Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

52003

Manufacturer

Helukabel
Manufacturer's Part Number

52003
Description

WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; Application: ELECTRICAL EQUIPMENT UNDER DRY, DAMP, AND WET CONDITION; Cross Section Area: 4 mm2; Insulator Material: POLYETHYLENE POLYMER;
Datasheet

Datasheet

Not In Stock

Popular Products

1N4148

Panjit International

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

AB26TRB-32.768KHZ--T

Abracon

AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.

Details

AT90CAN128-16AUR

Microchip Technology

AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.

Details

BAV99

Bkc Semiconductors

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

STM32H743IIT6

STMicroelectronics

STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).

Details

261

Mercury Systems

Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;

Details

SMBJ18CA

Onsemi

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WS

Continental Device India

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002

Unisonic Technologies

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;

Details

1N4148W-T

Micro Commercial Components

1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.

Details

EU2B-YS303C

Idec

ROTARY SWITCH;

Details

1N4148

Excel (Suzhou) Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148WS

First Components International

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM107H

General Electric Solid State

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;

Details

BAV99

Itt Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM7805CT

National Semiconductor

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;

Details

2N7002

Nte Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;

Details

2N7002

Sinyork

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;

Details

LM107H/883C

National Semiconductor

LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.

Details

SMBJ18CA

Vishay Intertechnology

Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.

Details

52003 Technical Details

TYPE	DESCRIPTION
Wire Gauge (AWG):	12
Construction:	STRANDED
Jacket Material:	POLYETHYLENE POLYMER
IEC Conformity:	NO
Approvals (V):	CE; DIN VDE 0250
Shielding:	NO
Rated Voltage:	300 V
Cross Section Area:	4 mm2
MIL Conformity:	NO
Wire & Cable Name:	POWER AND CONTROL CABLE
Connector Accessory Type:	WIRE AND CABLE
Insulator Material:	POLYETHYLENE POLYMER
No. of Conductors:	4
Conductor Material:	BARE COPPER
Maximum Operating Temperature:	70 Cel
Application:	ELECTRICAL EQUIPMENT UNDER DRY, DAMP, AND WET CONDITION
DIN Conformity:	YES
Diameter:	13.3 mm

Category Top Products

U.FL-2LP-088K1T-A-(100)

Hirose Electric

U.FL-2LP-088K1T-A-(100) by Hirose Electric is a stranded electrical wire with a fluorinated ethylene propylene jacket and shielding. It has a rated voltage of 60V and is commonly used in wireless transmission devices and electronic measuring devices.

982661014

Molex

Molex 982661014 flat cable with UL approval, rated for 60V, features tin finish copper alloy conductor and polyester insulator. Suitable for applications requiring a max operating temperature of 105°C and min of -40°C, this 0.03 mm2 cross-section cable has 31 conductors and is ideal for low current (0.5A) electrical wiring needs.

5875WH005

Alpha Wire

Alpha Wire's 5875WH005 is a stranded electrical wire with silver finish, rated at 1000V. Featuring PTFE insulation, it operates b/w -60 to 200°C. Ideal for flexible cords and fixtures due to its copper alloy conductor, 0.326mm² cross-section area, and 0.046 ohm resistance.

282096-000

TE Connectivity

TE Connectivity's 282096-000 wire is rated for 1000V with TIN finish, suitable for applications requiring flexibility. With a conductor made of copper alloy and operating temperatures ranging from -65 to 150°C, it is ideal for fixtures and cords in various electrical setups. The wire has a diameter of 1.37mm, stranding of 19X34, and supports up to 22 AWG size cables.

55A0111-22-0

TE Connectivity

TE Connectivity's 55A0111-22-0 is a stranded electrical wire with a rated voltage of 600V and max operating temperature of 150°C. It is constructed with tin-finished copper alloy conductor and has a wire gauge of 22 AWG. This flexible cord and fixture wire is commonly used in applications requiring CSA, CAA, MIL, and UL approvals.

44A1121-24-0/9-9-MX

TE Connectivity

TE Connectivity's 44A1121-24-0/9-9-MX cable is a stranded, shielded wire with a rated voltage of 600V. It features a tin conductor finish and is suitable for general purpose applications at temperatures ranging from -65 to 150°C. With a wire gauge of 24 AWG and copper alloy construction, it is ideal for use in flexible cords and fixture wiring.

52265

Helukabel

WIRE AND CABLE; Rated Voltage: 450 V; Shielding: YES; Insulator Material: CROSS-LINKED POLYOLEFIN-COPOLYMER; Conductor Material: COPPER ALLOY; IEC Conformity: NO;

22690

Helukabel

WIRE AND CABLE; Rated Voltage: 600 V; Shielding: YES; No. of Conductors: 4; Minimum Operating Temperature: -40 Cel; Wire Gauge (AWG): 16;

151660317

Molex

Molex 151660317 is a UL-approved flat cable with a rated voltage of 60V. It features a tin conductor finish, polyester insulator material, and can operate b/w -40 to 105 °C. With 30 conductors and a wire gauge of AWG37, it is suitable for various electrical wiring applications.

111005-1040

Molex

CABLE ASSEMBLY;

89841002500

Belden

WIRE AND CABLE;

T4161110002-003

TE Connectivity

TE Connectivity T4161110002-003 is a shielded communication cable with 22 AWG copper alloy conductor. Rated for 250V DC, it can handle up to 4A current. Suitable for straight mounting with M12 screw option, ideal for electrical applications requiring reliable signal transmission.

TTL-232R-3V3-WE

FTDI

The FTDI TTL-232R-3V3-WE cable assembly has 6 conductors, USB to UART connectors, and operates b/w -40°C to 85°C. It is ideal for instrumentation and control applications due to its CE and UL approvals. With a wire gauge of 24 AWG, diameter of 5mm, and length of 1.8m, it offers reliable connectivity in various setups.

M22759/11-22-9

Axon Cable Sas

WIRE AND CABLE; Rated Voltage: 848 V; Shielding: NO; DIN Conformity: NO; IEC Conformity: NO; Maximum Operating Temperature: 200 Cel;

CS-SASSASEXT2-001

Amphenol

CABLE ASSEMBLY;

1750510B1

Volex Plc

The Volex Plc 1750510B1 power cable is rated for 125V, 15A with a wire gauge of 14 AWG. It has CSA, CUL, UL approvals and PVC jacket material. Ideal for connecting NEMA5-15P to IEC60320 C13 in applications requiring a max operating temperature of 60°C.

68801-1984

Molex

CABLE ASSEMBLY;

U050-010

Tripp Lite

CABLE ASSEMBLY;

M22759/16-10-9

Carlisle Interconnect Technologies

M22759/16-10-9 by Carlisle IT is a MIL-approved stranded wire with 600V rating, ETFE insulation, and copper conductor. Ideal for aerospace applications, it operates b/w -55°C to 150°C. Features include 10 AWG size, 3.61mm diameter, and resistance of 0.004 ohm.

ACW0219-0.75-42(NS)

TE Connectivity

TE Connectivity's ACW0219-0.75-42(NS) is a stranded electrical wire with 18 AWG bare copper conductor, rated for 50V and operating temperatures from -40 to 150°C. Ideal for primary wire applications, this flexible cord has a cross-section area of 0.75mm2 and a diameter of 1.8mm, suitable for various electrical installations.