Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

2SS52M-T3

Manufacturer

Honeywell Sensing And Control
Manufacturer's Part Number

2SS52M-T3
Description

MAGNETIC FIELD SENSOR,MAGNETORESISTIVE; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 20mA;
Datasheet

Datasheet

Not In Stock

Popular Products

BAV99

Toshiba

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

43025-0400

Molex

The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.

Details

FDC5614P

Onsemi

FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.

Details

EU2B-YS3203F

Idec

ROTARY SWITCH;

Details

STM32F103C8T6

STMicroelectronics

STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.

Details

SN65HVD234DR

Texas Instruments

SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.

Details

2N2222A

Gec Plessey Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

SMBJ18CA

Thinking Electronic Industrial

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

PIC18F4550-I/P

Microchip Technology

PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.

Details

2N2222A

SPC TECHNOLOGY/ MULTICOMP

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

MMBT2222ALT1G

Onsemi

MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.

Details

SMBJ18CA

Pulse Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

FT232RL-TUBE

FTDI

FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.

Details

DS18B20Z+T&R

Maxim Integrated

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;

Details

ULN2803A

Texas Instruments

ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.

Details

SMBJ18CA

Rectron

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WS

Bytesonic Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138PS,115

NXP Semiconductors

NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.

Details

BSS138NH6327XTSA2

Infineon Technologies

BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.

Details

2N2222A

National Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;

Details

2SS52M-T3 Technical Details

TYPE	DESCRIPTION
Minimum Range Of Magnetic Field:	.4 mT
Package Body Material:	PLASTIC/EPOXY
Maximum Operating Current:	11 mA
Output Range:	20mA
Output Type:	ANALOG CURRENT
Maximum Output Current:	20 A
Sub-Category:	Other Sensors
Housing:	PLASTIC
Output Circuit Type:	SINGLE-ENDED
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	THROUGH HOLE MOUNT
Body Width:	1.6 inch
Sensors or Transducers Type:	MAGNETIC FIELD SENSOR,MAGNETORESISTIVE
No. of Terminals:	3
Package Equivalence Code:	SIP3,.03,50
Maximum Magnetic Field Range:	2.5 mT
Package Shape or Style:	RECTANGULAR
Termination Type:	SOLDER
Output (V):	SINGLE-ENDED
Body Height:	4.5 mm
Body Length/Diameter:	4.5 mm
Maximum Operating Temperature:	150 Cel
Power Supplies (V):	3.8/30

Category Top Products

MMC5603NJ

Memsic

Magnetic Field Sensors;

DRV5032FALPGM

Texas Instruments

Texas Instruments' DRV5032FALPGM is a magnetic field sensor with 3 terminals, operating voltage range of 1.65-5.5V, and hysteresis of 1.5mT. Ideal for applications requiring digital current output in the -40 to 85°C temperature range, such as proximity sensing and position detection in various industries.

SI7211-B-00-IVR

Silicon Labs

MAGNETIC FIELD SENSOR,HALL EFFECT;

A1308KUA-3-T

Allegro MicroSystems

Allegro MicroSystems A1308KUA-3-T is a magnetic field sensor with 4.5-5.5V supply voltage range, -40 to 125°C operating temperature, and 11.5mA max current. Ideal for applications requiring analog voltage output sensing in a compact rectangular package with through-hole mounting.

AH3574-P-B

Diodes Incorporated

MAGNETIC FIELD SENSOR,HALL EFFECT; JESD-609 Code: e3; Terminal Finish: MATTE TIN;

SS496A1-SP

Honeywell Sensing And Control

SS496A1-SP by Honeywell is a magnetic field sensor with 3-inch body width and 1.57mm height. It operates b/w -40 to 150°C, with sensitivity of 2.5 mV/G and output current type as analog. Ideal for applications requiring precise magnetic field detection in compact spaces.

