Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

HRMJ-U.FLP-ST1(40)

Manufacturer

Hirose Electric
Manufacturer's Part Number

HRMJ-U.FLP-ST1(40)
Description

OTHER RF CONNECTOR; Reliability: COMMERCIAL; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
Datasheet

Datasheet

Not In Stock

Popular Products

OHN3140U

Optek Technology

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;

Details

BAV99W-7-F

Diodes Incorporated

Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.

Details

SMBJ18CA

Dc Components

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Shanghai Lunsure Electronic Technology

RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;

Details

2N7002

Nexperia

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;

Details

BAV99

Itt Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MBR0520LT1G

Onsemi

MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.

Details

1N4148

Temic Semiconductors

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

ULN2803A

Allegro MicroSystems

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;

Details

1N4148W-T

Rectron

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

261

Deltrol Controls

Other Relays;

Details

1N4148

Diotec Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM317T

Integrated Power Semiconductors

Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;

Details

NDT2955

Fairchild Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;

Details

1N4148

Daco Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BSS138

Zetex Plc

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;

Details

BSS138

Fairchild Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;

Details

ERJ2RKF1002X

Panasonic

Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.

Details

2N2222A

Bytesonic Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;

Details

SS495A-SP

Honeywell Sensing And Control

SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.

Details

HRMJ-U.FLP-ST1(40) Technical Details

TYPE	DESCRIPTION
Mating Contact Finish:	NOT SPECIFIED
Termination Contact Finish:	NOT APPLICABLE
Connector Type:	OTHER RF CONNECTOR
Contact Material:	NOT SPECIFIED
Sub-Category:	RF Adapters
Reliability:	COMMERCIAL

Category Top Products

GRF1-J-P-08-E-RA-TH1-E

Samtec

The Samtec GRF1-J-P-08-E-RA-TH1-E RF connector has 8 ports, gold-plated contacts, and a dielectric voltage of 700VAC. With a characteristic impedance of 50 ohm, it is ideal for commercial applications requiring high reliability and operating frequencies up to 6 GHz. The right-angle mounting style with solder termination makes it suitable for board mounting in various electronic devices.

128-0711-201

Vertiv

RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Voltage Standing Wave Ratio: 1.3; Maximum Operating Frequency: 6 GHz; Termination Type: SURFACE MOUNT;

R222.423.720

Radiall S A

R222.423.720 by Radiall S A is a RF connector with 0.25" body diameter, 5000000000 ohm insulation resistance, and 0.42 dB insertion loss. It is used in applications requiring a 50 ohm characteristic impedance, such as commercial-grade equipment operating up to 12 GHz frequency with surface mount termination for durability of 1000 cycles.

FFA.00.250.NTAC31

Lemo Usa

FFA.00.250.NTAC31 by Lemo Usa is a SNAP RF CONNECTOR with POLYTETRAFLUOROETHYLENE insulator, 50 ohm impedance, and 1.5 GHz frequency range. Ideal for cable mounting applications requiring low VSWR and solder termination for male plug connectors.

W.FL-R-SMT-1(10)

Hirose Electric

W.FL-R-SMT-1(10) by Hirose Electric is a RF connector with gold termination, 50 ohm impedance, and 6 GHz operating frequency. Ideal for board mounting applications in electronics, it offers high insulation resistance of 500M ohm and durability of 20 cycles.

SMP-FR-C07

Amphenol

The Amphenol SMP-FR-C07 is an RF SMP connector with a body diameter of 0.187" and depth of 0.27". Featuring a max operating frequency of 26.5 GHz, it has a VSWR of 1.35 and operates b/w -65°C to 165°C. Ideal for applications requiring a right-angle mounting style, this female socket connector has a characteristic impedance of 50 ohms.

15440

Corning

RF CONNECTOR; Contact Gender: FEMALE; MIL Conformity: NO; Filter Feature: NO; DIN Conformance: NO; Panel Mount: NO;

SF1521-60124

Sv Microwave

SF1521-60124 by Sv Microwave is a threaded RF connector with 0.253 dB insertion loss, 50 ohm impedance, and 40 GHz max frequency. Ideal for board and panel mounting in applications requiring reliable signal transmission at temperatures ranging from -65 to 165°C.

BJ3159AC-201

Vertiv

Other RF Connectors; Reliability: COMMERCIAL; Contact Gender: FEMALE; Manufacturer Series: BJ3159; Shell Material: BRASS; Shell Finish: NICKEL;

1-1393662-2

TE Connectivity

TE Connectivity 1-1393662-2 RF Connector features 50 ohm impedance, 200M ohm insulation resistance, and 1.22 VSWR. Ideal for board and panel mounting in applications up to 2 GHz frequency, with DIN conformance and solder termination.

73415-5740

Molex

Molex 73415-5740 RF SMP Connector features SNAP coupling, PTFE insulator, gold finish, and brass shell. With 50 ohm impedance and 40 GHz frequency, it's ideal for high-frequency applications. Suitable for surface mount board mounting with male contact gender in plug style.

PL155-32

Vertiv

RF TRB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body or Shell Style: PLUG; Total No. of Contacts: 1; Termination Type: CRIMP;

4710-5007-00

TE Connectivity

TE Connectivity 4710-5007-00 RF Connector features 0.24" body diameter, 50 ohm impedance, and 1.05 VSWR. Ideal for commercial applications with a max frequency of 28 GHz, this panel-mount connector has a TFE insulator and gold shell finish for reliable performance in temperatures ranging from -65 to 105°C.

SMP-MSLD-PCS-2

Amphenol

RF SMP CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;

CJT-T-P-HH-RA-TH1

Samtec

Samtec's CJT-T-P-HH-RA-TH1 RF connector features gold termination, 0.428" body depth, and snap coupling. Ideal for commercial applications, it offers 100 ohm impedance and operates up to 4 GHz frequency. This male coaxial jack with solder termination is designed for board mounting with locking option.

U.FL-R-SMT-1(60)

Hirose Electric

U.FL-R-SMT-1(60) by Hirose Electric is a surface mount RF connector with a body length of 0.122 inch, body width of 0.118 inch, and body depth of 0.049 inch. It has a max operating frequency of 6 GHz and is commonly used in commercial applications requiring a characteristic impedance of 50 ohm.

HRMJ-U.FLP-ST1(40)

Not In Stock

Popular Products

OHN3140U

BAV99W-7-F

SMBJ18CA

1N4148

2N7002

BAV99

MBR0520LT1G

1N4148

ULN2803A

1N4148W-T

261

1N4148

LM317T

NDT2955

1N4148

BSS138

BSS138

ERJ2RKF1002X

2N2222A

SS495A-SP

HRMJ-U.FLP-ST1(40) Technical Details

Category Top Products

GRF1-J-P-08-E-RA-TH1-E

128-0711-201

R222.423.720

FFA.00.250.NTAC31

W.FL-R-SMT-1(10)

SMP-FR-C07

15440

SF1521-60124

BJ3159AC-201

1-1393662-2

73415-5740

PL155-32

4710-5007-00

SMP-MSLD-PCS-2

CJT-T-P-HH-RA-TH1

U.FL-R-SMT-1(60)

3211-40024

3811-40003-TD

RSP-122811-02

SMP-MSLD-PCS-16