CSNB131 by Honeywell Sensing And Control

Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

CSNB131

Manufacturer

Honeywell Sensing And Control
Manufacturer's Part Number

CSNB131
Description

Other Sensors/Transducers; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Output (V): SINGLE-ENDED; Maximum Operating Temperature: 70 Cel; Package Equivalence Code: MODULE,3LEAD,1.0;
Datasheet

Datasheet

Not In Stock

Popular Products

LM7805CT

Onsemi

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;

Details

1N4148WS

Fairchild Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SN65HVD234DR

Texas Instruments

SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.

Details

BAV99

Jgd Semiconductors

RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;

Details

KSZ9031RNXIC

Microchip Technology

KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.

Details

2N7002,215

NXP Semiconductors

2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.

Details

1N4148

Shenzhen Yixinsemi Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

AT90CAN128-16AU

Microchip Technology

AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.

Details

SS14+

Multicomp Pro

SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.

Details

BSS138-TP

Micro Commercial Components

BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.

Details

SMBJ18CA

Vishay Intertechnology

Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.

Details

SMBJ18CA

Silicon Standard

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WT

Onsemi

1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.

Details

LM358N

National Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

LL4148

Silicon Standard

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

1N4148

Surge Components

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LD1117S33CTR

STMicroelectronics

STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.

Details

1N4148

General Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SS14

Changzhou Starsea Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WS

First Components International

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

CSNB131 Technical Details

TYPE	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
No. of Terminals:	3
Package Equivalence Code:	MODULE,3LEAD,1.0
Output (V):	SINGLE-ENDED
Maximum Operating Temperature:	70 Cel
Sub-Category:	Other Sensors/Transducers
Output Circuit Type:	SINGLE-ENDED
Minimum Operating Temperature:	0 Cel
Power Supplies (V):	+-15

Category Top Products

ACS714ELCTR-05B-T

Allegro MicroSystems

ACS714ELCTR-05B-T by Allegro MicroSystems is a current sensor with 8 terminals, operating voltage range of 4.5V to 5.5V, and outputting analog voltage. It has a compact rectangular shape suitable for surface mount applications in various electronic devices like power supplies and battery management systems.

ATS605LSGTN-R-T

Allegro MicroSystems

ATS605LSGTN-R-T by Allegro MicroSystems is a SPEED/DIRECTION SENSOR with 4 terminals, operating b/w -40 to 150°C. It has a supply voltage range of 4-24V and outputs digital voltage via open-drain. Ideal for applications requiring precise speed and direction sensing in various industries.

ADXL345BCCZ-RL

Analog Devices

ADXL345BCCZ-RL by Analog Devices is a 14-terminal accelerometer with output range of 0.36-1.44V, ideal for measuring acceleration in various applications. It operates b/w -40 to 85°C, with supply voltage ranging from 2-3.6V, making it suitable for diverse environments and conditions. The sensor outputs digital voltage signal and features surface mounting option for easy integration into electronic systems.

TARS-LCASS

Honeywell Sensing And Control

TARS-LCASS by Honeywell is an ACCELEROMETER/GYROSCOPE sensor with a PBT body, 90.1mm diameter, and 18.5mm height. It operates b/w -40°C to 85°C, has a digital output, and requires a supply voltage of 4.5V to 5.5V. Ideal for applications requiring precise motion sensing in various environments.

HLSR50-P/SP33

Lem International Sa

Other Sensors/Transducers;

ACS724LLCTR-30AB-T

Allegro MicroSystems

Allegro MicroSystems' ACS724LLCTR-30AB-T is a current sensor with 8 terminals, operating voltage range of 4.5V to 5.5V, and AEC-Q100 screening for automotive applications. It offers analog voltage output, operates b/w -40°C to 150°C, and utilizes BiCMOS technology in a compact rectangular package suitable for surface mount assembly.

ACS733KLATR-65AB-T

Allegro MicroSystems

ACS733KLATR-65AB-T by Allegro MicroSystems is a current sensor with 16 terminals, operating at -40 to 125°C. It provides an analog voltage output and has a supply voltage range of 3.14V to 3.46V. This rectangular surface-mount sensor is ideal for automotive applications due to its AEC-Q100 screening level.

TMCS1101A4BQDT

Texas Instruments

CURRENT SENSOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -40 Cel;

CSCA0500A000B15B01

Honeywell Sensing And Control

CSCA0500A000B15B01 by Honeywell Sensing And Control is a current sensor with a voltage output. It has a max supply voltage of 15.75V and an accuracy of 2%. This sensor is commonly used in applications that require monitoring and measuring electrical currents.

AWM5101VN

Honeywell Sensing And Control

Other Sensors/Transducers;

SCA100T-D01

Murata Manufacturing

INCLINOMETER; Terminal Finish: GOLD;

1230-015A-3L

Ic Sensors

Other Sensors/Transducers;

DHABS/125

Lem International Sa

DHABS/125 by Lem International Sa is a plastic current sensor with 4 terminals. It operates b/w -40 to 125°C, outputting -1-1mA analog current at 4.75-5.25V supply voltage. Ideal for board mounting applications requiring precise current sensing in various environments.

86-030A-C

Ic Sensors

Other Sensors/Transducers;

IVT-S-300-U0-I-CAN2-12/24

Isabellenhuette Heusler & Kg

CURRENT SENSOR;

G-NSDOG2-002

TE Connectivity

TE Connectivity's G-NSDOG2-002 is an inclinometer sensor with 8-30V supply voltage range. It offers ±0.5°C accuracy, -40 to 85°C operating temperature, and analog output. Ideal for applications requiring precise tilt measurement in harsh environments.

T9602-5-A-1

Amphenol

Amphenol T9602-5-A-1 is a humidity sensor with 3.465V max supply voltage, 3.5% accuracy, and analog output. Ideal for applications requiring precise humidity measurements in environments ranging from -20°C to 70°C. Features cylindrical body shape, 4 terminals, and compact dimensions of 41.56mm height and 10.5mm diameter.

CSCA0400A000B15B01

Honeywell Sensing And Control

Honeywell Sensing And Control CSCA0400A000B15B01 is a current sensor with 2% accuracy, voltage output, and 4 terminals. It operates b/w -10°C to 80°C with a supply voltage range of 14.25V to 15.75V. Ideal for applications requiring precise current monitoring in industrial settings.

DS1631AU/TR

Dallas Semiconductor

DS1631AU/TR by Dallas Semiconductor is an 8-terminal sensor with a power supply of 3/5V. It operates b/w -55°C to 125°C, drawing a max current of 1.25mA. Ideal for surface mount applications in various industries due to its plastic/epoxy package body material.

MCS1802GS-05-Z

Monolithic Power Systems

MCS1802GS-05-Z by Monolithic Power Systems is a current sensor with 8 terminals, operating b/w -40°C to 125°C. It offers analog voltage output at a supply voltage range of 3V to 3.6V. This rectangular surface-mount sensor in plastic/epoxy package is ideal for various applications requiring precise current monitoring.