Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

DF22-4S-7.92C(28)

Manufacturer

Hirose Electric
Manufacturer's Part Number

DF22-4S-7.92C(28)
Description

POWER CONNECTOR; Reliability: COMMERCIAL; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e4; MIL Conformity: NO; DIN Conformance: NO;
Datasheet

Datasheet

Not In Stock

Popular Products

PAP-06V-S

J S T Mfg

PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.

Details

LM7805CT

Comset Semiconductors

Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;

Details

1N4148

Bytesonic Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BSS138

Philips Semiconductors

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;

Details

LM555CM

Texas Instruments

LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.

Details

LM358AN

Fairchild Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

BAV99W-7-F

Diodes Incorporated

Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.

Details

LM358DT

ROHM

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Synsemi

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

STM32F405RGT6

STMicroelectronics

STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.

Details

C0603C104K5RACAUTO

KEMET Corporation

KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.

Details

CRCW040210K0FKED

Vishay Intertechnology

Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.

Details

USB3320C-EZK-TR

Microchip Technology

Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.

Details

ESD5Z5.0T1G

Onsemi

ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.

Details

OPA2277UA/2K5E4

Texas Instruments

OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.

Details

MMBT3904LT1G

Onsemi

MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.

Details

MBRS130LT3G

Onsemi

MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.

Details

87832-1420

Molex

87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.

Details

LM555CN

Texas Instruments

LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.

Details

1N4148WS

Sensitron Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

DF22-4S-7.92C(28) Technical Details

TYPE	DESCRIPTION
Mating Contact Finish:	NOT SPECIFIED
MIL Conformity:	NO
Termination Contact Finish:	Gold (Au)
IEC Conformity:	NO
Connector Type:	POWER CONNECTOR
Contact Material:	NOT SPECIFIED
Sub-Category:	Headers and Edge Type Connectors
Reliability:	COMMERCIAL
DIN Conformance:	NO
JESD-609 Code:	e4

Category Top Products

PES-06-01-S-VT-LC

Samtec

Samtec's PES-06-01-S-VT-LC is a rectangular power connector with 6 contacts, featuring liquid crystal polymer insulation and matte tin finish. With a dielectric voltage of 1350VAC, it operates b/w -55 to 125°C. Ideal for split board lock mounting in commercial applications requiring high durability and reliability.

DF22L-2P-7.92DSA(05)

Hirose Electric

DF22L-2P-7.92DSA(05) by Hirose Electric is a power connector with 2 contacts, Tin/Copper finish, and GLASS FILLED POLYAMIDE insulator. It has a temperature range of -35 to 85°C and UL94V-0 flammability rating. Ideal for board mounting applications requiring male blade pin-skt connectors.

1723163110

Molex

RECTANGULAR POWER CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;

105307-1203

Molex

Power Connectors;

76825-0004

Molex

Molex 76825-0004 is a rectangular power connector with liquid crystal polymer insulator. It features matte tin finish over nickel, rated for 23A signal current. Ideal for board mounting applications in electronics, operating b/w -40°C to 105°C temperature range.

44914-1801

Molex

Molex 44914-1801 is a rectangular power connector with 18 contacts, 2 rows, and TIN over nickel finish. It has a mating contact pitch of 0.118", body width of 0.29", and insulator made of glass-filled liquid crystal polymer. Ideal for board mounting applications in commercial settings due to its UL certification and polarization key for secure connections.

1-770174-1

TE Connectivity

TE Connectivity's 1-770174-1 is a rectangular power connector with 4 contacts, rated at 600V and 9.5A. Featuring POLYAMIDE insulation material, it has a durability of 500 cycles and operates b/w -55 to 105°C. Ideal for board mounting applications requiring reliable male contact pins in commercial settings.

03-09-1041

Molex

The Molex 03-09-1041 is a rectangular power connector with a body width of 0.34 inch and depth of 1 inch. It has an insulator material made of POLYAMIDE and can operate in temperatures ranging from -55 to 105 °C. This connector, with a total of 4 contacts, is commonly used in panel mounting applications.

39-29-9107

Molex

The Molex 39-29-9107 is a rectangular power connector with a body length of 0.87", width of 0.38", and depth of 0.5". It has an insulation resistance of 1GΩ, dielectric voltage withstand of 1500VAC, and operates in temperatures ranging from -40°C to 105°C. This connector is commonly used in board mounting applications for commercial purposes.

1-480424-0

TE Connectivity

TE Connectivity's 1-480424-0 is a rectangular power connector with a body length of 1.038in, insulation resistance of 500MΩ, and operating temperature range from -55°C to 105°C. It is commonly used in power applications requiring a durable and reliable connection.

643414-1

TE Connectivity

TE Connectivity 643414-1 is a Power Connector with 0.8"x.3"x.3" dimensions, POLYAMIDE insulator, and Tin termination finish. Rated for 12A current, it's used in board mounting applications for power connections at -40 to 105°C temperatures.

M300-2240696F2

Harwin Plc

The Harwin PLC M300-2240696F2 is a rectangular power connector with 6 contacts, rated for 10A signal current. It features glass-filled polyamide insulation, operates b/w -65°C to 175°C, and has a durability of 1000 cycles. Ideal for commercial applications requiring reliable power connections.

39-01-2106

Molex

The Molex 39-01-2106 is a rectangular power connector with 10 contacts, POLYAMIDE66 insulator material, and dielectric voltage of 2200VAC. It is used in commercial applications for cable and panel mounting, featuring a durability of 30 cycles and operating temperatures ranging from -40 to 105°C.

44441-2006

Molex

The Molex 44441-2006 is a rectangular power connector with a mating contact pitch of 0.295 inches. It has a body length of 1.803 inches and insulation resistance of 1,000,000,000 ohms. This connector is commonly used in commercial applications for power connections requiring crimp termination and polarization key housing.

2004561214

Molex

RECTANGULAR POWER CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;

1723104103

Molex

Molex 1723104103 Power Connector features Liquid Crystal Polymer insulator, -40 to 105°C operating temp, and UL 94V-0 flammability. With male SQ pin-skt contacts, it's ideal for board mounting applications requiring a compact 0.543" x 0.352" x 0.614" size.

350209-1

TE Connectivity

TE Connectivity's 350209-1 is a rectangular power connector with 0.2" mating contact pitch, suitable for board mounting. It features a 12A signal current rating, POLYAMIDE insulator material, and operates b/w -55 to 105°C. Ideal for commercial applications requiring durable power connections.

19-09-1039

Molex

The Molex 19-09-1039 is a rectangular power connector with a mating contact pitch of 0.264". It has a dielectric voltage rating of 5000VAC and can operate in temperatures ranging from -40 to 105°C. Ideal for commercial applications, it features a polarized housing, crimp termination, and can accommodate wire sizes from 30 to 14 AWG.

39-01-4046

Molex

Molex 39-01-4046 is a rectangular power connector with 4 contacts, POLYAMIDE66 insulator, and 2200VAC dielectric voltage. It has a temperature range of -40 to 105 °C and is suitable for commercial applications requiring durable crimp termination connectors.

43045-2400

Molex

The Molex 43045-2400 is a rectangular power connector with 24 contacts, rated at 5A signal current. It features a mating contact pitch of 0.118", insulation resistance of 1Gohm, and operates b/w -40°C to 105°C. Ideal for board mounting applications requiring durability and reliability under commercial standards.