Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

SS496A

Manufacturer

Honeywell Sensing And Control
Manufacturer's Part Number

SS496A
Description

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Linearity (%): 1.5;
Datasheet

Datasheet

Not In Stock

Popular Products

LL4148

Onsemi

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

DS18B20Z+

Analog Devices

DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.

Details

DS18B20

Dallas Semiconductor

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;

Details

DS18B20Z

Dallas Semiconductor

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;

Details

2N2222A

Micro Commercial Components

Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;

Details

SMBJ18CA

Silicon Standard

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MC7805CTG

Onsemi

MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.

Details

2N7002

Vishay Intertechnology

2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.

Details

CRCW080510R0FKEA

Vishay Intertechnology

Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.

Details

USB3320C-EZK-TR

Standard Microsystems

INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;

Details

USBLC6-2SC6

STMicroelectronics

USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.

Details

1N4148WS

Synsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WS

Weitron Technology

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Microsemi

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BAV99

Sangdest Microelectronics (Nanjing)

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Daco Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Grande Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

MMBT3906LT1G

Onsemi

MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.

Details

BAV99

Vishay Telefunken

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Protek Devices

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SS496A Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	4.5 V
Minimum Range Of Magnetic Field:	-84 mT
Other Names:	SS496A-ND 2266-SS496A 480-3595
Maximum Operating Current:	8.7 mA
Maximum Supply Voltage:	10.5 V
Output Type:	ANALOG CURRENT
Sensitivity (mV/G):	2.5 mV/G
Output Circuit Type:	TRANSISTOR
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	THROUGH HOLE MOUNT
Body Width:	1.57 inch
Sensors or Transducers Type:	MAGNETIC FIELD SENSOR,HALL EFFECT
No. of Terminals:	3
Package Equivalence Code:	SIP3,.1,50
Maximum Magnetic Field Range:	84 mT
Package Shape or Style:	RECTANGULAR
Termination Type:	PIN
Output (V):	OPEN-COLLECTOR
Linearity (%):	1.5
Body Height:	3 mm
Body Length/Diameter:	4.06 mm
Maximum Operating Temperature:	150 Cel

Category Top Products

AH1388-HK4-7

Diodes Incorporated

Magnetic Field Sensors; Terminal Finish: NICKEL PALLADIUM GOLD; JESD-609 Code: e4;

TLE4935LHALA1

Infineon Technologies

TLE4935LHALA1 by Infineon is a magnetic field sensor with 24V max supply voltage, 40mT hysteresis, and -40 to 150°C operating temp. Ideal for applications requiring digital current output in a compact rectangular package.

LIS2MDL

STMicroelectronics

STMicroelectronics' LIS2MDL is a magnetic field sensor with 1.71-3.6V supply voltage range, -40 to 85°C operating temperature, and digital voltage output. It is a Hall effect sensor in a square package suitable for surface mount applications in various industries like automotive and consumer electronics.

BMM150

Robert Bosch

BMM150 by Robert Bosch is a 3-axis magnetic field sensor with digital output. It operates b/w -40 to 85°C, with a magnetic field range of 1.2-2.5 mT. The sensor has I2C and SPI interfaces, suitable for surface mount applications in various industries.

AH180-PG-A

Diodes Incorporated

Diodes Inc.'s AH180-PG-A is a Hall Effect magnetic field sensor with 1.5mT hysteresis, 0.30V analog output range, and 6mT max magnetic field range. Ideal for applications requiring precise magnetic field detection in the -40 to 85°C temperature range.

AH3572-SA-7

Diodes Incorporated

MAGNETIC FIELD SENSOR,HALL EFFECT; Terminal Finish: MATTE TIN; JESD-609 Code: e3;

APS12230LUAA

Allegro MicroSystems

MAGNETIC FIELD SENSOR,HALL EFFECT;

S-5716ANSL3-M3T1U

Ablic

MAGNETIC FIELD SENSOR,HALL EFFECT; Terminal Finish: TIN; JESD-609 Code: e3;

A1309LLHLT-9-T

Allegro MicroSystems

MAGNETIC FIELD SENSOR,HALL EFFECT;

VF360NT

Honeywell Sensing And Control

The Honeywell Sensing And Control VF360NT is a magnetic field sensor with a supply voltage range of 3-24V. It operates in temperatures from -40 to 150°C, with a max output current of 20A. Ideal for applications requiring digital current output and detection of magnetic fields up to ±4.5mT.

HAL506SF-A

Micronas Semiconductor Holding Ag

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 0-20mA;

S-5716ACDL0-I4T1U

Seiko Instruments Usa

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; Output Range: 0.40-4.60V; Maximum Supply Voltage: 5.5 V;

DRV5055A3QLPG

Texas Instruments

DRV5055A3QLPG by Texas Instruments is a magnetic field sensor with a max supply voltage of 3.63V and an output range of -1-1mA. It is commonly used in applications such as automotive, industrial, and consumer electronics for measuring magnetic fields.

SS496A-SP

Honeywell Sensing And Control

SS496A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 1.5% linearity, and 2.5 mV/G sensitivity. Ideal for applications requiring precise magnetic field detection in a compact package, such as automotive sensors or industrial automation systems.

LTS25-NP

Lem International Sa

LTS25-NP by Lem International Sa is a magnetic field sensor with Hall effect technology. It operates b/w -40°C to 85°C, with supply voltage range of 4.75V to 5.25V. This rectangular sensor outputs analog voltage and is suitable for through hole mounting applications.

EQ-730L

Asahi Kasei Microdevices

EQ-730L by Asahi Kasei Microdevices is a Hall effect magnetic field sensor with 3-5.5V supply, -40 to 100°C operating temp, and 1A max output current. Ideal for applications requiring precise analog current output in a compact rectangular plastic housing.

SS551AT

Honeywell Sensing And Control

MAGNETIC FIELD SENSOR,HALL EFFECT;

CLSM-50LA

Sypris Test & Measurement

CLSM-50LA by Sypris Test & Measurement is a Hall effect magnetic field sensor with 0.1% linearity, operating b/w -40°C to 85°C. It has a max output current of 50A and operates on analog current output type. With dimensions of 18" x 30.1mm x 45.5mm, it is ideal for applications requiring precise magnetic field measurements in industrial settings.

A1102ELHLT-T

Allegro MicroSystems

Allegro MicroSystems' A1102ELHLT-T is a magnetic field sensor with 24V max supply voltage, -40 to 85°C operating temp range, and 5.5mT hysteresis. Ideal for automotive applications due to AEC-Q100 screening level, BICMOS technology, and compact rectangular package design.

DRV5013ADQDBZRQ1

Texas Instruments

DRV5013ADQDBZRQ1 by Texas Instruments is a magnetic field sensor with 5.4 mT hysteresis, 0-30mA current output range, and -40 to 125°C operating temperature. Ideal for automotive applications due to AEC-Q100 screening level, it features a latched bipolar input mode and open-drain output interface.