Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

SS443R

Manufacturer

Honeywell Sensing And Control
Manufacturer's Part Number

SS443R
Description

MAGNETIC FIELD SENSOR,HALL EFFECT;
Datasheet

Datasheet

Not In Stock

Popular Products

1N4148WS

Onsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

FDLL4148

Onsemi

FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.

Details

INA826AIDGKR

Texas Instruments

INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.

Details

BSS138

Panjit International

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;

Details

CSNF651

Honeywell Sensing And Control

CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.

Details

BAT54SLT1G

Onsemi

BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.

Details

SMBJ18CA

Dc Components

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Temic Semiconductors

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

ESD5Z5.0T1G

Onsemi

ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.

Details

M24308/2-1F

Bel Fuse

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;

Details

LM107H/883C

Rochester Electronics

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;

Details

SMBJ18CA

Secos

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SSL-LXA228SRC-TR11

Lumex

SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.

Details

CRCW040210K0FKED

Vishay Intertechnology

Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.

Details

ISO1050DUBR

Texas Instruments

ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.

Details

SS14

Onsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Plessey Semiconductors Discrete Components Div

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Cheng-yi Electronic

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148

Vishay Telefunken

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

B340A-13-F

Diodes Incorporated

B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.

Details

SS443R Technical Details

TYPE	DESCRIPTION
Sensors or Transducers Type:	MAGNETIC FIELD SENSOR,HALL EFFECT

Category Top Products

DRV5053EAQLPGMQ1

Texas Instruments

DRV5053EAQLPGMQ1 by Texas Instruments is a magnetic field sensor with a supply voltage range of 2.7V to 38V and operating temperatures from -40°C to 125°C. It offers a current output range of 0-2.3mA, making it ideal for automotive applications requiring precise magnetic field sensing in harsh environments compliant with AEC-Q100 standards.

MMC34160PJ

Memsic

MMC34160PJ by Memsic is a MAGNETIC FIELD SENSOR with 1.6mm body width, 0.72mm height, and digital voltage output. It operates b/w -40°C to 85°C, has a supply voltage range of 1.62V to 3.6V, and uses a 2-wire interface for applications in various industries like automotive and consumer electronics.

A1222LLHLX-T

Allegro MicroSystems

Allegro MicroSystems' A1222LLHLX-T is a Hall effect magnetic field sensor with 3-24V supply, -40 to 150°C operating temp, and 22mT hysteresis. Ideal for current output applications in automotive systems, industrial controls, and consumer electronics due to its compact rectangular design and surface mount capability.

A1260LLHLX-T

Allegro MicroSystems

Allegro MicroSystems' A1260LLHLX-T is a magnetic field sensor with 3-24V power supply, -40 to 150°C operating temp, and 5mT hysteresis. Ideal for automotive applications due to AEC-Q100 screening level, open-drain output circuit, and BICMOS technology.

TLE49461LHALA1

Infineon Technologies

TLE49461LHALA1 by Infineon is a magnetic field sensor with 18V max supply voltage, 30mT hysteresis, and 0-20mA output range. Ideal for applications requiring digital current output in environments ranging from -40 to 150°C.

DRV5033AJQLPGQ1

Texas Instruments

DRV5033AJQLPGQ1 by Texas Instruments is a magnetic field sensor with hysteresis of 3.4 mT, operating temperature range from -40 to 125°C, and output current up to 30 A. Ideal for automotive applications requiring precise digital current output in a compact rectangular package.

TLE4997A8DXUMA1

Infineon Technologies

TLE4997A8DXUMA1 by Infineon is a magnetic field sensor with 4.5-5.5V supply voltage range, -40 to 125°C operating temperature, and -50 to 200mT magnetic field range. It outputs digital current in the range of -1.0-1.0mA and can handle up to 10mA current output, making it ideal for applications requiring precise magnetic field measurements in compact spaces like automotive sensors or industrial automation systems.

AH372-P-B

Diodes Incorporated

AH372-P-B by Diodes Inc. is a Hall Effect magnetic field sensor with 2.2V to 20V supply voltage range, -40°C to 125°C operating temperature, and ±6mT magnetic field range. It outputs digital voltage and has a hysteresis of 6mT. Ideal for applications requiring precise magnetic field detection in compact spaces.

A1309LLHLX-9-T

Allegro MicroSystems

Allegro MicroSystems' A1309LLHLX-9-T is a magnetic field sensor with 4.5-5.5V supply voltage range, -40 to 150°C operating temperature, and 9mV/G sensitivity. Ideal for applications requiring precise analog voltage output based on magnetic field strength in compact dimensions of 1.91" x 2.98mm for surface mount installations.

HMC1021Z-RC

Honeywell Sensing And Control

Honeywell Sensing And Control's HMC1021Z-RC is a magnetic field sensor with 8 terminals, operating b/w -40 to 125°C. It has a range of -0.6mT to 0.6mT and requires a supply voltage of 2-12V. Ideal for applications requiring precise magnetic field detection in various environments.

TLE49681LHALA1

Infineon Technologies

TLE49681LHALA1 by Infineon is a magnetic field sensor with 3-32V supply, 2mT hysteresis, and 0-25mA current output. Ideal for applications requiring precise magnetic field detection in automotive and industrial sectors.

AH49HNTR-G1

Diodes Incorporated

AH49HNTR-G1 by Diodes Inc. is a Hall effect magnetic field sensor with 3-8V supply, 3-terminals, and 105°C max temp. Ideal for detecting magnetic fields in automotive applications due to its voltage output, -40 to 105°C operating range, and surface mounting feature.

A1324LUA-T

Allegro MicroSystems

Allegro MicroSystems A1324LUA-T is a magnetic field sensor with 5V supply, 1.5% linearity, and 5000mV/G sensitivity. Ideal for applications requiring precise analog voltage output in temperatures ranging from -40 to 150°C. Features single-ended output circuit and BICMOS technology for accurate measurements.

HAL506UA-A

Micronas Semiconductor Holding Ag

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 0-20mA;

HAL2420UT-A

Micronas Semiconductor Holding Ag

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; Output Type: CURRENT OUTPUT; Package Shape or Style: RECTANGULAR; Output Range: -1.2-1.2mA; Body Length/Diameter: 4.06 mm;

DRV5056Z4QDBZT

Texas Instruments

Texas Instruments' DRV5056Z4QDBZT is a magnetic field sensor with 3 terminals, operating from -40 to 125°C. It has a supply voltage range of 3-5.5V and output current up to 1A, suitable for Hall effect applications in various industries. The sensor outputs an analog current within the -1-1mA range, featuring a unipolar input mode and surface mounting feature.

DRV5055A3QDBZR

Texas Instruments

DRV5055A3QDBZR by Texas Instruments is a magnetic field sensor with a supply voltage range of 3-3.63V and operating temperature from -40 to 125°C. It features an output current range of -1-1mA, making it suitable for applications requiring precise analog current output in a compact rectangular package for surface mount installations.

SS466A-T3

Honeywell Sensing And Control

MAGNETIC FIELD SENSOR,HALL EFFECT; Power Supplies (V): 3.8/30;

TLE4964-3K

Infineon Technologies

TLE4964-3K by Infineon Tech. is a magnetic field sensor with 32V max supply voltage, 3mT hysteresis, and 0-25mA output range. Ideal for applications requiring current output sensing in a compact rectangular package, such as automotive systems and industrial automation.

HMC1022-TR

Honeywell

MAGNETIC FIELD SENSOR,MAGNETORESISTIVE; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Shape or Style: RECTANGULAR; Maximum Magnetic Field Range: .6 mT; Maximum Supply Voltage: 12 V;