CT100LW-ID6-M

Murata Manufacturing

MAGNETIC FIELD SENSOR,MAGNETORESISTIVE; Terminal Finish: Tin (Sn); JESD-609 Code: e3;

TLV4906KFTSA1

Infineon Technologies

Infineon's TLV4906KFTSA1 is a magnetic field sensor with 18V max supply voltage, 1.5mT hysteresis, and 0-20mA output range. Ideal for applications requiring precise digital current output in a compact rectangular package.

55140-3H-02-A

Hamlin Electronics Europe

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: FLANGE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 20mA; Termination Type: CABLE;

TLE49646MXTSA1

Infineon Technologies

TLE49646MXTSA1 by Infineon is a magnetic field sensor with 3-32V supply voltage, 1mT hysteresis, and 0-25mA current output. Ideal for applications requiring precise magnetic field detection in compact spaces.

TLV49681TBXALA1

Infineon Technologies

Infineon's TLV49681TBXALA1 is a magnetic field sensor with 3-26V supply voltage range, -40 to 125°C operating temperature, and 2mT hysteresis. Ideal for applications requiring current output sensing in environments with magnetic fields up to ±2.3mT.

DRV5013BCELPE

Texas Instruments

DRV5013BCELPE by Texas Instruments is a magnetic field sensor with 38V max supply voltage, 24mT hysteresis, and 0-30mA output range. Ideal for applications requiring digital current output in environments ranging from -40 to 125°C.

A3295KLHLT-T

Allegro MicroSystems

A3295KLHLT-T by Allegro MicroSystems is a magnetic field sensor with 24V max supply voltage, 7mT hysteresis, and 30-60mA current output. Ideal for applications requiring precise detection of magnetic fields in the range of 0.5-7.5 mT, such as automotive sensors and industrial control systems.

AH3582-SA-7

Diodes Incorporated

MAGNETIC FIELD SENSOR,HALL EFFECT; Terminal Finish: MATTE TIN; JESD-609 Code: e3;

DRV5015A2QDBZR

Texas Instruments

DRV5015A2QDBZR by Texas Instruments is a magnetic field sensor with a supply voltage range of 2.5V to 5.5V and hysteresis of 3.6mT, ideal for applications requiring precise current output up to 20mA in temperatures ranging from -40°C to 125°C. This rectangular sensor features an open-drain output type and latched bipolar input mode, making it suitable for surface mount installations in various industries.

VF401

Honeywell Sensing And Control

The Honeywell Sensing And Control VF401 is a magnetic field sensor with dimensions of 1.57" x 4.06mm x 3mm, operating b/w -40°C to 150°C. It features a digital current output interface and uses a wire termination type, making it suitable for various applications requiring precise magnetic field sensing in industrial environments.

MRMS501A-001

Murata Manufacturing

MRMS501A-001 by Murata: Magnetic field sensor with 1.2" width, 0.55mm height, and voltage output range of 0.20-1.60V. Ideal for applications requiring detection of magnetic fields in the range of 0.5-2.5 mT at temperatures from -40 to 85°C using surface mount technology.

A1102LLHLX-T

Allegro MicroSystems

Allegro MicroSystems' A1102LLHLX-T is a Hall effect magnetic field sensor with 3 terminals. It operates b/w -40 to 150°C, with a voltage output and hysteresis of 5.5 mT. Ideal for automotive applications due to its AEC-Q100 screening level and BICMOS technology.

TLE4923HALA1

Infineon Technologies

TLE4923HALA1 by Infineon Tech. is a magnetic field sensor with 18V max supply voltage, 1.5mT hysteresis, and 8.5mV/G sensitivity. It features a digital output interface, suitable for applications requiring precise magnetic field detection in compact spaces like automotive sensors or industrial automation systems.

DRV5011ADDBZT

Texas Instruments

DRV5011ADDBZT by Texas Instruments is a magnetic field sensor with a supply voltage range of 2.5V to 5.5V and hysteresis of 4mT. It features a push-pull current output, operating temperature from -40°C to 135°C, and can detect magnetic fields ranging from -3.8mT to 3.8mT. Ideal for applications requiring precise magnetic field sensing in compact designs.