hall effect magnetic field sensor with 24V max supply, 6mT hysteresis, and 8mA max operating current. Ideal for applications requiring digital current output in automotive systems, industrial automation, and consumer electronics due to its compact rectangular design and through-hole mounting feature.

HMC1043T/R

Honeywell Sensing And Control

Honeywell Sensing And Control's HMC1043T/R is a magnetic field sensor with 1.8V-20V supply voltage range, -40°C to 125°C operating temperature, and 1mV/G sensitivity. Ideal for applications requiring precise analog voltage output in a compact square package, such as automotive sensors or industrial automation systems.

SS343RT

Honeywell Sensing And Control

MAGNETIC FIELD SENSOR,HALL EFFECT;

DRV5032DUDBZT

Texas Instruments

Texas Instruments' DRV5032DUDBZT is a magnetic field sensor with 5.5V max supply voltage, 0.7 mT hysteresis, and 0-5.5V digital output range. Ideal for applications requiring precise magnetic field detection in a compact rectangular package.

AH3777-P-B

Diodes Incorporated

AH3777-P-B by Diodes Inc. is a Hall effect magnetic field sensor with 3-28V supply, -40 to 125°C temp range, and 30-55mA current output. Ideal for applications requiring precise magnetic field detection in industrial automation and automotive systems.

91SS12-2

Honeywell Sensing And Control

91SS12-2 by Honeywell is a magnetic field sensor with a max supply voltage of 18V and sensitivity of 0.2mV/G. It has an output range of 10mA, output type analog current, and operates on a min supply voltage of -0.5V. Ideal for applications requiring precise magnetic field detection in compact spaces due to its small body dimensions and through-hole mounting feature.

TLE49642MXTMA1

Infineon Technologies

Infineon's TLE49642MXTMA1 is a Hall effect magnetic field sensor with 32V max supply voltage, 5.5mT hysteresis, and 0-25mA output range. Ideal for applications requiring precise current output sensing in a compact rectangular package.

A31102LLUBTR-DD750

Allegro MicroSystems

MAGNETIC FIELD SENSOR,HALL EFFECT;

DRV5057A2EDBZRQ1

Texas Instruments

Texas Instruments' DRV5057A2EDBZRQ1 is a Hall effect magnetic field sensor with 3-3.63V supply voltage range, AEC-Q100 screening, and -40 to 150°C operating temperature. Ideal for applications requiring analog current output up to 20mA, such as automotive systems and industrial controls due to its compact rectangular package design.

US2881LSE-AAA-000-RE

Melexis N V

Melexis N V's US2881LSE-AAA-000-RE is a magnetic field sensor with 3 terminals, operating voltage range of 3.5V to 24V, and hysteresis of 6mT. Ideal for automotive applications due to TS16949 screening level, CMOS technology, and -40°C to 150°C temperature range suitability.

DRV5033AJQDBZRQ1

Texas Instruments

Texas Instruments' DRV5033AJQDBZRQ1 is a magnetic field sensor with hysteresis of 3.4 mT, operating temperature range from -40 to 125°C, and output current up to 30 A. Ideal for automotive applications due to AEC-Q100 screening level and unipolar input mode, it features a digital current output via open-drain interface.

AH1388-HK4-7

Diodes Incorporated

Magnetic Field Sensors; Terminal Finish: NICKEL PALLADIUM GOLD; JESD-609 Code: e4;

SS94B1

Micro Switch

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 1mA; Maximum Magnetic Field Range: 67 mT;

A1104EUA-T

Allegro MicroSystems

Allegro MicroSystems' A1104EUA-T is a Hall effect magnetic field sensor with 3 terminals, voltage output, and 24V max supply. With a hysteresis of 5.5mT and operating range up to 45mT, it's ideal for automotive applications requiring AEC-Q100 screening at temperatures from -40°C to 85°C.